Trust us to bring harmony back to your home’s water system. Ready for a water pressure solution that lasts? Contact CPI Plumbing & Heating at (360) 822-9306 – Your partner in home comfort and efficiency.

ValvCheq RP03 (RPZ) backflow valves play a critical role in maintaining the safety and integrity of your water supply.

Yes, adjusting the regeneration cycle of your water softener can impact water pressure. If the regeneration cycle is set too frequently, it may temporarily reduce water pressure during the cycle. Conversely, infrequent regeneration can lead to clogs in the resin bed, affecting water flow and pressure over time. It’s important to set the regeneration cycle according to your water usage and hardness level to ensure optimal performance of the softener without compromising on water pressure.

Similarly, if your well water is very high in iron, you will need to use an ion exchange water softener or iron filter to eliminate the metal from your water. Iron can cause the RO membrane to foul, impeding its ability to reject dissolved solids and diminishing the amount of pure water it can produce in a day.

Reverse osmosis systems employ carbon filters to eliminate chlorine from the water before it reaches the membrane. Thin film composite and thin film material (TFC and TFM) membranes are unable to tolerate any degree of chlorine, so carbon filtration is employed to protect the membrane from contact with chlorine. Carbon eliminates chlorine through a process called adsorption. Chlorine and organic compounds (like VOCs) adhere to the carbon’s expansive, porous surface area.

With our deep understanding of plumbing systems and customer-focused service, we’re here to troubleshoot, advise, and resolve any water pressure challenges you might face. We invite you to experience the CPI difference. Whether it’s fine-tuning your water softener, regular maintenance, or a comprehensive system overhaul, our experts are just a call away.

Sediment Build-Up: Sediment build-up in the brine tank or pipes connected to the water softener can obstruct water flow. This sediment can come from your water supply and accumulate over time.

The Watts Big-Bubba Depth Filter Cartridge melt blown polypropylene cartridges are recommended when depth filtration is necessary for gelatinous substances.

Understanding these potential causes can assist you in identifying the precise problem with your water softener. It’s a good idea to regularly maintain your water softening system and consult with professionals for periodic check-ups. Addressing these issues not only helps in resolving the water pressure problem but also extends the lifespan of your water softener, ensuring it works effectively for years to come.

Pure H2O purpose is to provide purified water solutions and quality service to our customers. Our state of the art technology provides satisfying water for ...

Backwash Frequency: The backwash cycle in water softeners, which cleans the resin bed, can sometimes affect water pressure, especially if the cycles are not functioning properly or are set too frequently.

The cost of whole house reverse osmosis also heavily depends on the size and output of the system. The greater the gallons per day produced by the system, the more expensive the initial cost will be. A higher output system demands a larger storage tank, which is another expense to factor in to the overall cost. Though you can install the system yourself, it is wise to consult a professional plumber or water treatment expert. Whole house RO is complex and it is vital that all the components are installed properly. Otherwise, you could see diminished household pressure and flow rates and risk reduced performance from your system. Whole house reverse osmosis is an expensive investment with ongoing costs and regular maintenance. However, in situations where it is the only option to purify your water, it can be a welcome relief from hazardous water quality.

Additionally, we address frequently asked questions, providing you with the knowledge and tools to ensure your water softening system works efficiently without compromising your home’s water pressure.

Mechanical Failures: Water softeners are complex systems with various components, like valves and controllers. Mechanical failures within these components can result in decreased water pressure. Regular wear and tear or a malfunction can impede the system’s ability to process water efficiently.

If you have very hard water, the water hardness minerals will wreak havoc on the membrane. Calcium and magnesium, the minerals that make water hard, are notorious for creating scale build-ups on appliances, water heaters, and inside of plumbing. These minerals will have a similar destructive impact on the RO membrane. The minerals will collect within the membrane, binding, hardening, and calcifying into a scaly blockage. This causes both the output of the membrane to decrease and the quality of the membrane’s output to decline. Ultimately, the membrane will fail. Membranes treating hard water will require frequent replacements, far sooner than the manufacturer’s recommendation. If you are going to install a whole-house RO system and you are on hard water, it is wise to install a water softener before the system. Water softeners will eliminate calcium and magnesium from the water, preserving your RO’s efficiency and the longevity of your membrane.

The maximum water pressure for most residential water softeners is usually around 120 psi, but it’s essential to check the manufacturer’s specifications for your specific model. Exceeding this limit can lead to damage or failure of the softener. Elevated water pressure can place undue strain on the internal components, potentially resulting in leaks or system ruptures. If your home water pressure exceeds the recommended limit for your softener, you may need to install a pressure regulator to protect the softener and other appliances in your home.

Reverse osmosis removes a host of contaminants, like chromium, uranium, copper, mercury, arsenic, boron, silver, lead, sodium, and nitrates. Many of these can pose health risks in elevated quantities, and there are limited filtration methods effective at eliminating these all at once. While an under-sink RO system is ideal for providing purified water at a single faucet, sometimes water presents challenges that can affect your whole home. If your water source is compromised by toxic levels of chemicals and metals, it can be wise to eliminate these from every faucet in your home. There are some cases where water you brush your teeth with, bathe your children in, and use to cook and clean should all be purified by reverse osmosis.

