In more rural areas where your pro needs to travel further, you’ll pay additional travel fees depending on how they charge.

For example, water main replacement costs fall on you in a DIY situation if you hurt the pipe entering your home. Hiring a pro means their insurance usually covers any accidental damage. In some places, you’ll need to check with the city before installing a pressure-reducing valve outside your home.

In most cases, “water pressure regulators” and “water pressure reducing valves” are used interchangeably. A regulator helps to regulate the pressure throughout a home or building, while a reducer simply reduces the incoming pressure below 80 PSI.

You’ll pay $20 to $150 for a direct-acting water pressure reducing valve. Inexpensive and easy to maintain, they’re found in most homes. These bell-shaped valves sometimes have a pressure gauge already attached.

You can expect your valve to last 10 to 12 years on average, but some contractors recommend swapping it out as often as every five years. Schedule a water flow inspection and maintenance every one to three years and your valve may last 20 years or more.

That said, it's a good idea to leave any new installs to the pros. This requires cutting into an existing line, soldering in fittings, and installing the pressure-reducing valve.

On average, water pressure regulator replacement costs $350 or between $250 and $450. You’ll pay an additional $100 to $300 for after-hours, weekends, holidays, or projects with access issues.

You’ll save $150 to $300 on labor doing this project yourself, but you’ll need some basic tools, such as pipe wrenches, a soldering kit, and a torch. We don’t recommend DIY attempts unless you have basic plumbing experience, as improper installation can lead to thousands of dollars of damage.

Order Febco Backflow Preventer, Size 2", 175 psi, 2 825Y-QT RP at Zoro.com. Great prices & free shipping on orders over $50 when you sign in or sign up for ...

Labor runs from $200 to $350, depending on your area and how hard it is to access. Most plumbers charge an hourly rate of $45 to $200 and allot about three hours for completing the project.

Water pressure reduction valves, also called water pressure regulators, come in three distinct types, costing from $20 to $3,000, not including labor.

Although the average price for a water pressure-reducing valve costs $350, your fees vary slightly depending on how far your plumber must travel. Most have a standard radius of service, often 10 to 20 miles. You won’t pay anything extra if you live within that range.

Yes, a water pressure regulator saves you between $50 and $450 per year since you’ll use approximately ⅓ less water. You’ll save on both water usage and heating water.

Normal home water pressure is 55 to 60 PSI. Some water heater manufacturers void their warranty if the pressure exceeds 80 PSI. Anything below 40 PSI is considered too low, although it likely won’t cause damage.

Combined water-reducing valves with backflow preventers cost $150 to $3,000 or more. Required to protect drinking water from contamination. Common uses include irrigation, fire suppression systems, and large boiler systems.

It’ll cost $50 to $125 on average to install this yourself. Water pressure regulators run $25 to $75, plus another $25 to $50 in solder and tools. A contractor will complete the same job for $350 on average, which covers labor, gas, and overhead expenses. You may be able to get this price wrapped into other project fees, like water main repair costs.

If you hear a hard bang when shutting off your water, you likely need one installed or the one you have serviced. Building code requires a valve installed in areas with pressure over 80 PSI. Most homes already have them. However, with new construction and changing water demands in your area, pressures may fluctuate, and you’ll need to install one later. You’ll find it near where the water enters your home.

Most hardware and home improvement stores sell pressure gauges with hose-thread connections. You can use these to check pressure at hose bibs, washing machine connections, and water heater drains.

Water pressure regulator replacement costs range from $50 to $450, or more if you need it done fast (such as to combat an emergency plumbing leak or water damage). Labor makes up much of the price estimate, making this a rewarding—and cost-effective—DIY project if you have the experience and tools to do it. But you’ll need to understand low water pressure, both why it happens and how to fix it, or risk harming your plumbing.

Buy surplus and used MUELLER 1215.

VCN-530C L. Table, Table size, 1300 mm × 550 mm. Max. loading weight(equal distribution), 1200 kg. Spindle, Tool shank, BT40. Max. spindle speed, 12000 min-1.

