Yes, you do! In order to ensure the water temperature being produced from your outlets complies with Australia Standards (AS3500), you are required to have a tempering valve installed on any hot water system in Brisbane. The Standards state that, in order to avoid scalding, hot water must be set at a particular safe temperature and includes aspects such as:

A tempering valve is one of the best ways to ensure people are not harmed or scalded by hot water when it comes out of a faucet. It works as a mixing tool, as it combines both cold and hot water to correctly produce the required water temperature to be released from a particular outlet.

Both thermostatic mixing valves (TMVs) and tempering valves blend hot and cold water together to create a suitable water temperature, however, there are some important differences, including :

Yes, there is – the required tempering valve for your hot water system will depend on the type and size of your system. These include :

Hot water is a luxury that can very easily be taken for granted, so when it comes to hot water for your home or business, you want to ensure you have the best and safest system for your circumstances to avoid any unnecessary issues or problems. This may not mean just the system on its own though – this can mean any necessary additions, such as a tempering valve, to ensure the safety of yourself, your family and your friends. If your not sure if you have a tempering valve and need us to come and assist you can call now on 1300 054 488 or send an enquiry here. We are available 24/7 for hot water emergencies in the Greater Brisbane area.

2Double Check ValveBackflow Preventer

Apollo 4ALF-200-03 - 3", Stainless Steel, Backflow Preventer, Reduced Pressure Zone (RPZ) Assembly with OSY Gates, Lead Free

Additionally, tempering valves must be installed by a licenced plumber and are required to be installed in the following circumstances (according to the Plumbing Code of Australia):

Such a backflow assembly is suitable for various configurations. Normally, underground installation suggests straight, in-line installation, but in the case of above-ground installation, you can do it in a more compact form to save space. In most cases, it needs to be installed horizontally, but there are assemblies with an option to be set for vertical installation.

If you install a PVB outside, you need to protect it from freezing. To make it possible for you to make sure they work correctly, they are equipped with test cocks with specially-calibrated gauges.

One of the safest and most reliable backflow preventers on the market is a reduced pressure principle (RP) backflow assembly. It usually has an inlet shutoff valve, an outlet shutoff valve, four test valves, and a pressure differential release valve separating two independent spring-loaded check valves.

Apollo 4ALF-20G-03 - 10", FDA Epoxy Coated Ductile Iron, Backflow Preventer, Reduced Pressure Zone (RPZ) Assembly with OSY Gates, Lead Free

A check valve is fairly simple. It allows fluid to flow in one direction, and stops it from traveling back through the valve if the fluid reverses direction. A ball, or clapper, automatically moves to stop the flow when the pressure drops below cracking pressure (the amount of fluid pressure required to open the valve). This is a very reliable system for countless applications, but it can fail if something becomes lodged between the ball and the seal, and therefore, it is not suitable for multi-purpose pipelines, which include supplying fresh drinking water.

DEUTZ Water Pressure Reducing Valves N55B-M1.

To provide additional protection against water leakage, maintenance superintendants often invest in more advanced backflow valves, such as spill-resistant vacuum breakers (SVBs). They have a similar structure to PVBs, but they are additionally equipped with diaphragm seals to prevent water from spilling out of the air inlet when there's higher pressure inside.

Either an industrial or residential backflow preventer can provide your clients with numerous benefits. Here are some of the most important ones you can mention to them:

Realistically, this means that all hot water system replacements should be installed with a tempering valve, however, the requirements do not extend to some repairs – it is still highly recommended however that you arrange for the installation of a hot water tempering valve to ensure your safety.

Principally, both prevent fluid from traveling backwards in a line, but a check valve in itself is not an absolute, particularly in functions that demand backflow prevention, such as piping systems utilizing added chemicals, or are prone to frequent pressure loss, or absolutely must not fail.

In the case of this device, water pressure is not the most important for its functioning - it relies mostly on air pressure. It has an air inlet valve that stays closed when water flows in the right direction. If the water flow reverses, the air inlet valve opens so as not to allow for back-siphonage.

