Most homes in this area have a Pressure Reducing Valve (PRV) located either in the house or in a vault outside. A PRV is part of your plumbing system and reduces the water pressure delivered to your to your home. As the PRV ages, it can begin to fail which is usually evident by either an increase or decrease in water pressure within the home. PRV failures can happen rapidly or slowly over time. It is strongly suggested that you inspect you PRV it to make sure it is still functioning, or hire a plumber to inspect the PRV.

The inspection line phone number for Water is 360-403-3526. For Sewer it is 360-403-3508. For Stormwater it is 360-403-3523. Please give 48 hours notice.

Whether you are inquiring about a new plat, single family/multi family residence or commercial/industrial business, please contact the Permit Center at 360-403-3551. There are a number of different factors involved such as; where the property is located, inside/outside city limits, recovery fees, sidewalk or road cuts, type of use, etc.

Most homes in this area have a Pressure Reducing Valve (PRV) located either in the house or in a vault outside. A PRV is part of your plumbing system and reduces the water pressure delivered to your to your home. As the PRV ages, it can begin to fail which is usually evident by either an increase or decrease in water pressure within the home. PRV failures can happen rapidly or slowly over time. It is strongly suggested that you inspect you PRV it to make sure it is still functioning, or hire a plumber to inspect the PRV.

FEBCO Series 860 Small reduced pressure zone assemblies feature a flood sensor with SentryPlus Alert® Technology to detect excessive water discharge from the relief valve. Activated through an add-on connection kit, the sensor also triggers the alert system sending notification of flood detection to facility personnel. Connection kits are available for BMS and cellular communication.This series prevents the reverse flow of contaminated water caused by backsiphonage or backpressure from entering the potable water supply. Ideal for protection at health hazard cross-connections or for non-potable service applications such as irrigation, fire line, or industrial processing. Small diameter sizes 1/2 to 2 inch.To Learn more visit: https://www.watts.com/floodprotectionsystem/

View a brochure explaining PRV (PDF) and how it protects your plumbing fixtures. Failure to install a PRV or to inspect and adjust an existing PRV may cause damage to your plumbing fixtures. If you have any further questions about this increase/decrease in water pressure, please feel free to contact Arlington Public Works at 360-403-3526.

View a brochure explaining PRV (PDF) and how it protects your plumbing fixtures. Failure to install a PRV or to inspect and adjust an existing PRV may cause damage to your plumbing fixtures. If you have any further questions about this increase/decrease in water pressure, please feel free to contact Arlington Public Works at 360-403-3526.

This series prevents the reverse flow of contaminated water caused by backsiphonage or backpressure from entering the potable water supply. Ideal for protection at health hazard cross-connections or for non-potable service applications such as irrigation, fire line, or industrial processing. Small diameter sizes 1/2 to 2 inch.

If you are moving into a residence / business call Utility Billing at the Finance Department at 360-403-3421 to start an account. If you have finished doing repair work call the Public Works Department at 360-403-3526.

For product-specific approval information, please refer to the product’s specification sheet (see literature section above) or ask a Watts representative. For general information regarding any approval certification partners identified in the specification sheet, please visit our certification partners’ websites:

FEBCO Series 860 Small reduced pressure zone assemblies feature a flood sensor with SentryPlus Alert® Technology to detect excessive water discharge from the relief valve. Activated through an add-on connection kit, the sensor also triggers the alert system sending notification of flood detection to facility personnel. Connection kits are available for BMS and cellular communication.