PressureRelief Valve

The efficiency of the underfloor heating system itself plays a crucial role. The efficiency determines how effectively it converts electrical energy into heat. Modern systems with advanced controls and high efficiency like Coldbuster use less energy to achieve the desired warmth.The assumption in this running cost estimate model is that your heating system is running efficiently at all times.

The temperature set on the thermostat directly affects energy usage. Lowering the thermostat temperature by just a few degrees can significantly reduce running costs without compromising comfort. Programmable and smart thermostats can optimise heating schedules, reducing energy use during non-peak times and enhancing overall efficiency. Setting the thermostat to an optimal temperature (e.g., 20-22°C) during occupied times and lowering it (or even better turning it off) when not in use can significantly affect running costs.

Higher ceilings result in larger volumes of air to heat, which can increase energy consumption. Rooms with standard ceiling heights are more energy efficient.

When you buy a Coldbuster Radiant Floor Heating kit you get our complete support. You can ring us during office hours and we will answer any of your questions and help you install your radiant heater. You can also look at our Learning Centre for videos, brochures and guides. Don’t hesitate to call us if you need pre-sale assistance. No question is a stupid one so ask away!

Sizing tables provided by the manufacturers, give the tank model number and size based on the water heater's volume and the system supply pressure.

The assumption in this running cost estimate model is that your energy source is cost-effective and the electricity tariff is optimised for heating needs.

The assumption in this running cost estimate model is that your building has high-quality insulation materials installed in the walls, roof, and floor.

Watts 919QT. pecialWatts. Water ompany Backflow Preventer.com. For technical assistance, contact your local Watts ompon. Com representative on back page. Vate.

This vacuum breaker measures at 1-1/2" x 13-1/2" and is for closet flushometer applications. Includes the new style repair kit.

Draughts from poorly sealed windows and doors, as well as other gaps, can lead to heat loss and increased energy consumption. The type and quality of windows and doors significantly impact heat loss and gain. Double-glazing and well-sealed frames reduce draughts and improve thermal efficiency.The assumption in this running cost estimate model is that your windows, doors, and other potential gaps are well-sealed to prevent drafts and heat loss.

The ability to control heating in different zones or rooms independently allows for more precise energy use, heating only the areas that need it.

Coldbuster’s radiant floor heating systems keep heat in the right area – heating people in the room, not the ceiling. A heat that falls from ceiling-height is normally cold by the time it reaches the floor, a flaw in systems with less even heat distribution. Keeping your feet warm saves energy and provides the ultimate in comfort. Warm feet will spread that heat and good feeling to the whole body. You don’t get that stuffy head warmth and cold feet sensation with Coldbuster radiant floor heaters, as they evenly warm the area from the ground up.

Ames Fire & Waterworks 3/4" 2nd Check for Series Watts 2000B or Ames LF2000BM3 - 7016338. 0 Reviews. SKU #: AMES7016338; UPC #: 098268932737; MPN #: 7016338.

Product Type: Roof Drain. Optional Materials: Rough Bronze Dome -RBD, Stainless Steel Mesh Over Dome -SSM, Aluminum Dome -AD, Cast Iron Dome -CID, Galvanized ...

A radiant floor heating system is invisible, with no grills or panels. It is extremely safe as there is no exposed heat source to touch or get burnt from. The system evenly spreads heat across the floor area, and as it rises it provides an even, comfortable warmth to the room. Because of this, radiant floor heaters do not need to produce as much total heat to create the desired room temperature. There are also no dust or allergens blown around the room, as there are in forced air systems – particularly useful for allergy or asthma sufferers.

Different floor coverings have varying thermal properties. Materials like tile and stone conduct heat efficiently, while carpets and wood may require higher energy to achieve the same comfort level.The assumption in this running cost estimate model is that your flooring material is chosen with consideration of its thermal conductivity and compatibility with the heating system.

The design of the heating system, including the layout, spacing, and type of heating elements, affects heat distribution and overall efficiency. The size of the room in relation to the heater’s capacity is crucial. An appropriately sized heater ensures efficient heating without overworking the system.

