Series LFN55B Water Pressure Reducing Valves are used in commercial and residential applications to reduce incoming water pressure.

Watts 3/4 In Bronze Dual Check Valve, Lead-Free Construction, Replaceable Seats and Discs, FNPT Inlet and Outlet Threads

La serie LF800M4QT evita el contrasifonaje del agua contaminada en un suministro de agua potable. El dispositivo es ideal para sistemas de riego, sistemas ...

20 Mar 2024 — Water pressure regulators can develop problems, causing water pressure in your plumbing system to fluctuate or go too high.

Pressure Reduction Valves are fitted in water systems to moderate and stabilise mains water pressure, which is at times too high for domestic appliances.

Zurn Z882 12″ wide pre-sloped trench drainage system. High density polyethylene structural composite drain channel with 1.04% (1/8″ per foot) bottom slope. All sections are modular 8-foot lengths with interlocking ends and radiused bottom. Complete with heavy-duty Dura-Coated steel frame w/ anchor studs at surface, combination anchor tabs/leveling devices at appropriate locations and extra heavy-duty iron grate-class C with lockdowns.

Our Channel and Trench Drain system is engineered to deliver the most flexibility in a medium duty design. The Polylok Heavy Duty Trench Drain is H-20 wheel load rated when cast in reinforced concrete. It offers a modular design with interlocking components to enable quick and easy connections. Each segment is 4 feet in length and comes with a reversible ADA compliant grate that can either be flat or allow for a 3/16″ convex surface.

Zurn Z880 2-1/2″ wide reveal trench drain system. Channels are 48″ long and 2-1/2″ wide. Channels are constructed of HDPE high density polyethylene, and are UV-10 stabilized. HDPE decorative grate provided.

Air separator tanks are used to remove entrained air within liquid systems, applicable to both open and closed loop heating systems.

Toilet anti sweat valve allows you to add hot water to your toilet supply to prevent toilet tank condensation. Made from corrosion resistant brass.

Trench Drain Z886 6″ wide pre-sloped trench drainage system. High density polyethylene structural composite drain channel with .75% bottom slope. All sections are 80-inch modular lengths with integral top frame, inter-locking ends and radiuses bottom. This Linear trench drain has combination tie-down/levelling devices at 20-inch intervals. Furnished with heavy-duty Dura-coated cast iron grate unless otherwise specified.

IMPORTANT - The following instructions must be read and understood prior to the commissioning the 15 mm and 22mm. VIP fail-safe thermostatic mixing valves. If ...

The name of this assembly is derived from a zone of reduced pressure needed for the operation of the relief or vent valve. This device is an assembly of two ...

Zurn Z884 4″ wide trench drainage system. Polypropylene structural composite drain channel with 3.0″ depth. All sections are 40″ modular lengths with integral top frame, interlocking ends, and radiused bottom. Furnished with heelproof polypropylene grate unless otherwise specified.

WATTS REGULATOR COMPANY #LFN45BM1-U ; SKU # 09826833240 ; Specifications. Type: Pressure Reducing Valve. Size: 3/4 in. MPT x 3/4 in. FTP. Material: Brass ...