2022223 — A hot water recirculating pump can be a convenient tool that may help you save water, lower your water bills, and, most importantly, provide you with hot water ...

For those seeking the highest level of water purification, you can opt for an additional reverse osmosis water filter to complement your home’s filtration system.

Water pressure regulators contain an internal diaphragm and spring that water must travel through before entering a home’s plumbing. The higher the water pressure that enters the regulator, the greater the pressure put on the spring. This causes less water to pass through the regulator, effectively reducing the water pressure as it enters the home’s pipes. The water pressure allowed into the home can be changed by adjusting the tension of a screw on the exterior of the regulator.

While water filters effectively remove a range of contaminants, they may not entirely eliminate certain substances depending on the type of filter. For instance, standard water filters may struggle to remove contaminants like viruses, certain types of bacteria, and specific heavy metals. They also may not effectively remove dissolved solids or substances like pharmaceuticals or hormones. This is why we recommend our Reverse Osmosis filtration system for those who are particularly concerned about the broadest range of contaminants.

At Complete Home Filtration, we understand that ensuring a clean, healthy water supply for your home and businesses is about more than just providing high-quality water filtration systems; it also involves a seamless, efficient installation process conducted by licensed plumbers.

They’ll demonstrate how to identify signs that your cartridges need changing and explain the filtration process, demystifying the science behind our innovative system.

Purification is significantly more thorough than filtration, but it is also typically slower, requires more power, and can only process small amounts of water at a time. Filtration provides a more passive, consistent rate of contaminant removal to significantly improve the quality of your water without forcing you to wait for a usable amount of water to be ready.

We believe our job is done only when the customer is happy – allowing you to enjoy ‘better water’ from every tap in your home.

If your water pressure is too high or low and you already have a PRV in place, you may simply need to adjust it to the correct pressure. To adjust your water pressure regulator, follow the steps below.

The Watts lead-free pressure regulators are excellent regulators for any home. They effectively protect your home’s plumbing from high incoming water pressure. They are constructed with a lead-free brass body and feature a reinforced diaphragm for protection against high temperatures. They come in both ¾” and 1”, giving you sizing options that will fit your home’s existing plumbing.

Water pressure regulators must be replaced about once every 4 to 12 years. While some PRVs may last longer than others, manufacturers recommend swapping out your regulator at least once every 5 years to prevent damage. Your home will show signs when your regulator may be failing. If you notice any of the symptoms listed below, you will want to inspect your pressure regulator and monitor it closely.

Better water using your whole home water filtration means just that – for your whole home. Rather than confining the benefits of better water to a single filtered tap, the Complete Home Filtration system is a comprehensive solution for ensuring that all the water in your home is purified and free from contaminants.

The presence of minerals in hard water can hinder the water heating process, causing your water heater to consume more energy as limescale builds up around heating elements. By filtering out these minerals, our system can improve the efficiency of your water heater, potentially lowering your energy bills.

2x For Mazda RX7 FD Premacy CP 323 BA BJ 626 GF GW Dynamic Led Fender Side Marker Indicators Turn Signal Repeaters B01W51120 · For Vehicle Brands/ModelMAZDA ...

Whether your water has particularly high sediment levels or you have specific preferences about chemicals like fluoride, your system will be configured to address your specific circumstances.

Our rainwater filter system is designed specifically for this purpose, providing an ideal solution for Australian conditions. The CHF-RWW disinfects water, removes sediments with a series of progressively more thorough filtration media, and utilises UV-C treatment to deal with microorganisms. It’s important to regularly test rainwater intended for drinking to ensure it meets safety standards. Always consult with a water treatment expert or local regulations when considering using rainwater as a primary drinking source.

While both water purifiers and water filters work to improve the quality of water, they do so in different ways and to different extents. A water filter is designed to remove impurities from water by means of a physical barrier, chemical process, or biological method. They typically target specific contaminants based on the filter type.

Our custom whole home water filtration systems are configured with four different stages of filtration, each targeting different impurities to provide clean and safe water for drinking, cooking, bathing, and other household uses.

Broadly speaking, we have systems that range from $1,400 to $6,825. The most affordable entry-level system involves installing a Reverse Osmosis filtration system for drinking water ONLY. For the fully installed whole-home systems, exact pricing is influenced by factors such as the size of your home and family, the hardness of your water, the types of treatment chemicals used in your area, and more.

