After reading this post, do some research and go hunting for your main shut off valves in your premises. This way you will know where to go if and when the time comes that water is sprouting from somewhere.

TestableDouble Check Valve

The first valve connects to the entire water plumbing system. Shutting off the meter will cut off the entire water supply to your home or business. To locate this valve  you can consider the following;

Leave the rest to the experts. Call a fully insured and licensed plumber, explain the situation and wait for them to offer any further instructions before their arrival.

Double check valvesymbol

Ask yourself, if your business premises or home has a major water leak suddenly, what would you do? We advise that you plan and prepare before such an event occurs.

If the hazard (substance you are protecting against) is considered a high hazard (i.e., a hazard that can cause health problems), the State requires that the device be tested twice a year. If the hazard is considered a low hazard (such as the hazard effects only the taste and odor of the water), the State requires testing once a year.

Once you know where you shut off valves are, you are likely to be calmer, determine any hazards and risks clearly and act accordingly and prevent any major damage to the premises.

Check valve

Double Check ValveBackflow Preventer

In the event you have an emergency issue including leaks or burst pipes, be sure to take the time to know where your main shut off valves are located.

For instance, sprinkler and irrigation systems are required to be protected by these devices. They are normally installed near the meter in an underground box.

For instance, sprinkler and irrigation systems are required to be protected by these devices. They are normally installed near the meter in an underground box.

Double check valveAir brakes

If the hazard is considered a low hazard (such as the hazard effects only the taste and odor of the water), the State requires testing once a year.

Double checkNon ReturnValve

We travel to and service all Sydney suburbs, providing prompt, reliable plumbing services to all of our loyal customers. Talk to the plumbing experts today about your enquiry, concern, problem, or for a quote.

A sprinkler and irrigation system that has a chemical feed requires this device. It is also commonly used in commercial establishments to protect against numerous contaminants. These devices must be installed above ground.

After locating and shutting off the main valves, the next stop should be the individual valves in the business or house. Take a tour of your appliances and fixtures to find their individual shut off valves.

The first thing that you should look for is the main shut-off valve. This is the valve that supplies the entire water system in your premises. In most cases, there are two main shut-offs. One connected with the building plumbing system and other one attached to the water meter. Locating each of the two requires different approaches.

The second valve is the one at your water meter If main shut-off valve within the house can’t be spotted, locating the main shut off valve with the meter should be as a last resort. This is located outside.