Pressure regulator repair kit for Jaguar 8.4, Jaguar Cub, Mytee Vortex Lite, Escape, Escape Plus, Speedsters and various other portables and truck mounts using the MV500 Regulator

Zurn Wilkins Model 70Repair Kit

► UniCollar—This is a collar that is available as a continuous strip and is cut to the necessary length to install around pipes or conduits.

Wilkins Model 70Repair Kit1 Inch

A variety of fire collars are available for different applications. In general these collars are placed around pipes or conduits in buildings. These collars provide up to four hours of fire protection.

► Retrofit Collars— As the name suggests these collars are retrofitted around pipes or conduits in existing buildings. They are available in 40mm—300mm diameter

wilkins model 70repair kit3/4 inch

The team at Monospray has undertaken extensive installations of passive fire protection systems for riser shafts and penetrations in buildings. We also supply the material required for installation by tradespersons.

Protecting cables and mechanical services is required to maintain essential services in a building. Air-conditioning and ventilation ducts need to be protected to prevent the propagation of flames, fumes and smoke in buildings. The main options for protecting these assets are Vermiculite Fire Spray, Fire Blankets or Fire rated boards.  The choice is made depending on the position of the ductwork and cable trays, the duration of fire protection required and  the complexity associated with the installation work.

Wattswater pressure regulator repair kit

► In floor waste collars—These collars are used to prevent passage of smoke and fumes around waste pipes.  They are available in a variety of sizes from 50mm —100mm diameter and are available for installation during the construction phase or to be retrofitted in existing buildings.

Buildings also generally segregated into sections with a solid fire barrier between these sections.  Services that are provided to these sections are located in penetrations made through fire barriers. To prevent the spread of flames, smoke and fumes all penetrations in riser shafts and in fire barriers need to be sealed. The are a number of fireproofing products that are available to seal penetrations. The choice of which product is used is made based on a number of factors such as size and location of the penetration, need for future access or expansion etc.

Passive fireproofing in buildings is a requirement under the Building Code of Australia and is achieved by implementing a number of different solutions. Based on a number of factors such as the duration of fire resistance, aesthetic requirements etc. specific solutions are available for the different elements in a building.

WattsregulatorN35BRepair Kit

watts 3/4water pressure regulator repair kit

In case of a fire in a building containing the spread of the fire, smoke and fumes is essential to protect lives and assets. Generally all essential services in buildings are located in vertical riser shafts.

Fire mortar is specially formulated to seal penetrations is floor slabs and walls around services that have been installed or to seal areas where services have been removed.  The cement based compound can be towelled into the opening to provide a smooth finish with the slab or wall. This compound has a fire rating of up to four hours.

Fire sealants are caulkable materials which are used to seal around services which pass through penetrations. They are used to close gaps between floor levels or in fire barrier walls.  They provide up to four hours fire protection are installed either during the construction phase or in existing buildings.

Fire pillows are installed around cables and non-combustible pipes which go through penetrations in walls or floor slabs. Fire pillows are a versatile product which can be removed to permit additional services to be installed through existing penetrations. They come in a variety of sizes and generally offer up to three hours of fire protection.

The strips are specifically made with intumescent material bonded with foam and are used in expansion joints in a building. They provide up to four hours fire protection and are suitable for joints in both masonry and concrete walls or concrete floors.

► Wall Collars—This is a collar installed around pipes or conduits passing through penetrations made in fire barrier walls.  These are available in 40mm—150mm diameter and are installed either during the construction phase or in existing buildings.