When you require more than filtration for your drinking water, a reverse osmosis system is ideal. RO removes stubborn contaminants such as salts, fluorides, hormones and pharmaceuticals.

Yes! Similar to our Mains Water Systems, we optimise and personalise our filters to better suit your needs and your water tank. Our rainwater systems utilise the same high-quality sediment filtration that sets our industry-leading mains system apart, while also including ultraviolet disinfection to neutralise the bacteria that can contaminate water in the absence of treatment chemicals like chlorine.

Converting rainwater to safe drinking water involves several steps, including filtration and disinfection. First, it’s important to ensure that your rainwater collection system is clean and well-maintained. Next, the collected rainwater should go through a filtration process to remove any sediment and organic material before being more thoroughly treated or disinfected to neutralise contaminants like bacteria and parasites.

Designed in Australia for Australian conditions, the Complete Home Filtration system delivers filtered water for drinking, showering, and cooking while protecting a home’s pipes, fixtures, and water-using appliances from hard water damage. The CHF system is individually customised for each customer’s home and water, targeting specific concerns and adapting to different conditions across the country.

10 July 2015 — I mean, sure, I wish it wasn't like that but we all know how brutal business is and Cycling is – sadly and thankfully – a business. frank ...

Home water filter systems reduce the need for plastic bottles and heavy-duty cleaning chemicals. Help protect our planet and reduce your plastic footprint with a Complete Home water filtration system.

City water fluctuates in pressure depending on demand for water elsewhere. As a result, your home’s water pressure will be unstable if the regulator is not working. If you are unable to use multiple water outlets at the same time because of low water pressure, your PRV may be the culprit.

We use high-grade carbon and premium components for all our products, with all filtration media independently certified to guarantee that both our products and manufacturing procedures are of the highest quality and deliver optimum performance at all times.

As the RO system doesn’t need to balance the thoroughness of its filtration with maintaining water pressure (the whole-home system’s high-flow design reduces water pressure impacts to less than 5%), it is able to focus entirely on providing the purest water possible to a single tap.

We can say that the average home in Perth or Sydney changes their filters every 9 months. For homes with only 2 people or low water use, 12 months can be typical. We do not recommend leaving filters for more than 12 months without changing them.

This consultation involves a quick site visit from one of our friendly water technicians to carry out a water test, discuss and determine the type of filters you require for your family, and perform a site inspection to estimate the cost and placement of your installation.

Better Water you’ll love with support that lasts. We are here for you every step of the way from your in-home consultation through to installation and maintenance. A whole house water filter system from Complete Home Filtration provides your home with fresh filtered water year-round.

They are dedicated to ensuring that your whole home water filtration system is flawlessly integrated into your home’s main water pipe. This ensures that all raw tap water entering your home will pass through the multi-stage filtration process, thus guaranteeing clean, freshly filtered water at every water outlet in your home.

Complete Home Filtration’s whole home water filtration system is perfectly designed to handle the unique water needs of Australian households, eliminating the need for other water filters.

Whole home water filtration systems are beneficial for personal health and wellness, as well as for household appliances and areas with heavy water contact. Utilising a Complete Whole Home Water Filtration system can significantly extend the lifespan of these appliances and maintain the pristine condition of your home.

MM 22 OVAL DRIP CUP. Our oval-shaped drip cups are commonly used on work-tops of fume hoods. Injection moulded from polypropylene co-polymer resin. Supplied ...

Reverse Osmosis is not recommended for the whole home due to the water waste involved in ‘washing’ the water, but it is necessary for maximum contaminant removal from drinking water. If you have no concerns about fluoride in the water or other potential trace elements, then the level of filtration provided by the Complete system is sufficient. The Complete system filters down to 1 Micron and removes up to 98.5% of chlorine and other contaminants like pesticides, heavy metals, and chlorine by-products.

This consultation involves a quick site visit from one of our friendly water technicians to carry out a water test, discuss and determine the type of filters you require for your family, and conduct a site inspection to estimate the cost and placement of your installation.

Highly recommend Complete Home Filtration! We have had our home filtration system installed for over 6months now and no regrets at all. Fantastic service and an excellent product. Has been so good to not smell chlorine whenever we turn a tap on! Really appreciating that we can water our veggie gardens and fruit trees with filtered water this summer; as well as keep our family away from many toxins in the water we drink, cook with, bath/shower in, wash our clothes and dishes with etc. Definitely worth the investment – especially with young children and being pregnant with another little one!

