Snow meltingsystemsfor concrete slabs

ContactorPro Panels simplify wiring for electric snow melting systems. Panels energize ProMelt Mats or Cable when the connected Snow Melting Control detects snow Built-in transformer supplies power for control Choose from 50, 100 or 200 Amp panels

ProMelt controls and sensors ensure the system operates as soon as snow is detected, keeping entries, sidewalks and other spaces free from snow and ice.

Every precaution has been made to make sure the above calculator is accurate. However, we cannot guarantee the calculations you make are appropriate for your applications and online calculations could produce erroneous figures. If you do see figures that you are unsure about, please don't hesitate to contact us.

Commercial snow meltsystems

ProMelt Cables provide a flexible option for melting snow and ice on curves, stairs, and free-form areas. They are easily installed for use with concrete, pavers, asphalt, or tile. Attach to rebar or rewire with cable ties for new concrete or secure to existing concrete with CableStrap For use with concrete, pavers, asphalt or tile Cable is spaced at 3" OC for 50 watts/ft2 and output or 4" OC for 38 watts/ft2 Select from 120, 208, 240, or 277 VAC cables

Welcome to our Velocity of Fluid in Pipe (m/s) hydraulic calculator, a handy tool when designing hydraulic systems. This pipes and hoses formulae calculator allows you to input the Flow Rate (Q) in l/min and the Pipe Diameter (d) in mm to obtain the corresponding Velocity (m/s). To ensure optimal system performance, it's crucial to consider the recommended fluid velocity ranges. For suction lines, the recommended range is 0.625m/s – 1.25m/s, for pressure lines it's 2.1m/s – 4.75m/s, and for return lines, it's 1.5m/s - 3m/s. These ranges are based on oils with a maximum viscosity grade of 70 cSt at 38°C, operating between 18°C and 51°C. Additionally, please note that for pipe runs greater than 10m, the pipe size should be increased proportionally. Furthermore, it's important to keep the intake line length under 1m.

ProMelt controls and sensors ensure the system operates as soon as snow is detected, keeping entries, sidewalks and other spaces free from snow and ice. Options for fully automatic operation or automatic start with timed melting In-slab or aerial sensors Control options from 30 to 200 amps per unit All-in-one control for smaller systems 24 VAC control with connection to ContactorPro for larger systems

Hydronic snow melt system

ProMelt Cables provide a flexible option for melting snow and ice on curves, stairs, and free-form areas. They are easily installed for use with concrete, pavers, asphalt, or tile.

Electric snow melt system

Hydronic snow melt system design

Note: For pipe runs greater than 10m the pipe size should be increased correspondingly. The intake line should never exceed 1m in length.

Now you can enjoy the beauty of winter while an electric snow melting system handles the ice and snow on your walkway and driveway. ProMelt electric snow melting mats are easily installed below outside surfaces.

Now you can enjoy the beauty of winter while an electric snow melting system handles the ice and snow on your walkway and driveway. ProMelt electric snow melting mats are easily installed below outside surfaces. Mats eliminate the need to secure every row of cable Fastest installation option for rectangular shaped areas Embed in concrete, asphalt or sand for snow melting or patio heating Choice of voltages, mat widths, and 38 or 50 Watt per square foot capacity

Hydrastore use cookies to make the site run smoothly, enhance the content and to gather information on how you use it in order to improve and personalise your experience. See our Privacy Policy