Having a snow-melting system in your home or workplace can literally make that happen. It can also keep you and other users of your property safe during winter (so you don’t end up on a YouTube fall compilation).

The FloorHeat Company will work with your HVAC contractor to help design a highly efficient air conditioning system to operate in conjunction with your EasyFloor system.  Typically, single story residences place the air conditioning air handler in the first floor attic or other suitable location and run flexible 6” ducts into the ceiling of each room – allowing the cool air to fall into the room.  For two story buildings, a high velocity air conditioning system that utilizes mini-ducts is an excellent choice.  FloorHeat can provide you information on both methods.

Unlike many conventional heating systems, radiant floor systems do not blow allergens into your home, nor do they require frequent maintenance and cleaning.

With this automatic activation and deactivation of the snowmelt system, it saves you the stress of monitoring the temperature and regulating it accordingly.

EasyFloor can be installed by do-it-yourselfers.  It is possible for a reasonably skilled person familiar with construction techniques to install EasyFloor and connect the floor to the EasyPanel™ primary control panels available from the FloorHeat Company.  However, we recommend utilizing a qualified professional to install the heat source to system controls to insure proper installation and operation of the entire heating system.

Snowmelting system

Watts BV-200 cast iron backwater valve with gasketed cover, bronze seat and flapper, and no hub connections...

The system is is easy to install, making it an ideal choice for either the Do-it-Yourself installer, or for professional contractors.

Elements within our home have been increasingly recognized as threats to respiratory health. Radiant heat does not use forced air or ductwork to spread allergens.

The FloorHeat Company provides the EasyFloor System to offer coherent, pre-engineered hydronic heating solutions to consumers, plumbing heating contractors, and builders.  The EasyFloor System is a collection of two products – our EasyFloor radiant floor and our custom-built EasyPanel distribution panels and manifolds.  While each product can be ordered separately, most customers prefer pre-designed and pre-tested solutions.  We don’t just supply ‘pieces and parts’, we provide in-floor hydronic radiant heat systems – at a price that is remarkably affordable.

We supply both hydronic and electric floor heating systems in a variety of sizes, making it easy for you to have your FloorHeat the way you want it.

Our Electric utilize flat ribbon alloy technology to create a sense of natural warmth. These mats can be used under a variety of floor types including stone, marble, tile, laminate flooring, and an endless possibility of other materials.

While it is highly unlikely that your EasyFloor will develop leaks when properly installed, the good news is that because of the modular construction of EasyFloor, it is possible to get access to the problem area.  There is a 25 year warranty for the recommended Kitec® PEX-AL-PEX tubing included in EasyFloor.  If the leak was caused by failure of the tubing, the warranty covers the cost of repair of the system and repair to the structure and replacement of damaged floor covering.  Importantly, proper installation of the heat tubing means that the installation of tubing is designed as one or more ‘loops’ – each ‘loop’ a continuous tubing run without splice or joints from the manifold and returning back to the manifold.

Snow meltsystem for roof

29 Sept 2023 — A significant revision is that these standards now also cover non-carbonated beverage dispensers, such as coffee makers and ice machines. This ...

Radiant floor heating is ideal for adding safe, low cost warmth to your kitchen, family room, basement, or virtually any other flooring area in your home. Gentle, even heat distribution warms your floor and adds comfort to the room. Because it is an electric floor heating system, there are no hot water pipes to worry about or thick electrical cables to bury in cement or the worry about raising your floor. Our radiant floor heating elements are revolutionary and have been the result of over a 30 year blend of unique radiant floor heating science and floor heating patented technology. If you can walk across it, you can affordably heat it!

Electricsnow meltsystem

EasyFloor is designed for a lifetime of care-free enjoyment.  The system is constructed from highest quality materials that should reasonably be expected to last for a very long time – aluminum reflective foil, modular plastic grid, galvanized steel heat reflector plate, and fiber cement thermal mass.  Of course, your heat source and control systems should be regularly inspected and maintained by heating professionals.

LF800M4QT-AUS. Anti-Siphon Pressure Vacuum Breakers, DN15-DN50 N9 Product Image. Watts. LFN9-AUS. Dual Check Vacuum Breakers for In-Line ...

Snowmeltingsystemsfor concrete slabs

If you are unsure of the right snow melt system for your needs, let’s talk. Speak with us and we will guide you through. Our team of professionals will help you select, install, and maintain the right snowmelt system for your needs in Missoula.

Incorporate practical comfort and elegance into your home. Flexible-film technology provides luxurious warmth under wood or laminate flooring. It is easy to install, energy efficient, and maintenance-free.

EasyFloor can be used in second and third floor installations without having to reinforce the floor joists. The weight is less than 5 pounds per square foot when using the backer board thermal mass.