If you have little to no water pressure in your home, your water pressure regulator may be the cause. If you have pressure with cold water and not with hot, then your water heater is most likely the cause, not the regulator. However, if both hot and cold yield the same low water pressure, you will need to replace your PRV.

A bad water pressure regulator can cause water to wreak havoc on your plumbing, so knowing the early signs of a bad regulator and taking preventative action before damage can be done are important in maintaining the health of your home. If you see any of the below symptoms in your home, your regulator may need to be replaced.

When a pressure regulator breaks, it is unable to lower water pressure as it enters the home. As a result, you may notice water pressure that is much stronger than normal. Before giving up on your current regulator, you can try to lower its pressure by adjusting its external screw. If this adjustment does not solve the problem, your PRV likely needs a replacement.

Protect your home with better water, which will help reduce calcium buildup on shower screens, fixtures, and appliances, saving you money in the long run.

If you need to order a new set of filters less than 8 months after your previous filter change, you can reach out to us by calling 1300 693 458, emailing filters@completehomefiltration.com.au, or sending us a message on Facebook or Instagram with your email and contact number so we can look you up in our database and send you a link to purchase a new set.

If you hear thumping or vibrating coming from your walls, your pipes may be experiencing high water pressure. Catching this before the pipes begin leaking is crucial in preventing water from damaging the interior of your home. However, loud pipes are not a clear-cut sign of a bad pressure regulator. Many factors, such as new appliances, solenoid valves, and a bad expansion tank, can contribute to noisy pipes. If your home’s pipes are making noise, listen for the noise next to your regulator. If the noise is noticeably louder, your PRV is most likely at fault.

Made in Australia, our UV-protective casing is designed for Australian conditions – keeping your system cool in summer and protected from harsh elements.

Building code requires homes that receive water with pressure greater than 80 PSI have a water pressure regulator. A home’s water pressure should stay in the range of 40 to 60 PSI. You can test your home water pressure easily with a pressure gauge with a garden hose adapter. If your home receives water from a city water system, your water pressure fluctuates throughout the day. Instances where there is sudden high demand for water, such as firefighting, cause water pressure to dip and rise in a water line. The use of a PRV can help steady these fluctuations.

We understand that people often are looking for a guide on price as part of their research before making a purchase decision or committing to organising a quote. Some approximate costs are:

However, any time from 6 months onwards, if you notice any change in the taste or smell of your water you may need to change the filter early. If in doubt, you can buy DPD tabs from Big W or any pool shop and test your water yourself to see if any chlorine is coming through. If you have a pool, you can use your existing pool test kit.

Due to the hi-flow design, this system delivers premium water pressure performance with no noticeable drop in pressure for homes with normal operating inflow pressure.

Our easy-to-use Filter Replacement Subscription makes it easier than ever to keep on top of your filter replacements – and saves you money in the process!

Our systems also incorporate a KDF 55 mixed media filter specifically for the removal of heavy metals, as these particles can sometimes remain intact after the previous filtration stages and are high on many consumers’ lists of priorities for contaminant removal. These 4-stages are crucial for enhancing the taste of drinking water and ensuring it is “the best” for your family’s daily use.

Usually configured for softening and filtration, the CHF-6000 can deliver clean water filtered to 1-Micron—which is 5x more thorough than our competitor all-home filters—to remove up to 98.5% of chlorine and its disinfection byproducts, along with heavy metals, pesticides, and a wide variety of organic compounds.

Areas with heavy water contact like bathrooms and kitchens can also benefit enormously from filtered water. Minerals and chlorine in unfiltered water can leave residue on surfaces, staining sinks, bathtubs, and kitchen fixtures, and causing unsightly spots on glass and ceramics. These cosmetic blemishes can lead to permanent damage if left untreated, etching glass and collecting bacteria in porous stone bench tops. Filtered water helps keep these surfaces clean and shining, reducing the effort and expense of constant deep cleaning.

Yes, some water filters do remove healthy minerals from drinking water, such as calcium, magnesium, mineral salts, and potassium. However, Complete Home Filtration’s water filters can be fitted with a remineralisation filter. This filter adds beneficial minerals back into your purified water after purification, improving its taste, enhancing its nutritional profile, and keeping your drinking water alkaline.

Complete Home Filtration systems are all WaterMark certified for your peace of mind, and our manufacturing facilities are ISO 9000 certified.

