Dave.C was very friendly and professional especially for a Sunday. He was able to identify the cause of the leaky shower head, and provide two quotes. He was also able to show what the issue was and was able to advise what he had done to fix it. Thank you.

Correct installation keeps the valve set to the right pressure range for your home. This will effectively protect your pipes, hot water system and appliances from potential damage caused by high water pressure. A licensed plumber will also guarantee the installation meets Australian standards. That means you can have peace of mind your water pressure is regulated safely.

Next, release any remaining gas from the gas line. To do this, open the lid of your grill and turn all the burner knobs to their highest setting for 5 to 10 minutes. Once 5 to 10 minutes are up, turn all the burner knobs back to the off position.

Chromagen is an internationally recognised manufacturer of highly efficient hot water systems.  Metropolitan can service, replace or repair your Chromagen system.

A pressure limiting valve (PLV) is a vital device that protects your home’s plumbing system from excessive water pressure. It reduces the incoming water pressure to a safe level before it gets to your pipes, appliances and hot water system.

Stiebel Eltron was established in Germany, 1924. With over 95 years of experience in making hot water units, you can expect quality.

Please note: This information is provided for advice purposes only. Regulations differ from state to state, so please consult your local authorities or an industry professional before proceeding with any work. See our Terms & Conditions here.

Electrical, plumbing and air conditioning work is essential and we will be available to do the jobs you require in your home. Our friendly technicians are taking all precautionary measures and keeping to best hygiene practices.

Many homeowners simply don’t appreciate the extent of damage that high water pressure can cause to plumbing systems, hot water units and other appliances. Without regulation of the valves pressure, the strain can lead to costly repairs and shorten the life of your home’s vital systems. This is where pressure limiting valves become so important, so let’s take a closer look.

Ever had leaky pipes, noisy plumbing or frequent appliance breakdowns at home? Excessively high water pressure might be the (unwitting) mastermind behind it all, which is where pressure-limiting valves become a necessity.

Rheem has been going steady, hot and strong since 1939 with a comprehensive range of solar, heat pump and gas hot water solutions.

Installing a pressure limiting valve guarantees your property complies with Australian standards. It also keeps the maximum static pressure at a safe level and helps extend the life of your plumbing system by preventing pressure-related problems.

With the added bonus of meeting Australian standards, a pressure limiting valve will keep your water pressure within a safe range, reduce stress on your pipes and extend the life of your fixtures. Get your plumber to install a pressure limiting valve and have peace of mind for your home.

Thermann is one of the most efficient water heating systems around, with a range of options from solar boosted to heat pumps. We can install, service and repair your Thermann system.

If you have high water pressure in your home, a pressure limiting valve might be just what you need to protect your plumbing and appliances. Here are some common signs you may need one installed:

When water enters your property, the valve lowers the maximum static pressure so excessive force can’t cause leaks, bursts and wear on your plumbing. Typically installed near the water meter or main water supply line, the valve is adjustable so your plumber can set the pressure within a safe range for your home.

You want to prevent gas build-up and the risk of ignition, so the first thing to do is to turn every burner control knob to the off position. This includes all main burner, side burner, and rear burner knobs.Once the burner knobs are all safely off, turn the propane gas valve to the off position. This prevents damage to your regulator and releases pressure, minimizing the risk of gas leaks.

If your portable tabletop grill has problems and needs a new accessory to keep it working, our 1 lb Propane Tank Regulator is a must-have.Our High-Pressure Hose and Regulator are other essential accessories that keep your outdoor grill in optimal operating condition.

Wilson is an Australian owned and operated hot water system supplier with products to suit any need. Rest assured our technicians can install and service your Wilson hot water system.

There are many myths about pressure limiting valves that can confuse homeowners. Here are the facts to help you make informed decisions about your plumbing. Here are a few common myths:

If you’ve followed these steps successfully, your grill will have a healthy flame and heat up to grilling temperatures quickly – getting you back to grilling in no time!

I had a toilet that wouldn’t stop running, and it was wasting so much water. They arrived promptly, diagnosed the issue, and replaced the faulty parts. Now my toilet works perfectly. Great service and reasonable rates.

By installing a pressure limiting valve you reduce the risk of leaks, bursts and costly repairs. It keeps your water pressure within a safe range, extends the life of your hot water system, appliances and overall plumbing system. This simple addition will save you money and hassle down the track.

If you experience any of these issues, installing a PLV will prevent costly repairs and extend the life of your plumbing.

Now, grab the regulator coupling nut and reattach it to the propane tank by turning it clockwise. Then, slowly open the propane tank gas valve and continue to turn the valve counterclockwise until it can’t turn anymore.Pro Tip: Turn the gas valve slowly. Opening your tank’s gas valve too quickly can result in a rush of gas that can lock your regulator’s bypass valve. So, slow and steady is the way to go.

They replaced our old, malfunctioning toilet. The installation was quick, and they checked for any leaks thoroughly. Reliable service we can count on!

Is your grill having trouble heating above 250 degrees? Do the flames look low? Don’t worry—many have been in your place, and there’s a simple solution. It‘s time to reset your regulator. This is usually necessary when the bypass valve inside the regulator gets stuck, slowing or blocking the gas flow to the burners.In this Q&A, we’ll provide five simple steps to get your grill producing a healthy flame and heating up to the correct temperature quickly.

As we well know, pressure limiting valves protect hot water systems and other household appliances from the effects of high water pressure. Without effective regulation, excessive water pressure can put a strain on your hot water tank and cause it to wear out faster or fail. That pressure can also damage other common household appliances like dishwashers and washing machines.

Unfortunately, Saxon no longer produces heating units, but Metropolitan can still service, repair or replace your old Saxon system.

We believe in transparency. We will guide you through our process, answer your questions and provide you with an upfront, no obligation fixed prices.

Installing a pressure limiting valve is not a DIY job; you will need a licensed plumber. They will assess your plumbing system and determine the best location for the valve. More often than not, it’ll typically be near the water meter assemblies or main water supply line.

No matter how big or small your requirements are, Everhot has the right system. We at Metropolitan can help install or service your Everhot system.

A regulator for a gas grill is responsible for managing the gas flow from the propane tank to your grill. It decreases the high gas pressure from the propane cylinder to a significantly lower gas pressure required by the grill. Essentially, a propane regulator guarantees safe propane use by reducing the propane to a secure and usable pressure.

After turning the propane tank valve off, turn the regulator coupling nut counterclockwise to remove it from the tank. Then, set the regulator hose aside for later use.

Edwards is recognised for its superior performance and outstanding range of ground and roof mounted units offered in a range of colours.

If you don’t already, follow us on social media and fill us in on all your grilling adventures using #EveryonesInvited. We promise to keep you updated with all our latest grill tips, stories, recipes, and more—everything you need to stay satisfied between cookouts.

Installing a pressure limiting valve is a simple but important step in protecting your home from the effects of high water pressure. By regulating the incoming water pressure, these valves protect your plumbing systems and appliances from severe damage.

Rinnai is one of the biggest names in hot water systems. Metropolitan Plumbing has worked with Rinnai hot water systems for more than 25 years.

We know our job site is your home and we completely respect that. We arrive neat and clean, and tidy up after we've completed the job.

Dux is the big name in residential and commercial solar, heat pump and gas water heating. We can service and repair your Dux hot water system.

No matter how big or small the job is, whether you're a new or returning customer, we treat every job as important and strive for success.

Vulcan hot water systems are forged tough so that they can handle Australia's changeable climate without missing a beat.