It has a detector that reads the temperature and moisture. It also has a controller that controls all the components of the system. When it detects snow or ice, it warms up the place and melts them.

The EasyFloor system goes directly on top of an existing slab or subfloor.  When installing EasyFloor over suspended sub-floors, screw backer through the grids to sub-floor (2 ¼” galvanized deck screws or backer screws) being careful not the screw through the tubing!  Over concrete slabs, secure the EasyFloor and thermal mass to the slab with TapCons or ram sets.  In certain applications, plywood decking can be used in place of the backer board – consult with the FloorHeat Company.

Radiant heat systems traditionally come with a higher initial cost, but the efficiency benefits that the heat provides  may reduce your overall heating costs throughout the year.

A properly constructed radiant heating system utilizes a thermal mass to store and release energy into the room. generally, this mass is stone or a concrete type material that can retain radiant energy. Radiant systems without a thermal mass are inherently less efficient.

Using a snowmelt system is becoming more popular these days. It is now a convenient way to clear snow from your driveways, walkways, patios, parking lots, and emergency exits. With this, there’s no need for manual labor and back-breaking shoveling to clear the snow.

These issues arise not only because of the physical exertion that comes with shoveling. Being out in the cold temperature also contributes to this. It is a combination of the workload and the cold temperature that results in these hazards.

Snow meltmats

Our Film panels incorporate practical comfort and elegance into your home. Flexible-film technology provides luxurious warmth under wood or laminate flooring. It is easy to install, energy efficient, and maintenance-free.

EasyFloor radiant floor is designed to work with many different kinds of floor covering – but when selecting floor covering, be sure to mention to your floor covering supplier that you will be utilizing in-floor radiant heating.  Most floor covering products have published ‘R’ factors which will determine their suitability for use with EasyFloor.  Please keep the following points in mind:

2021628 — A water heater pressure relief valve, also referred to as a T&P valve, or water heater temperature valve is a safety feature that you can find ...

Radiant heating transfers radiant energy into a room, similar to the heat an active lightbulb provides around it. The sections of the EasyFloor System work together to release radiant energy to cooler objects in a room. The air itself is warmed as it comes into contact with the radiant floor and heated objects throughout the room.

The cost of getting and installing a snowmelt system differs. It would depend on the quality, the manufacturer, cost of materials, the source of heat, and the size of the surface.

Technical Specs ; SKU: 52334. Model: LF25AUB-Z3 3/4 ; seat material: engineered polymer (10% glass filled Noryl), nominal size: 3/4" ; pressure rating: 300 psi max ...

The type of snowmelt system you would need depends on the type of building. The electric snowmelt system requires little effort to maintain. It is easier to operate because it has few parts and there is no need for corrosive chemicals. Most times, people use the electric snowmelt system for residential buildings.

Expansion Control Valve (ECV). Often referred to as a cold water expansion valve, ECVs relieve excess water pressure produced by a water heaters heating cycle.

This system produces warm radiant heat by a series of pex tubing filled with hot water that travels safely under your floor. Ideal for entire homes, this system can be installed by the do-it-yourselfer or a professional.

Login with a social network ... There is no valid email address linked to your account entered. You will need to provide a valid email address to be able to ...

The EasyFloor System is designed to work with a variety of heat sources depending on fuel preference and availability, BTU requirements, local building code requirements, and personal preference.  Heat sources can include ‘upper end’ hot water heaters and boilers fired by natural gas, propane gas, electricity and wood in addition to geothermal and solar systems.

Heat is maintained near the floor and in the furniture you sit in, not wasted up at the ceiling level. With no ductwork, there are no drafts.

It can increase the value of your property. If you are putting up your property for sale, buyers would have to pay higher when they know the walkways and patios stay snow-free all year round. Also, you would have saved them the stress of selecting and installing the system themselves.

Give the gift of Reliable Radiant Heat!Order Our NEW 1-4 Zone distribution panel from our online store now through October 31, 2024 and receive FREE SHIPPING!

The hydronic type uses heat that is delivered in the form of fluids. It functions with hot water running through the tubes. The tubes run beneath areas where you don’t want snow or ice to accumulate. The hydronic snowmelt system is more ideal for buildings that serve industrial or commercial purposes.

Snow meltalcohol

It will also protect you from avoidable liabilities. People who visit your home or use your premises would not be prone to sustaining injuries.

It is also great for the environment. Because you wouldn’t need chemicals to clear snow from your walkways. When you use chemicals to clear snow, these chemicals would eventually find their way into the sewers and into the ecosystem.

A lot of people slip and fall during winter because of how slippery the walkways get. You can improve the safety of your premises when you have a snowmelt system installed.