Because of the pressure-sensing diaphragm, this same scenario is repeated should something be lodged in the second check (the other check valve). Back siphonage is prevented in much the same way--fluid traveling in the wrong direction will not activate the diaphragm; the check valve remains closed.

Backflow prevention devices allow you to prevent the reversal of flow in plumbing systems. However, you can't test them post-installation because they don't have an inlet valve shutoff, outlet valve shutoff and test valves.

47942 - front bottom connection kit - for Masterpact NW2000..3200 - 3 poles - fixed.

2 backflow PreventerPVC

Apollo 4ALF-20E-03 - 8", Stainless Steel, Backflow Preventer, Reduced Pressure Zone (RPZ) Assembly with OSY Gates, Lead Free

The electronic hybrid mixing valve combines the typical function of the mechanical thermostatic mixing valve and the management efficiency of an electronic ...

A backflow preventer is advantageous if a foreign object lodges itself in the clapper (check valve), causing it to stick open. Here, the ordinary check valve will fail, allowing fluid to travel either direction through the valve, while a backflow preventer will trap and divert the fluid rather than allowing it to pass.

An atmospheric vacuum breaker (AVB), also referred to as an atmospheric antisiphon, is a commonly used backflow device. They come in various forms, including frostproof wall hydrant faucets and household hose bib vacuum breakers.

If you have any questions regarding tempering valves, their installation or how Fallon Solutions can help you with the process, give us a call on 1300 054 488 or book online today below.

Watts® LF009 Series, 1/2" Reduced Pressure Zone Backflow Preventer, Quarter Turn Shutoff Valves. $519.80 per EA. Add to saved list. Add to Compare.

Apollo 4ALF-20A-03 - 4", Stainless Steel, Backflow Preventer, Reduced Pressure Zone (RPZ) Assembly with OSY Gates, Lead Free

There are two main kinds of backflow preventers you can install to protect your clients from harmful damage, divided into several subtypes. They are as follows:

2 Backflow PreventerWatts

A backflow preventer is an essential component in pipelines involving cross-connections. While a check valve is commonly associated with preventing backflow, an actual backflow preventer performs a more specific duty and is a bit more complicated in design.

Apollo 4ALF-206-A2F - 1-1/4", Bronze, Backflow Preventer, Reduced Pressure Zone (RPZ) Assembly w/ Ball Valves, Lead Free

Likewise, fire systems rely on stored water that can become contaminated with bacteria. Preventing backflow and back-siphonage is therefore crucial for obvious safety reasons when the system is connected to a potable water line.

A backflow preventer, on the other hand, incorporates 2 (sometimes more) check valves, which are controlled by a pressure-sensing diaphragm, and a dead space where the fluid is trapped until pressure is equalized on both sides. This is a fail-safe measure designed specifically to divert fluid--through a relief valve--from traveling in either direction should a seal falter.

A backflow assembly has all the requisite valves and shutoffs for testing, and it is recommended to test it on a regular basis to make sure it functions properly. Some of the most popular backflow prevention assemblies are:

By submitting, you authorize Fallon Solutions to send text messages with offers & other information, possibly using automated technology, to the number you provided. Message/data rates apply. Consent is not a condition of purchase.

2IrrigationBackflow Preventer

Apollo 4ALF-10E-03 - 8", FDA Epoxy Coated Ductile Iron, Backflow Preventer, Double Check Valve Assembly w/ OSY Gates, Lead Free

Max Treatment Plant Classification ; Administrative Contact, 23944 CR 98. WOODLAND CA 95695, 530-668-0207, environmental.health@yolocounty.org ...

Apollo 4ALF-10G-03 - 10", FDA Epoxy Coated Ductile Iron, Backflow Preventer, Double Check Valve Assembly w/ OSY Gates, Lead Free

2rpzBackflow Preventer

One of the most appreciated backflow regulator manufacturers is Apollo. Check out some of the products we recommend to improve your plumbing services!

For potable water and plumbing applications that require meeting the Clean Water Act's restrictions and for use in other piping systems where backflow and back-siphonage must be eliminated, the 100 double check valve assembly and the top entry reduced pressure zone assembly 200 series are essential, as both are lead-free, and both are manufactured in the United States. (Replaces the original 4A Series, but parts are interchangeable).