The local climate influences heating needs. Colder outdoor temperatures increase the demand for indoor heating. Regions with milder winters require less heating and would therefore typically have lower running costs compared to areas with harsh winter and cold conditions.

Stormwater is rainwater that falls in urban areas and runs off hard surfaces like roofs, roads, car parks, paths and driveways into stormwater drains.

The assumption in this running cost estimate model is that your heating system is designed with zoning capabilities for customised temperature control.

The assumption in this running cost estimate model is that your building is relatively modern or has been updated to meet contemporary energy efficiency standards.

Watts PressureRelief Valve

The assumption in this running cost estimate model is that your ceiling heights are standard (2.4 to 2.7 meters) to maintain optimal energy efficiency and minimize excess energy use.

Shop our Asse 1024 Dual Check Valve collection. Zoro has low prices & fast shipping on millions of tools, parts and supplies for your business.

Consistent and predictable usage patterns help in planning and optimising energy consumption. Irregular or excessive use can lead to higher costs.

Temperature & pressurerelief valve

A duty cycle for electric underfloor heating represents the percentage of time the system is actively heating versus its total operational time. After the floor reaches its set temperature, the system cycles on and off to maintain it. The calculator factors this in and assumes a 50% duty cycle.

The type of floor substrate affects heat retention and energy efficiency. Concrete floors, for example, retain heat longer, while timber floors may require more energy to maintain warmth.The assumption is that your floor substrate is conducive to efficient heating, with thermal insulation boards used where necessary to enhance heat retention.

Electric radiant floor heating has many benefits when compared to forced air systems, convection radiators or reverse cycle air conditioning. The manner in which warm air circulates through a room determines how effective a specific heating system is. If all the heat is going to the ceiling then you are losing a lot of the effect of the heater, and require higher output temperatures to feel the effects. Obviously, this is not very energy efficient. With Coldbuster’s radiant floor heating systems you can achieve comfortable warmth as part of a cost-effective, energy efficient solution.

The efficiency and cost of the electricity used for heating directly impact running costs. More efficient energy sources and favourable electricity tariffs reduce overall expenses. Electricity prices vary by provider and plan. Choosing an energy-efficient tariff and monitoring peak and off-peak rates can help minimise heating costs.

WattsM1540XL

Hydronic radiant floor systems pump heated water from a boiler through tubing laid in a pattern underneath the floor. The temperature in each room is ...

wattsm151"

The total time the heating system is operational impacts energy consumption. Running the system only when necessary and using programmable thermostats to create heating schedules can optimise usage.The assumption in this running cost estimate model is that your heating is running only when necessary and optimised accordingly.

Watts 3/4Relief Valve

Our whole house water filter systems grant you absolute control by removing and reducing the most while retaining the best, giving you multiple lines of ...

Proper insulation reduces heat loss, making the heating system more efficient. Effective insulation in your floors, walls and roofs will help maintain the desired temperature with less energy consumption. Better insulation helps retain heat within the room, minimising the energy required to maintain comfort.

Please note that the factors and the assumptions that underpin this Running Cost Calculator mean that results should only be used as a rough guide, as conditions (some of which are listed below) can vary greatly.

The assumption in this running cost estimate model is based on average climatic conditions specific to the region in Australia where you are located and where the system is installed.

The overall energy efficiency of a building, including factors like construction quality, age, design and energy ratings, all affect its thermal efficiency and hence impacts heating costs. Older buildings may have more heat loss compared to newer, energy-efficient constructions.

A seat removal tool is needed to change the check seats. In 1989 all sizes except the 1 1/4" adopted a replaceable relief valve seat design as the standard. No ...

The assumption in this running cost estimate model is that you are using one of Coldbuster’s smart programmable thermostats to manage heating schedules effectively and that the settings are optimised for both comfort and efficiency.

The assumption in this running cost estimate model is that your heating system is designed and installed by experienced Coldbuster installation professionals or other suitably qualified professionals to ensure optimal performance and energy efficiency.