The RP45 series pressure reducing valves are single seated, bellows sealed controllers that operate without auxiliary energy. Designed for use with steam, compressed air, and other gases compatible with the construction. These valves are particularly suitable for reducing steam pressure in all energy and process systems where pressures must be kept under control.

RPZ Backflow Preventerprice

The RP45TW series pressure reducing station consists of two standard RP45 valves installed in parallel. This system is particularly recommended for installations where a single valve cannot reach the maximum required flow rate or when the consumption variation is significant, being prudent to install two smaller valves instead of a single one in order to avoid oversizing. This system is also recommended when it is vital that the steam supply is not interrupted.

The ADCA P20DS is a series of direct acting, spring loaded, diaphragm sensing balanced plug pressure reducing valves. These regulators are particularly suitable for general purpose applications where low flow and high temperatures are involved and have been especially designed for use with steam.

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

The ADCA PS4 is a series of direct acting, spring-loaded diaphragm sensing, pressure sustaining valves designed for use with compressed air, water and other gases or liquids compatible with the construction. The valve main purpose is to maintain the upstream pressure under control in applications where small loads are involved. These valves are also specifically recommended to operate as pilot valves in combination with other pressure regulators.

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

The ADCA PRV47 pilot operated pressure reducing valves are designed for use with steam, compressed air, nitrogen and other gases compatible with the construction materials. The PRV47 can be installed in pressure reducing stations throughout all industries and provides sensitive and accurate control even when inlet pressure fluctuations or flow variations occur.

Tank blanketing valves are commonly used in tank storage systems to prevent and protect against explosions (avoiding flammable liquids being vented from a vessel), to control product contamination against external air that may fill the vapor space, to reduce evaporation losses (consequently, production losses), to reduce internal corrosion (caused by air and moisture) and to prevent vacuum condition. The blanketing process consists of covering the stored medium, usually a liquid, with a gas (normally N2).

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

RPZ backflow preventerdetail

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

The ADCA PS46 series pressure sustaining valves are single seated, diaphragm or piston sensing bellows sealed controllers, that operate without auxiliary energy. These valves are designed for use with steam, compressed air, and other gases compatible with the construction. These valves are particularly suitable for sustaining steam pressure in all energy and process systems where minimum upstream pressures must be kept under control.

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

The ADCA PS4 is a series of direct acting, spring-loaded diaphragm sensing, pressure sustaining valves designed for use with compressed air, water and other gases or liquids compatible with the construction. The valve main purpose is to maintain the upstream pressure under control in applications where small loads are involved. These valves are also specifically recommended to operate as pilot valves in combination with other pressure regulators.

The ADCA PS7 series direct-acting, spring-loaded diaphragm sensing pressure sustaining valves are designed for use with steam, compressed air and other gases compatible with the materials of construction. They are suitable for pressure sustaining applications where very small loads are involved. They are also specifically recommended to operate as pilot valves in combination with other pressure regulators.

The ADCA PRV25 is a series of direct acting pressure reducing valves designed for use on steam, compressed air, water and other gases and liquids. These regulators are suitable for reducing steam pressure at the point of use on laundry machines, dyeing, food industries, sterilizers, etc.

The ADCA PS30SS is a series of direct acting, spring-loaded diaphragm sensing pressure sustaining valves. These regulators are designed for use with compressed air, water, and other gases and liquids compatible with the construction materials and valve design. They are suitable for pressure sustaining applications at the point of use in laundry and dyeing machines, food industries, sterelizers, etc.

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

The ADCA P7 series direct-acting, spring-loaded diaphragm sensing pressure reducing valves, are designed for use with steam, compressed air and other gases compatible with the materials of construction. They are suitable for pressure reducing stations where very small loads are involved. They are also specifically recommended to operate as pilot valves in combination with other pressure regulators.

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

The ADCA RP45 series pressure reducing valves are single seated, bellows sealed controllers that operate without auxiliary energy. Designed for use with steam, compressed air, and other gases compatible with the construction. These valves are particularly suitable for reducing steam pressure in all energy and process systems where pressures must be kept under control.

RPZ backflow preventerinstallation

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

The ADCA P20P is a series of direct acting, spring loaded, piston sensing pressure reducing valves. These regulators are designed for use with nitrogen, compressed air, water and other gases and liquids compatible with the materials of construction. They are suitable for general purpose pressure reducing applications such as instrumentation systems and industrial equipment where small loads and high pressures are involved.

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

RPZ Backflow preventerdiagram

The ADCA PS47 pilot operated pressure sustaining valves are designed for use with steam, compressed air, nitrogen and other gases compatible with the construction materials. The PS47 accurately senses upstream pressure and acts to precisely control it to a minimum or disperse excess pressure.

