A hot water recirculating pump, also known as a recirculation pump or water heater recirculating pump, is a device that instantly delivers heated water to your faucet, reducing the time you spend waiting. It plays a crucial role in recirculating systems, ensuring hot water availability on demand and reducing wastage.

Best hotwater recirculating pump

Once you've drawn up your plan, I recommend sharing it with the community. You can then ask any questions or concerns you might have about your plan.

Looking forward to seeing your home theatre come together. Please share regular updates as you progress and don't hesitate to ask for a hand whenever you need it.

I suggest having a quick look at this guide - How to build a low-level deck by @Adam_W. This guide should give you ideas on how to build a timber frame. I suggest drawing a plan on how you'll be building the frame of the riser. How large will the frame be? Is it just a single flat riser or will you be putting a second level to it? How tall does the riser need to be? Will you be putting carpet and heavy chairs on top of the riser? These are some of the questions you'll need to consider when drawing your plan.

Hotwater recirculating pumpinstallation diagram

One highly effective solution is to install a Corro-Protec anode, a type of powered anode rod. Unlike sacrificial anodes that deplete over time, Corro-Protec anodes provide a constant, low-level electrical current that protects your tank from corrosion for a longer duration. This not only improves the lifespan of your water heater but also eliminates the production of any unpleasant sulfuric odors. By combining regular maintenance and the implementation of effective anti-corrosion solutions like Corro-Protec anodes, you can further improve your water heating system’s efficiency and durability.

In addition to Eric's advice, you might also find the experiences shared by knowledgable community member @Prof in this article - How do you build a dedicated home theatre room?

Hotwater recirculating pumpwithout return line

The recirculating pump works by creating a loop between your water heater and the desired faucet, thereby continuously keeping hot water circulating in your hot water pipes. Any unused hot water is drawn back to the water heater through a return line, eliminating the frustrating delay of hot water arrival.

Whether it’s through a traditional water heater recirculating pump or more modern recirculating systems for tankless water heaters, this innovative solution has revolutionized home plumbing systems.

Installing a hot water recirculating pump can also lead to significant savings on your water bill. Although there’s an upfront installation cost, the long-term savings accrued from reduced hot water usage make the investment worthwhile.

Tanklesswater heater recirculating pump

Welcome to the Bunnings Workshop community. It's fantastic to have you join us, and thank you for sharing your question about building a platform riser.

There are several other aspects you can consider to enhance your water heating system. Regular water heater maintenance is paramount to keep it efficient and functioning at its optimum capacity. This involves draining the tank periodically to remove any sediment build-up which can reduce its effectiveness and energy efficiency. It’s also beneficial to inspect and replace the anode rod if necessary, as it plays a crucial role in preventing corrosion in your water heater tank.

One of my niece’s has three built in wardrobes that were built to suit suit her young family, now they are growing up, the robes need more longer hang ...

Every homeowner knows the inconvenience of waiting for hot water to arrive at their faucet, especially if the plumbing system is expansive, or the hot water pipes have just been updated. During this waiting period, not only is time wasted but a lot of water too. Enter the solution to this annoyance: the recirculating hot water pump.

Also what would be the best screws to use in this scenario for the overall screwing of all the timber together? I'm thinking of going with 75mm screws as per below link.

When the pump is activated by a temperature sensor or a timer, it pushes the hot water from the water heater into the hot water line and pulls in the cold water in the pipes, redirecting it back to the water heater via the return line. This way, it maintains a consistent temperature in your hot water pipes, ready to be used when needed.

How does a hotwater recirculating pumpwork

With a recirculating pump installed, waiting for hot water to reach your faucet becomes a thing of the past. Whether you’re running a bath, doing the dishes, or starting a load of laundry, you have hot water ready instantly. This convenience saves time and adds a layer of efficiency to your daily routines.

A hot water recirculating pump is a type of system that pumps hot water to faucets quickly. If you don’t have a hot water recirculating pump installed in your home, it may take a long time to get hot water to arrive at your faucet.

I am looking to build a home theatre room riser which is basically a rectangular platform made of 190x45 structural pine timber cuts as base structure with particleboard on top. I'm planning on using joint hangers for each joist.

Reducing the amount of water you use at home is not only better for the environment but also better for your pockets. Learn 10 ways […]

Our boys had outgrown their old rooms. We wanted to create a new fun room with their favourite characters. Both rooms were mirror imaged to one anoth ...

Recirculating pumpforwater heaterinstallation

When you want a warm bath or shower but only get cold water, it can be really annoying. If your hot water heater isn’t working, […]

Recirculating pumpforwater heaterdiagram

One of the primary advantages of having a hot water recirculating pump installed in your home is the significant water conservation it ensures. An average four-person family can waste up to 180 gallons of water per week while waiting for hot water. With a recirculating pump, this wastage can be drastically reduced, contributing to your home’s overall water conservation efforts.

Setting your water heater to an optimum temperature is key to getting hot water faster. If you run out of hot water during a shower, it signifies a different problem, and a hot water recirculation pump will not solve it. In such cases, a check on your water heater, or even a switch to tankless water heaters, may be necessary.

A hot water recirculating pump is an efficient way to provide instant hot water on demand, reducing water wastage and saving you time. So, next time you’re stuck waiting for your shower to heat up, remember that a solution like a recirculating pump can make your life easier and contribute to environmental conservation at the same time.

The delay in hot water arrival is due to the distance between your hot water heater and the faucet, and the diameter of your water pipes. If your heater is located far from the faucet, or the pipes are wide, the water has a longer distance to travel, leading to a longer wait time.

My issue is the 190x45 will be two layers high, so wondering what's and easy way to join these together for a noobie. I'm thinking of just using spare cuts of timber vertically with screws or using a galvanised steel join panel (rectangular with holes for screws).

Pros and cons of hotwater recirculating pump

Also, larger pipes can hold more water, meaning they have to move a lot of water before the hot water can reach your faucet. The flow rate remains consistent irrespective of the pipe size, which means larger pipes will require more time for hot water to arrive.

Hot water recirculating systems utilize a check valve to control the direction of water flow, ensuring the water only moves in the intended direction and prevents it from entering the cold water line.

Either way, the Corro-Protec technology will considerably reduce the limescale accumulation or deposits at the bottom of the tank which in turn will protect the heating elements. Plenty of hot water will come your way!