Ideal for factories, industrial plants, food outlets, commercial businesses, schools, hospitals, manufacturing and any other buildings requiring floor drain trap seal protection

No adjustments required – cartridge tube has a partition moulded in place which determines amount of water discharged from the primer. Other brands have primers that require adjustments to deliver different discharge amounts

Discharges larger amounts of water – needed when water pipes are larger and need a “flow through” or “continuous flow” instead of smaller drops of water

MAG’s Electronic trap seal primers automatically maintain the water seal of floor drain traps and are available as a pre-assembled, programmed electronic system. Also available is our Hot Water Flushing System which automatically flushes hot water (or cold water) down waste pipes to prevent grease build up.

When the poppet rises off its seat, water flows from the primer, through the plumbing line connection and into the floor drain trap

Designed and engineered at MAG’s Australian factory with an approved vacuum breaker, 24 volt solenoid valve operated by a timer, adjustable flush times, shut off valve for maintenance and a manifold system to distribute water evenly to floor drain traps

WaterFilter

Other brand has an air pre-charge that once lost, the product cannot be used.Fully serviceableReplaceable sediment filter and servicing

Water purifierCostco

MIFAB model MRA-500-A Adjustable Trap Seal Primer, with 15 mm male BSP inlet and 15mm BSP female outlet. Complete with air gap with four viewing holes and removable filter screen.

Available in lockable cabinet (Model 38002 Steel Cabinet with slot lock; Model 38012 Stainless Steel Cabinet with key lock)

Example application: when a men and women’s restroom are located side by side with a common pipe chase between them – so one trap seal primer with a distribution unit dialed to the 2 setting can service both floor drain traps.

AquaGuard

Activated with a pressure drop as little as 21 kPaNo air pre-charge requiredMinimum line pressure of 140kPA-max 560kPaFully Serviceable

Available in lockable cabinet (Model: 38010 Steel Cabinet with slot lock; Model: 38011 Stainless Steel Cabinet with key lock)

The MIFAB TSP-2 Series Continuous flow primer discharges larger amounts of water when water pipes are larger and need a complete flow cycle through the pipes – a “continuous flow” instead of smaller drops of water.

The MAG-MIFAB MI-DU Trap Seal Primer Distribution Unit can be installed underneath pressure drop activated trap seal primers to distribute water to up to ten floor drain traps that are near each other.