Prv valvesbunnings

A pressure reduction valve can be a valuable addition to many piping systems. If the incoming water pressure is too high, this can put unnecessary strain on water heaters, pipe work, plumbing joints, taps and tap washers. It can increase the risk of burst hoses on washing machines, water leaks and possibly magnify any existing water hammer problems. The AVG pressure reduction valves (PRV) are factory set at 500 kPa. The downstream pressure is adjustable from 250 to 650 kPa. For pressure monitoring, there is a gauge port on the body of the valve so that a gauge can be fitted to monitor the upstream and downstream pressure. Sizes DN15, DN20 and DN25.

pressure reducing valve - bunnings

A pressure reduction valve can be a valuable addition to many piping systems. If the incoming water pressure is too high, this can put unnecessary strain on water heaters, pipe work, plumbing joints, taps and tap washers. It can increase the risk of burst hoses on washing machines, water leaks and possibly magnify any existing water hammer problems. The AVG pressure reduction valves (PRV) are factory set at 500 kPa. The downstream pressure is adjustable from 250 to 650 kPa. For pressure monitoring, there is a gauge port on the body of the valve so that a gauge can be fitted to monitor the upstream and downstream pressure. Sizes DN15, DN20 and DN25.

For product-specific approval information, please refer to the product’s specification sheet or contact us. For general information regarding any approval certification partners identified in the specification sheet, please visit our certification partners’ websites: