Lastly, plastic quick connect fittings are also great to use in hazardous locations. Since there’s no risk of flame or fire from a blowtorch, plastic quick connect fittings work well when there’s potential for fire or when insulation is present. The diffusion of low heat ensures a safe surface temperature.

First, plastic quick connect fittings are lightweight and easy to install. No crimp tools, adhesives or clamps are required. Plastic quick connect fittings are a quick and convenient assembly solution that saves both time and money. Simply push the tube into the fitting socket to complete the connection.

Pressure reducing valveadjustmentscrew

If it is not to your liking, you can go back and readjust. Try to keep your water pressure around the recommended level that is on the side of your water pressure valve.

We’re here for you no matter what you need regarding your home’s hot water! At Hot Water Solutions, hot water is all we do, and we’d be happy to help you readjust your water pressure or offer you any of our other helpful services.

Plastic quick connect fittings are also available with a polypropylene resin. Polypropylene may be required for special applications because it has excellent chemical resistance, cold endurance and has high tolerance to oxidizers.

Plastic quick connect fittings use high quality materials like white acetal copolymer with stainless steel gripper rings and NBR o-rings. The white acetal copolymer is durable and resistant to fatigue and creep, while the NBR o-rings provide an instant leak proof connection.

Water pressure regulatoradjustmentclockwise

The actual process of making a water pressure valve adjustment is very straightforward and really only involves you finding the right place to adjust, adjusting it correctly and then checking your water pressure.

If you are experiencing sudden water pressure problems, the answer to your issue may not be to perform a water pressure valve adjustment. Sudden problems with water pressure may be caused by things that don’t relate to your home’s water pressure valve.

SPARCO pressure reducing Valveadjustment

Plastic quick connect fittings are ideal for use in water systems, pneumatic systems, and food and beverage services. They work well for applications like point of use (POU) filtration systems, water dispensing systems, ice makers and refrigerators.

Once you’ve found it, check the recommended water pressure level, which is usually present on the side of the water pressure valve. Note this number down.

Second, plastic quick connect fittings should also not be used in applications where ambient temperature or fluid temperature may exceed 65°C or 150°F. This may damage the fitting and cause malfunction, leaks or failure.

Partially Closed Main Water Valve. The most common reason why people face sudden low water pressure is a partially closed main water valve. Make sure your valve is completely open to remedy this issue.

Wattsprv adjustment

What are plastic quick connect fittings? A plastic quick connect fitting is a durable fitting that is ideal for use in water applications. They are easy to install, removable and reusable.

How to adjust pressure reducing valve on boiler

Clogged Pipes. If only one of your faucets has low water pressure, your faucet or your pipes could be clogged. Take the right steps to remove the obstruction.

If you’re experiencing sudden water pressure problems that won’t be fixed by adjusting your pressure valve, you should contact a professional to help discover and fix the issue.

Step 4: Increase Or Decrease Your Water Pressure. Now’s the time for the actual adjustment to take place. Use your wrench to securely hold the adjustment bolt and twist it to change your water pressure.

People usually do this based on personal preference. Low water pressure can make it hard to use your water faucets the way you want, and a low-pressure shower may not be as comfortable for you when compared to a standard shower.

Step 2: Check Your Home’s Current Water Pressure. Before you make any adjustments, check your home’s current water pressure to see where you’re at. You can use a handy water pressure gauge to do so. If you don’t currently own a water pressure gauge, you can easily purchase one online or by visiting your local hardware store.

Pressure reducing valve location

We can speak with you to figure out what you need from us, what’s the issue in your home or to help you find amazing hot water products for your household. Need help with your home’s water heating system? Hot Water Solutions is the place to call!

Step 5: Check Your New Water Pressure. When you’ve made your adjustment, don’t tighten the locknut on your valve just yet – go and check your home’s water pressure again to see the new pressure levels.

Step 1: Find Your Water Pressure Valve. Locate the water pressure valve in your home. This is usually located in your basement or crawlspace, potentially near where your home’s water heater is.

Attach your water pressure gauge to a threaded faucet, like an outdoor faucet, and let the water run for 30 seconds. Note down your home’s current water pressure.

Step 3: Loosen The Locknut On Your Water Pressure Valve. Return to your water pressure valve. Loosen the locknut on the top of the device using a wrench to gain access to the adjusting bolt for your water pressure valve adjustment.

How to adjust a water pressure reducing valve

There are safety reasons as well. Water pressure that’s too high can be dangerous because extreme water pressure can lead to leaking pipes and even explosions.

Going clockwise will increase the pressure, and going counterclockwise will lower it. We recommend that you do this gradually and not go too far too fast.

First, plastic quick connect fittings are not recommended for use with liquids other than water, food and beverage products. They are also not recommended for use with strong acids or repeated exposure to strong oxidizers. We recommend you contact the manufacturer for the published chemical compatibility data sheet.

How to adjust water pressure regulator without gauge

Step 6: Tighten The Locknut On Your Water Pressure Valve. Are you satisfied with your water pressure valve adjustment? Good! Now you can go and tighten the locknut on your water pressure valve to return it to its original condition.

Step 7: Call A Professional If You Need To. Are you still unsatisfied with your home’s water pressure, even after adjusting it yourself? No worries, the road doesn’t end here – call a professional to come and help you out. They’ll certainly be able to resolve your water pressure issues.

Hopefully, you have learned something both interesting and useful about the applications, benefits and features of plastic quick connect fittings. Above all, plastic quick connect fittings are a durable, quick and convenient option that saves both time and money. Please feel free to refer to this blog post when working with plastic quick connect fittings.

Water Work Being Done. Your water pressure may lower if work is being done on the local water lines. If this is the case, resolving the problem is easy – just wait! Your water pressure should return to normal soon after the work is completed.

Plastic quick connect fittings are manufactured from safe, non-toxic and lead-free materials. They are manufactured with US FDA approved materials, and are also tested and certified in accordance with ANSI/NSF-51 and 61-G standards. They are available in sizes 1/4” and 3/8”.

Our expert team can speak to you over the phone or through our email or online web form. Please visit our site to get in touch, we’d love to chat! Call us today at 0800497658 to reach us or contact us through our website.

Old water pressure valves can become less effective over time. If yours is very old, you may want to have a plumber look at it to let you know what you should do.

Second, plastic quick connect fittings are removable and reusable. The unique oval shaped collet design provides an easy grip for assembling and dissembling without damaging the tubing or fittings. Plus, they do not require a special tool to disconnect. The tubing can be removed by disengaging the stainless steel gripper rings by compressing the oval shaped collet by hand.