The Russian T-10 aka IS-10 Heavy Tank was the final of the IS series and aka The IS-8. It was pressed into service as a replacement to the other IS tanks.

Complete Home Filtration is Australia’s most-awarded whole-home water filtration company, bringing better water to thousands of families nationwide every day. It was founded to provide all Australians with a more affordable and sustainable way to access unlimited clean, filtered, delicious-tasting water from every tap in their homes with a comprehensive filtration solution.

At Complete Home Filtration, we understand that every home is unique. That’s why our whole-home water filtration systems are not just off-the-shelf products; they are 100% customised to the unique needs, characteristics, and challenges of your home and water.

The professional installation of your Complete Home Filtration system begins with our experts assessing your home’s water supply infrastructure. They will evaluate the conditions of your main water pipe to plan the most effective and efficient method for integrating our filtration system.

NOTE: The filter subscription model is paid in advance, not buy-now-pay-later. The cost of your next filter set must be paid in full before delivery, so existing customers must complete their current filter cycle and purchase a new set of filters upfront before beginning their filter subscription for subsequent cycles.

This additional measure significantly improves water quality by reducing a wide range of potentially harmful substances, ensuring your water is as pure as can be.

Reverse Osmosis (RO) filter changes are performed every 12 months as per industry practice for non-backwashing filters, and the membrane is checked every two years for performance during the scheduled service. Depending on water quality, membranes can last 2 to 4 years.

Replacing a water pressure regulator is a simple task. Regulators from the same manufacturer do not typically change in size over time, so purchasing the same brand as the old regulator should ensure a proper fit. You can replace your regulator with these simple steps:

General water pressure regulators start at around $60, while more expensive options can cost multiple hundreds of dollars. If you wish for a plumber to install your regulator for you, the installation will cost around $350. While this may seem expensive, the lack of a pressure regulator can cost you thousands of dollars in water damage if your home’s water pressure is too high.

On the other hand, a water purifier is a system that removes all types of contaminants, including bacteria and viruses that are usually smaller than what a filter can remove. These systems can include methods like distillation, deionisation, reverse osmosis, or ultraviolet radiation.

Our Complete Home Filtration water filtration system begins by removing larger particles such as dirt, rust, and sediment from the water. This initial step helps protect subsequent filters and improves overall water clarity.

Backflow occurs when water within a property is drawn back into the water mains, compromising the integrity of our reticulated water supply system.

If you are installing a regulator in a home that does not already have one, the steps for installation are more complicated. Unless you are experienced with plumbing, you will want to hire a professional. Installation often involves relocating the shut-off valve of the home to create space for the regulator. If you are comfortable enough to install the regulator yourself, follow these steps:

The main difference in terms of contaminant removal is the inclusion of fluoride, hormones, and pharmaceuticals. Many consumers are concerned about the removal of fluoride and other stubborn chemicals or contaminants, especially with the growing prevalence of recycled water. In this case, an additional RO unit that converts the Complete system to the Premium is recommended.

Our Reverse Osmosis (RO) filtration system is designed to remove the highest number of contaminants from your water. It is particularly effective in removing stubborn or dissolved contaminants that slip through conventional filters such as salts, fluoride, hormones, PFAS, and pharmaceuticals. For those who require a more rigorous filtration for their drinking water, this is the ideal solution.

Divide 5 by the number of minutes it took to fill the bucket, and you'll know the flow rate of the water in gallons per minute. The volume flow rate, also ...

Unfiltered water often contains minerals like calcium and magnesium that can build up over time and cause scaling in appliances like dishwashers, washing machines, and water heaters. This scaling can reduce the efficiency of these appliances and lead to costly repairs or replacements.

The softening resin also significantly reduces limescale and hard water damage by absorbing calcium and magnesium ions, protecting tapware, fixtures, shower screens, and water-using appliances from mineral deposits.

Once installed, all raw water entering your home will pass through our unique 4-stage filtration system to deliver clean, freshly filtered water to every tap and water outlet in your home.

The quality and characteristics of your home’s water can vary significantly depending on where it’s coming from, so it’s important to discuss your needs with an expert to make sure you’re getting a filtration solution properly tailored to your specific circumstances. Get in contact with our friendly team and find out which system is suitable for you!

Although many of our customers report a dramatic difference in their skin and the skin of their children, especially where underlying skin conditions may have been irritated by chlorine in water, we cannot make any health claims like this about our products.

