Watts1156Frepair

No adjustments required – cartridge tube has a partition moulded in place which determines amount of water discharged from the primer. Other brands have primers that require adjustments to deliver different discharge amounts

Watts B1156F

High pressure camp stove hose 1200 mm long which suits most early Primus stoves with 16 mm - 1mm thread on stove. Has a 3/8 left handed thread to suit ...

MIFAB model MRA-500-A Adjustable Trap Seal Primer, with 15 mm male BSP inlet and 15mm BSP female outlet. Complete with air gap with four viewing holes and removable filter screen.

Available in lockable cabinet (Model 38002 Steel Cabinet with slot lock; Model 38012 Stainless Steel Cabinet with key lock)

When the poppet rises off its seat, water flows from the primer, through the plumbing line connection and into the floor drain trap

A water hammer arrestor essentially creates air chambers. This space allows the pressure that's built up to release within the air chambers instead of the water ...

Watts 1 1/2" LF919-QT · Separate access covers for the check valves and relief valve for ease of maintenance · Top entry-all check internals easily accessible ...

MAG’s Electronic trap seal primers automatically maintain the water seal of floor drain traps and are available as a pre-assembled, programmed electronic system. Also available is our Hot Water Flushing System which automatically flushes hot water (or cold water) down waste pipes to prevent grease build up.

Product UPC, 09826884935. Product ID, 1290908. Manufacturer Name, WATTS REGULATOR CO./WATTS QUICK-CONNECT PLUMBING SOLUTIONS. Categorization, Repair Kits ...

2016221 — Make the system automatically program it self, and tweak it self over time using the indoor sensor. Everytime it falls short, bump the heatloss ...

A thermostatic mixing valve is a device which blends hot and cold water to provide your home with a reliable consistent hot water temperature at the hot water ...

Example application: when a men and women’s restroom are located side by side with a common pipe chase between them – so one trap seal primer with a distribution unit dialed to the 2 setting can service both floor drain traps.

Ideal for factories, industrial plants, food outlets, commercial businesses, schools, hospitals, manufacturing and any other buildings requiring floor drain trap seal protection

The MAG-MIFAB MI-DU Trap Seal Primer Distribution Unit can be installed underneath pressure drop activated trap seal primers to distribute water to up to ten floor drain traps that are near each other.

Available in lockable cabinet (Model: 38010 Steel Cabinet with slot lock; Model: 38011 Stainless Steel Cabinet with key lock)

rk-1156f

Pressure regulators reduce a supply (or inlet) pressure to a lower outlet pressure and work to maintain this outlet pressure despite fluctuations in the inlet ...

Activated with a pressure drop as little as 21 kPaNo air pre-charge requiredMinimum line pressure of 140kPA-max 560kPaFully Serviceable

Watts1156Fadjustment

Washing machine stop tap with combination non return valve prevents the back-flow of water from a washer or other appliances to the mains line.

Automatic Temperature and Pressure Relief Valve with Extension Probe and Lever | Features an All Brass Body with a Stainless Steel Pressure Spring

16 May 2024 — A water hammer arrestor provides an off-ramp for the water's momentum, like the emergency off-ramps on mountain highways.

This 1/2 inch high capacity feed water pressure regulator is for use in commercial and residential hydronic heating systems to fill the boiler and piping system with water, and to maintain water pressure in the system at all times. It also provides make-up water to the system in the event of system leaks. It consists of an iron and bronze body construction with NPT threaded inlet and outlet connections, a tight seating check valve, purge lever for manual purging, and a stainless steel strainer. It has high capacity performance and a simplified servicing design. It is suitable for use in the boiler feed lines of hydronic heating systems. The maximum pressure is 100 psi (6.9 bar).

The MIFAB TSP-2 Series Continuous flow primer discharges larger amounts of water when water pipes are larger and need a complete flow cycle through the pipes – a “continuous flow” instead of smaller drops of water.

Designed and engineered at MAG’s Australian factory with an approved vacuum breaker, 24 volt solenoid valve operated by a timer, adjustable flush times, shut off valve for maintenance and a manifold system to distribute water evenly to floor drain traps

Watts1156F rebuild kitLowe's

Discharges larger amounts of water – needed when water pipes are larger and need a “flow through” or “continuous flow” instead of smaller drops of water

Other brand has an air pre-charge that once lost, the product cannot be used.Fully serviceableReplaceable sediment filter and servicing