Description RV10-20X is a screw in, cartridge style, direct acting, poppet type, hydraulic relief valve intended for use as a pressure limiting device for common hydraulic circuit protection. It is intended for use in mineral based or synthetic (with lubricating properties) hydraulic fluids. Operation The RV10-20X blocks flow from port 1 to 2 until sufficient pressure is present at port 1 to force the poppet from its seat. The cartridge offers fast response to load changes in typical hydraulic circuits requiring low internal leakage. Notes Supersession: Existing and new applications. RVD58-20 Is our best-in-class relief valve and can functionally replace this valve in most applications. We strongly encourage you to consider this newer alternative. Considerations:. Smaller valve with comparable pressure and flow ratings Not a drop-in replacement Comparable response rate Better pressure rise characteristics Smaller size No dynamic seal Competitive cost Assistance is available to evaluate your application Application: GRV10-20 (corrosion resistant version) not recommended for crossover applications

WattsPremier Reverse Osmosis

Files:https://www.hydraforce.com/globalassets/product-stp-files/rv10-2xa__l.stp.ziphttps://www.hydraforce.com/globalassets/product-pdf-files/rv10-20_11apr2023_21-13.pdf

Premier Reverse Osmosisfilters

Ratings: Pressure Ratings Pressure rating: 228 bar (3300 psi) RV10-20X 228 bar (3300 psi) Grv10-20x port 1 34.5 bar (500 psi) Grv10-20x port 2 Proof pressure: 517.1 bar (7500 psi) Burst pressure: 1037.7 bar (15000 psi) Crack pressure defined: Pressure evident at 0.95 lpm (0.25 gpm) attained port 1 to port 2 Reseat pressure: Nominal 85% of crack pressure Relief pressure range: 6.9 to 206.8 bar (100 to 3000 psi) From zero to maximum control current Flow Ratings Flow rating: 38 lpm (10 gpm) At max pressure Maximum internal leakage: 5 drops/min To 85% of nominal setting Temperature Ratings Operating fluid temperature: -40 to 100 °C (-40 to 212 °F) With buna N seals -26 to 204 °C (-15 to 400 °F) With fluorocarbon seals -54 to 107 °C (-65 to 225 °F) With polyurethane seals Storage temperature: -40 to 70 °C (-40 to 160 °F) Ambient temperature: -40 to 70 °C (-40 to 160 °F) Other Ratings Corrosion protection: RV10-20X type III clear zinc plating per ASTM B633 Grv10-20x 960 hour salt spray per ASTM b117Operating Parameters: Fluids: Mineral based or synthetic with lubricating properties Fluid viscosity range: 7.4 to 420 cSt Maximum operating contamination level: 18/16/13 per ISO 4406Performance: Installation Specifications: Cavity: VC10-2 10-size-2-way Cavities Cartridge installation torque: 33.9 to 36.7 N-m (25 to 27 ft-lb) Maximum allowable torque: 67.7 N-m (50 ft-lb) H style plug torque: 33.9 N-m (25 ft-lb) Orientation restriction: NoneOrder Code: POSITION CODE DESCRIPTION RV10-20F-H-J-R/S F Adjustment Option F A 1/4" Hex Allen Head F B 1-1/2" Diameter Aluminum Knob with Aluminum Lock Knob F C 1/4" Hex Allen Head with Cover Cap F F Factory Preset Non-Adjustable F H Factory Preset Hidden Adjustment F L 1/4" Hex Allen Head with Cover Cap and Lockwire Holes H Line Body H 0 No Body H 6T Aluminum SAE 6 H 8T Aluminum SAE 8 H 6TD Ductile Iron SAE 6 H 8TD Ductile Iron SAE 8 H 2B Aluminum BSPP 1/4" (2) H 3B Aluminum BSPP 3/8" (3) H 4B Aluminum BSPP 1/2" (4) H 4BD Ductile Iron BSPP 1/2" (4) J Seal J N Buna-N J NC Buna-N for Crossover Applications J V Fluorocarbon J VC Fluorocarbon for Crossover Applications J P Polyurethane J PC Polyurethane for Crossover Applications J U PPDI Urethane R Spring R 06 3.4 to 41.4 bar (50 to 600 psi) Spring Range R 12 10.3 to 82.7 bar (150 to 1200 psi) Spring Range R 23 17.2 to 158.6 bar (250 to 2300 psi) Spring Range R 33 17.2 to 227.5 bar (250 to 3300 psi) Spring Range S Setting S MXXX Spring Setting in XXX bar S XX Spring Setting in XX psi (x 100)

premierro-pure plusmanual

Accessories: Seal kit: SK10-2X-B X=seal option SK10-2X-M X=seal option Seal kit installation instructions Housings: Available 10-2w valve bodies

Properties: Unit weight: 0.23 kg (0.51 lb) A 0.25 kg (0.56 lb) B 0.28 kg (0.61 lb) C/l 0.22 kg (0.49 lb) F/h Internal wetted surface area: 133 cm² (20.56 in²) A b c l 150 cm² (23.25 in²) F h