Our customers have found that their skin and hair feel significantly softer and less dry when one of our filters removes chlorine from their shower water.

By integrating a Complete Home Filtration system into your home environment, you’re not only enhancing the health of your household but also ensuring the longevity and optimal performance of your appliances and maintaining the cleanliness and aesthetics of your home. It’s a comprehensive solution for better living.

Great service, great product – does everything they promised it would. Hassle free installation by professional tradies. No more bottled water, no more limescale, no more chemical smelling showers.

Our professional installation service aims to equip your home with Australia’s most-awarded whole home water filtration and purification system. It ensures that the process is smooth, the system works effectively, and you are confident in its operation.

SharkBite HG110-D thermostatic mixing valves (TMV) mix hot & cold water to deliver tempered water at a controlled and safe temperature. View now.

Up to a 7-year warranty (2-year manufacturer and between 4 to 7-year plumbing warranty depending on your State’s requirements)

Our system has a high flow capacity of up to 48 litres per minute and can be configured with a selection of filtration options to target specific water treatment needs depending on inflow water quality.

If your home has a water pressure regulator, it should be located near the main shut-off valve. The PRV should be located directly next to the valve. If you are unable to locate your valve, check your basement, garage, or downstream from your water meter if your home has one. If you live in a region with a cold climate, your valve will be located in a warm area to prevent freezing. Odd construction may cause the valve to be installed in an unusual place. If you cannot find the shut-off valve in any of these locations, your home inspection report will list its location. If your home receives water from the city lines, you most likely have a pressure regulator already installed.

Complete Home Filtration systems offer a versatile solution to water purification. They are professionally installed by our team of qualified plumbers at the point where water enters the house (whole-house filters), providing comprehensive filtration for all water used in the household.

Both methods have their strengths and uses. For the most comprehensive improvement to your home’s water, why not try a Premium system that offers both?

A new PFAS Filtration System is Coming soon to Complete Home Filtration! Please read on for further information about PFAS below and check back soon for full product info!

Appliances using filtered water tend to perform more efficiently. For example, washing machines and dishwashers run more smoothly, as filtered water is free from particles that may clog their systems. This not only boosts the appliance’s performance but also can lead to savings in terms of energy and maintenance costs.

Over time, the minerals in unfiltered water can clog or corrode pipes and fixtures, leading to plumbing issues and unexpected costs. Filtered, softened water helps maintain the integrity of your home’s plumbing system, extending its lifespan and saving you from potential repair or replacement costs.

Our installation team is composed of experienced plumbers, knowledgeable about both the intricacies of water supply systems and the technicalities of our water filtration solutions.

Leaky pipes are caused by high water pressure, but you may notice a leaky pipe before you see high water pressure coming from a fixture. High water pressure wears down pipes over time, eventually causing them to crack in some places. A leaky pipe can be a sign that your pressure regulator has failed to lower the pressure of incoming water. The first leak will likely form at the regulator itself, so checking for pooling water under your regulator can help you identify a problem early. If you notice a bad PRV too late, your home can experience costly water damage.

Our flagship model, the Complete Home System CHF-6000, is an all-in-one solution designed to handle the unique water needs of Australian households, eliminating the need for any other filters in the home.

With whole home water filtration, we recommend every 6 to 12 months, as filter exhaustion depends on a number of different factors. Because your water’s chlorine and chemical content can vary significantly over time, it is very hard to say exactly when your filters will need changing.

By investing in a Complete Home Filtration system, homeowners can enjoy peace of mind knowing that their water is purified and suitable for all household and family needs.

We had Craig come to our central coast home to explain the filtration system, it’s awesome, no more do we filter our drinking water through a stone filter system, my husband has had shocking dermatitis on his hands, that has now gone, we no longer use hair conditioner as skin and hair seem to be naturally nice.

By opting for an Annual or Monthly Subscription, you can spread out the filter replacement costs and avoid larger one-off payments. You’ll still have access to all the filter installation options, plus an exclusive discount just for our subscription members! Lock in your savings by switching to our subscription model for your next set of filters.

Best investment! I can’t recommend it enough. It makes a huge difference in all aspects. The water feels and tastes great. Thanks heaps to the whole team! Exceptional customer service from the very beginning. Staff are all well informed, professional, and friendly. Highly appreciate Daniel for going the extra mile.