These mats utilize flat ribbon alloy technology to create a sense of natural warmth. These mats can be used under a variety of floor types including stone, marble, tile, laminate flooring, and an endless possibility of other materials.

With the even distribution of hydronic radiant heat you can reduce your heating cost by up to 40% over conventional heating methods.

We offer a selection of Snow Melting systems that heat driveways and all concrete or pavement around your home, as well as roof and gutter de-icing solutions.

EasyFloor packages typically add only 1 ½ inches to your existing floor – 1” for the plastic grids and ½” for the thermal mass.  In new construction, this added height is usually accounted for by adding a second 2×4 to the bottom sill plate of walls.

The EasyFloor tubing base module (‘grids’) can be cut to fit with a hand or jig saw or table saw equipped with a fine tooth blade. The ¼” backer board can be scored and snapped with a utility knife and the ½” backer board cut with circular saw equipped with a fiber cement blade.

A snowmelt system comprises electric cables or tubes containing warm water. It runs under asphalt, concrete, and pavers to warm up the surface of your premises. It is this heat that melts snow and ice, effectively preventing them from building up on the surface.

And if there’s something we can both agree on right now: shoveling tons of snow is not a fun activity. What if this chore could just melt away?

Snow meltseltzer

Every year, thousands of people suffer from injuries traceable to shoveling snow. A study showed that head injuries, life-threatening heart conditions, back pains, and broken bones are common hazards people experience with shoveling snow.

The snowmelt system is one that helps you remove snow and ice from surfaces around your building. You wouldn’t need to remove snow from your sidewalks, patios, and driveways if you installed a snowmelt system. It uses tubes buried under the surface to heat and deice the surroundings to keep them free of ice and snow.

Description: The Brain® DMC80 DMC80 is a fully Digital Mixing Center (DMC) designed specifically to be the primary water temperature controller in a ...

EasyFloor is a unique method of constructing in-floor hydronic heat panels (radiant floors) that are designed to deliver radiant warmth to homes or buildings. The system is easy to install and provides impressive operating efficiency and even heat distribution throughout a room.

The LFMMV-M1 uses a double throttling design to control both the hot and cold water supply to the mixed outlet. The superior flow characteristics of this valve ...

Yes, in cases where construction indicates a poured concrete slab such as in a basement, the FloorHeat Company generally recommends that the PEX heat tubing be placed directly in the slab.  Operating in conjunction with the basement in-slab system, the EasyFloor can be used on sub-floors and slab surfaces not equipped with in-slab tubing.  Also, in cases where there is extreme heat load in a room, baseboard radiant heat or heat coils may be used along with EasyFloor.  However, many times EasyFloor is used on top of slab on grade floors because EasyFloor is significantly more responsive than tubes in overly-thick concrete.

Using a snowmelt system would prevent you from the hazards associated with shoveling snow and ice. You don’t have to strain your back, break bones, and expose yourself to extreme temperatures before you can get rid of snow on your surfaces.

Hydronicsnow meltsystem

FloorHeat’s EasyFloor Grid system is the most efficient radiant heat system on the market. The system is is easy to install, making it an ideal choice for either the Do-it-Yourself installer, or for professional contractors.

There is a sensor in both types that automatically activates when it senses that the temperature is dropping and freezing. It also deactivates itself when the temperature is higher than the freezing point.

This system produces warm radiant heat by a series of pex tubing filled with hot water that travels safely under your floor. Ideal for entire homes, thissystem can be installed by the do-it-yourselfer or a professional.

On average, the total cost would be between $4000 – $15000. Depending on your budget, you could have your home or workplace fortified for the snowy winter.

It’s that time of the year when your driveways and patios are covered with snow, making you slip (and possibly get caught on camera falling).

While you would spend money to install a snowmelt system, in the long run, it is more cost-effective. It saves you the cost of buying chemicals for clearing your surfaces and taking care of winter-related injuries.

The best way to install a snow melting system is when you are constructing the premises. However, you can install it on an already constructed walkway and other surfaces. Here, you would have to open up some parts of the surface to insert the cables or tubes in them.

Many people have the misconception that radiant floors must feel ‘hot’ in order to do an effective job in ‘heating’ a building.  Remember, however, radiant heat is not about heating the building but about ‘warming’ the objects in a building (the floor, the counter top, the kids, cat and carpet).  If the floor feels ‘hot’, it is too warm and will feel uncomfortable to the people in the building.  Ideally, the temperature of the floor in a properly managed radiant system is less than 80 degrees – a temperature that the human body senses is not too hot or too cold – just right.  So, when the thermostat calls for heat, the floor is brought up to around 80 degrees and radiant energy is released from the floor into the room.