You’ll spend $100 to $300 extra if you need plumbing replaced after hours, such as on evenings, holidays, or weekends. You can avoid these fees by having your water pressure regulator valve checked during your annual inspection.

Spirax Sarco US Vacuum Breakers reduce unplanned maintenance by protecting your steam plant & equipment against vacuums. Find out more here.

WATTS PLT-5-M1 Expansion Tank, 2.1 Gal Tank Capacity, 3/4 Inch Connection, 20 PSI Precharge Pressure. Item: CU9TVT. Model: PLT-5-M1. Cross Ref: 793UY2. In Stock.

Also called a pressure-reducing valve, each valve costs $50 to $100 on average, but can hit $200 for most single-family homes. You might pay up to $3,000 for a combined reduction valve and backflow preventer and $3,000 to $25,000 for commercial properties.

Pilot-operated water regulating valves cost $500 to $3,000. These are the better choice for high-volume flows, typically found in commercial and high-rise installations.

Extremely quiet and energy-efficient, the Watts Hot Water Recirculation System utilizes thermal bypass technology to instantly supply hot water in about 15 ...

FLOWMETER, LFSC-i25X-001, TUBE 3/4" x 1 - Find MSDS or SDS, a COA, data sheets and more information.

Replacing an existing valve makes for a good DIY project with a straightforward process. You’ll undo the fittings, then replace your unit with the same brand and model—or one of identical size.

MADE FOR YOUR GAS DRYERS - Appliance Pros' Flexible Dryer Vent Hose features quality tubing that's mainly designed for gas dryers. Not intended for gas ...

The best way to know is to hire a local plumber to test your pressure, inspect your plumbing, and do any needed maintenance. You can also buy a simple water pressure tester at the local home improvement store. If you have city water, you’ll need to test multiple times for the most accurate reading, as city water pressure can fluctuate as the load goes up or down.

Most water regulator valves cost $25 to $75. However, larger models with backflow valves and multiple outlets range up to $1,600. Commercial sizes for multi-unit homes can run over $3,000.

This 2 inch lead free Y pattern reduced pressure zone backflow preventer assembly prevents the reverse flow of high hazard (toxic) fluids found in the water from entering into the potable water supply due to backsiphonage and or backpressure. It is used in water services to industrial plants, hospitals, morgues, mortuaries, and chemical plants and is also used in irrigation systems, boiler feed, water lines and other installations requiring maximum protection. This assembly consists of a lead free body, threaded quarter turn ball valves, test cocks, spring loaded Y pattern check valves, and one hydraulically dependent differential relief valve. This backflow assembly contains a flood sensor with SentryPlus Alert(R) technology to detect excessive water discharges from the relief valve. When activated through an add-on sensor connection kit, the flood sensor can send an alert to notify personnel about potential flooding. Add-on sensor connection kits are available for BMS and cellular communications.

... Laundry Sinks; Kitchen and Laundry Tapware; Kitchen Accessories; Food Waste ... Reln Drain Trench - Large Drain - 350mm. In-Store Pickup Only. SKU: 000884 ...

Water pressure regulators change based on the type of building you’re in. Keep in mind that these prices reflect the size and difficulty of the installation. Multi-unit buildings, like apartments or condos, may have multiple valves placed in parallel or in sequence. Unless you own the apartment building you live in, you’ll likely never be responsible for the fees associated with a commercial install.

2024818 — How Y Strainers Work ... A Y strainer is a type of mechanical filter used in pipelines to remove unwanted solids from liquids, gases, or steam. It ...

2 IN Lead Free Bronze Reduced Pressure Zone Backflow Preventer Assembly, Quarter Turn Shutoff, Y Pattern, Backflow Flood Sensor

"Many PRVs have union connections which do not require special tools to assemble/take apart,” says Jeff Botelho, plumber at Harold Brothers Mechanical Contractors, Inc. “However, union connections are sometimes only on one side of the PRV, with a threaded or soldered connection at the opposite end. Threaded connections are simple enough for most DIYers to handle. Just make sure to use the appropriate thread sealing tape and/or compound to seal the threads."