The simple answer is that we will let you know. Once your unit is installed you will be added to our database. This activates your warranty and also places you in our reminder system for filter changes. We will contact you after roughly 8 months to remind you about your filters, depending on the filter replacement cycle you’ve been placed on (customised based on your system configuration and water quality/usage).

Without a PRV, a home’s pipes are subject to constant strain that deteriorate them over time. This can cause cracks to form in the pipes, eventually leading to water damage in the home. In homes with high water pressure, regulators are essential to keeping pipes and appliances running smoothly. Installing new plumbing or repiping your home costs thousands of dollars. It is also a very disruptive inconvenience, so addressing elevated water pressure before it damages your plumbing will ultimately save you money and hassle.

A water pressure regulator, also known as a pressure-reducing valve (PRV), is a valve that reduces water pressure as it passes into a home. When water enters a home through the main water line, its pressure is typically too high for the home’s plumbing to handle. Pipes and water-reliant appliances that experience high water pressure can deteriorate over time. A PRV protects a home’s water systems from damage caused by constant high water pressure.

Shop for Mueller Steam Specialty Y Strainer,27 5/8 H,0.062 Perf 4 758 N (1) at Ralphs. Find quality sporting goods products to add to your Shopping List or ...

Homeowners often notice low water pressure when it affects their household fixtures like weak showerheads and faucets, but high water pressure can often be overlooked. Not only is high water pressure less noticeable to the eye than low water pressure, but it is far more costly if it persists over time. A water pressure regulator is a device that prevents high water pressure from wreaking havoc on your home’s plumbing. With a working pressure regulator in place, you can have peace of mind knowing that your pipes and appliances are protected. In this article, you can find information on what pressure regulators are, how they work, how to install one, how much they cost, and which regulator is best for your home.

The combination of 5x finer filtration with less than 5% reduction in flow rate makes this system an industry-leading better water solution.

RO systems use a semi-permeable membrane to effectively remove dissolved solids, heavy metals, PFAS/POFA, and other unwanted chemicals and contaminants that may not be effectively captured by our whole-of-home filtration steps.

The causes of extreme skin conditions such as eczema and dermatitis are not fully understood in the medical community. Many believe them to be diet or digestion-related. However, many health professionals, especially in the natural health spheres, have stated that removing chlorine and chlorine by-products prior to bathing and showering is beneficial for those with sensitive or easily irritated skin – and even if you don’t the difference still feels great!

It’s also important to make sure your system is configured to the specific chemicals and contaminants in your area. For example, several regions in Australia use a chemical called chloramine as a primary disinfectant. Ordinary activated carbon filters are largely ineffective for removing chloramine, so customers in these regions will need filters configured with catalytic carbon.

Our whole home water filtration system absorbs and reduces these hard minerals, minimising the risk of scale build-up and contributing to the longevity of your appliances.

At Complete Home Filtration, we understand that every home is unique. That’s why our whole-home water filtration systems are not just off-the-shelf products; they are 100% customised to your specific needs, water issues, and home. There are multiple different sizes, types, and configurations of filters available, so prices will vary from one home to the next.

The water is then softened with a dedicated ion-exchange sodium resin, significantly reducing limescale and hard water damage, before passing through a high-grade, 1-micron carbon block to adsorb and reduce organic compounds, chlorine, and other chemicals that can affect the taste and odour of water.

14 Mar 2024 — TMVs eliminate this risk by ensuring a consistent, safe temperature at the point of use. ... Can I use a thermostatic mixing valve with my ...

In addition to implementing the system, our professionals will guide you through the functionality and proper maintenance of the water filters, providing you with the necessary knowledge to monitor their performance.

We strongly believe that having access to clean, healthy water is a crucial aspect of life. Whole home water filter systems enable you to enjoy the level of health you deserve.

Complete Home Filtration is an Australian-Owned, Trusted and Major Award Winning Whole Home Water Filtration Company – Protect your Family and Home with our Customisable Premium Products, Expert Installers, and Dedicated Aftercare.

I wish I have done this sooner installation didn’t take long and Craig was really friendly and educated both of us on what is in the water and how we can not only drink filtered water but shower and do laundry and what it does is just magic. Water tastes better and also my hair and skin I’m so happy that I got this installed for the house… best thing I have done in 2021, I would say. Recomend to get this done and call Craig .. he is the guy Trust me it is cheaper than buying bottles and the filter jug