The ValveMan.com valve store is proud to offer Apollo lead-free backflow preventers, as well as an extensive list of other great Apollo valves. In fact, all we sell are valves. It's what we do, and we do it better than anyone else. Check out our offer and contact us if you have any questions!

Pressure vacuum breakers (PVB) work in a similar way to AVB but with a significant difference - they have spring-loaded check valves, an outlet shutoff valve and test valves. As a result, they can be used for high-hazard purposes or where valves are downstream.

Apollo 4ALF-20C-03 - 6", Stainless Steel, Backflow Preventer, Reduced Pressure Zone (RPZ) Assembly with OSY Gates, Lead Free

1 1/2backflow preventerpvc

Apollo 4ALF-207-A2F - 1-1/2", Bronze, Backflow Preventer, Reduced Pressure Zone (RPZ) Assembly w/ Ball Valves, Lead Free

Addressing these issues is beyond the limits of a simple check valve, and necessitates the utilization of a backflow preventer. The Apollo Valve4ALF-100 and 200 Series offer top-of-the-line technology in backflow and back-siphonage protection.

In double-check valves, you can find four test valves, two spring-loaded and independently working check valves, as well as an outlet shutoff valve. Importantly, in order to be able to maintain the DCVA properly, you need to provide at least a foot of clearance.

Often, intricate and problematic piping systems involving cross-connections are code-required to utilize a fail-safe for eliminating back siphonage, which can result in contamination. This phenomenon can occur at these critical cross-connections--common in potable water pipelines servicing large office buildings or apartment complexes-- because they are tied into sewage disposal lines.

Also known as an RP (reduced pressure) or an RPZ (Reduced Pressure Zone) valve, a backflow prevention device is furthermore beneficial to irrigation systems, which are prone to problems--pressure drops--similar to drinking water systems. This can happen during a pressure loss, allowing chemicals to siphon back into the fresh water supply.

This is a pretty standard water pressure regulator that looks identical to the old one which was probably 20 years old (just a guess). It seems to be good ...

backflowpreventer中文

When a break in service occurs or during a fire hydrant flush (for simple examples), it causes significant pressure loss. Without backflow prevention, line pressure changes can lead to contaminated water back siphoning into drinking water feed lines.

202387 — A pressure reducing valve responds to changes in demand by either opening or closing the valve. When upstream pressure remains at or below set ...

Pesticides and fertilizers must not be allowed to contaminate watering systems, where they could be potentially harmful. Installed at cross-connections, a backflow preventer keeps the chemicals from the potable water supply.

21/2backflow preventer

Find RO replacement filters for your water system. Ensure quality and effective removal of water impurities by replacing your reverse osmosis replacement ...

Another common choice for backflow prevention is a double-check valve assembly (DCVA). It can be installed in both indoor and outdoor plumbing systems, either horizontally or vertically, and it is most often used for in-line or underground applications.

Backflow prevention is a crucial element in many piping systems, regardless of the fluids or materials they may be transporting. And, keeping up with today's potable water lead restrictions is another concern for piping systems that require a water backflow preventer. When you are buying these specialty valves, consider Apollo's 4ALF series first, and consider buying them from an industrial-grade valve supplier who has been in the business for over 50 years.

21 June 2022 — The gravitational flow form of the Hazen-Williams equation is calculated to provide water velocity and discharge rate that can be achieved ...

These pipeline assemblies typically involve potable water, where contamination from sewage, chemicals, etc. can spell disaster. Major applications will include plumbing and other waterworks, irrigation systems, and fire prevention systems. Check how backflow valves can improve your plumbing services and help your clients avoid contamination!

Pressure Regulators ; Neo-Pure Pressure Regulator 3/8" Tube OD-40 PSI · $10.68 ; Neo-Pure Pressure Regulator 1/4" Tube OD-60 PSI · $10.68.

Apollo 4ALF-209-03 - 2-1/2", Stainless Steel, Backflow Preventer, Reduced Pressure Zone (RPZ) Assembly with OSY Gates, Lead Free