The ADCA PRV57 pilot operated pressure reducing valves are designed for use with steam, compressed air, nitrogen and other gases compatible with the construction materials. The PRV57 can be installed in pressure reducing stations throughout all industries, and provide sensitive and accurate control even when inlet pressure fluctuations or relevant flow variations occur.

RPZ backflow preventerfor irrigation system

Tank blanketing valves are commonly used in tank storage systems to prevent and protect against explosions (avoiding flammable liquids being vented from a vessel), to control product contamination against external air that may fill the vapor space, to reduce evaporation losses (consequently, production losses), to reduce internal corrosion (caused by air and moisture) and to prevent vacuum condition. The blanketing process consists of covering the stored medium, usually a liquid, with a gas (normally N2).

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

rpz backflow preventer3/4

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

The ADCA PRV41SS is a series of direct acting, spring loaded, piston sensing pressure reducing valves. These regulators are designed for use with nitrogen, compressed air, water and other gases and liquids compatible with the materials of construction. They are suitable for general purpose pressure reducing applications such as instrumentation systems and industrial equipment where small loads and high pressures are involved.

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

RPZ backflow preventervs double-check valve

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

The ADCA PSW46B series pressure sustaining valves are single seated, diaphragm or piston sensing proportional controllers that operate without auxiliary energy. Designed for use with water, compressed air and other liquids and gases compatible with the construction.

RPZ backflow preventertest

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

The following navigation utilizes arrow, enter, escape, and space bar key commands. Left and right arrows move across top level links and expand / close menus in sub levels. Up and Down arrows will open main level menus and toggle through sub tier links. Enter and space open menus and escape closes them as well. Tab will move on to the next part of the site rather than go through menu items.

The ADCA PS47 pilot operated pressure sustaining valves are designed for use with steam, compressed air, nitrogen and other gases compatible with the construction materials. The PS47 accurately senses upstream pressure and acts to precisely control it to a minimum or disperse excess pressure.

The ADCA PRV41SS is a series of direct acting, spring loaded, piston sensing pressure reducing valves. These regulators are designed for use with nitrogen, compressed air, water and other gases and liquids compatible with the materials of construction. They are suitable for general purpose pressure reducing applications such as instrumentation systems and industrial equipment where small loads and high pressures are involved.

The ADCA PS31SS is a series of direct-acting, spring-loaded, piston sensing pressure sustaining valves. These regulators are designed for use with compressed air, water, and other gases and liquids compatible with the construction materials and vlve design. They are suitable for pressure sustaining applications at the point of use in laundry and dyeing machines, food industries, sterelizers, etc.

The ADCA POT is specially designed to protect the actuator’s diaphragms of RP45 pressure regulators when the media temperature exceeds their maximum operating temperatures.

The ADCA P20DS is a series of direct acting, spring loaded, diaphragm sensing balanced plug pressure reducing valves. These regulators are particularly suitable for general purpose applications where low flow and high temperatures are involved and have been especially designed for use with steam.

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

The ADCA RPW45B series pressure reducing valves are single seated, diaphragm sensing proportional controllers that operate without auxiliary energy. Designed for use with water, compressed air and other liquids and gases compatible with the construction.

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

The ADCA PRV31SS is a series of direct acting, spring-loaded, piston sensing and balanced plug pressure reducing valves. These regulators are designed for use with compressed air, water and other gases and liquids compatible with the construction materials and valve design. They are suitable for pressure reducing applications at the point of use in laundry and dyeing machines, food industries, sterilizers, etc.

The ADCA RP45 series pressure reducing valves are single seated, bellows sealed controllers that operate without auxiliary energy. Designed for use with steam, compressed air, and other gases compatible with the construction. These valves are particularly suitable for reducing steam pressure in all energy and process systems where pressures must be kept under control.

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

The ADCA RP45 series pressure reducing valves are single seated, bellows sealed controllers that operate without auxiliary energy. Designed for use with steam, compressed air, and other gases compatible with the construction. These valves are particularly suitable for reducing steam pressure in all energy and process systems where pressures must be kept under control.

The ADCA PRV30SS is a series of direct acting, spring-loaded, diaphragm sensing and balanced plug pressure reducing valves. These regulators are designed for use with compressed air, water and other gases and liquids compatible with the construction materials and valve design. They are suitable for pressure reducing applications at the point of use in laundry and dyeing machines, food industries, sterilizers, etc.

The ADCA P20D is a series of direct acting, spring-loaded, diaphragm sensing and balanced plug pressure reducing valves. These regulators are designed for use with compressed air, water and other gases and liquids compatible with the construction materials and valve design. They are suitable for pressure reducing applications at the point of use in laundry and dyeing machines, food industries, sterilizers, etc.

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.

Whether you have a question about products, pricing, customized equipment, or anything else, our team is ready to help you.