Also, consider that household water supplies will demand pressurized water. Not only are you running water to your tap and your refrigerator, but you’ll need enough water pressure to run baths and flush toilets. To achieve this, you will need to install a water booster pump as well. Grundfos pumps are high performance, energy-efficient pumps that can boost the water pressure of your water storage tank and are commonly used in both commercial and residential applications, like whole house reverse osmosis. When choosing a pump, consider how far the water needs to be transported from the tank. The further the water needs to travel, the greater the likelihood flow rates will decrease. For example, if you are running plumbing to an upstairs bathroom, you will need to choose a pump capable of generating enough pressure to keep the shower from running at a slow trickle. The booster pump will also need to be installed in-line with your plumbing, after the RO system and post-treatment and before the water enters your home.

2021323 — A tempering valve ensures that hot water flows from taps at a maximum temperature of 50°C. Thermostatic Mixing Valve. What is a TMV? A ...

A whole house reverse osmosis system requires significant planning, dedication, and maintenance for it to produce the desired results. A point-of-use RO system in your kitchen only needs a single connection to your plumbing, a dedicated air gap faucet, and one or two storage tanks. A whole house system requires much more consideration. You will need to factor in what pretreatment is necessary to protect the RO membrane, how many gallons per day your household will use, and the space required to house the system.

Since private wells are unregulated, it is incumbent upon the well owner to test their water and ensure their home’s drinking water is safe. If you are on a well, performing detailed water tests should be an annual part of your diligent well maintenance. Furthermore, if you are considering a whole house reverse osmosis system, it’s necessary to understand exactly what is present in your water so you can craft an effective strategy for achieving the high-purity water you desire. If you are on municipal water, you have the option of performing a lab test. However, cities are mandated by the EPA to release an annual water quality report. The Environmental Working Group (EWG) maintains an online database of these reports, which are searchable by zip code.

Inspecting for Leaks and Blockages: Check for any leaks in and around the water softener. Additionally, inspect the pipes leading to and from the unit for any apparent blockages.

Consult a Professional: If you’ve gone through these steps and are still unsure, or if you’ve identified the softener as the problem but are unsure how to fix it, it’s best to call in a professional. A plumber or water treatment expert can provide a more in-depth analysis and solution.

Most whole house reverse osmosis systems are also followed by a UV purification system. If you are on well water dire enough to require whole house reverse osmosis, it’s very likely there is potentially harmful bacteria or microorganisms present in your water supply. UV systems neutralize the DNA of pathogenic bacteria by dosing them with germicidal UV-C light. While reverse osmosis is adept at eliminating a host of dissolved contaminants, it should never be used for microbiological disinfection. Living organisms and viruses should always be removed by UV. Furthermore, there is always the possibility for bacteria to grow within the membrane or in the storage tank. Living organisms and viruses should always be removed by UV. This is why ultraviolet purification is always recommended as the final stage in a whole house filtration system.

Low water pressure will result in reduced production and premature fouling of the membrane. The ideal pressure for operating an RO system is 60 PSI. Pressure ...

Once you’ve conducted the initial checks and suspect that your water softener might be impacting your home’s water pressure, it’s important to understand why this could be happening. Here are some key reasons that explain how a water softener could potentially be the cause of reduced water pressure:

If you’ve pinpointed your water softener as the cause of low water pressure in your home, there are several DIY steps you can take to address the issue. However, remember that while these tips can be helpful, seeking professional assistance is often the best approach to ensure the problem is resolved correctly and safely.

Signs that your water softener is clogged include a noticeable decrease in water pressure, changes in water quality (like hardness), or the system regenerating more frequently than normal. To check for clogs, inspect the resin bed for any buildup of minerals or debris. Additionally, look for salt bridges in the brine tank, which can block the flow of water and salt. Checking and cleaning any filters or screens for blockages can also indicate if your water softener is clogged.

Check Other Water Sources: First, test other faucets in your home. When the low pressure is confined to a specific area, it may not necessarily be attributed to the water softener as the underlying cause. If the problem is widespread, then proceed to the next step.

As we wrap up our exploration into the intricate relationship between water softeners and home water pressure, it’s clear that vigilance and understanding are key. Addressing water pressure issues can seem daunting, but with the right approach and expertise, it’s a manageable task. This is where CPI Plumbing & Heating steps in. Our dedicated team of professionals is committed to ensuring that your water softening system enhances your home’s water flow rather than hinders it.

Water is a vital resource in our daily lives, but sometimes, the systems we use to improve its quality can create unexpected challenges. One such example is the impact of water softeners on home water pressure. In this guide, we delve into the intricacies of how water softeners might affect your home’s water pressure.

Evaluate the Age and Maintenance History: Consider the age of your water softener and how regularly it’s been serviced. Older units or those that have received insufficient maintenance are more prone to causing problems.

Reverse osmosis produces water of remarkable purity by separating chemicals, pesticides, pharmaceuticals, and dissolved solids from the water. While rarely used as a whole house water filtration system, some groundwater is so severely contaminated reverse osmosis is the only viable option for providing the home with clean water. A whole house reverse osmosis system requires careful planning, diligent maintenance, and a researched understanding of your water’s chemistry. Whole house reverse osmosis systems can be complex endeavors, but they can also restore water quality to homes affected by astronomical levels of TDS or dangerous quantities of contaminants like hexavalent chromium.

Look for Blockages: Resin beads from the softener can sometimes get lodged in the lines, causing blockages and reducing pressure. Inspect any accessible filters or screens for signs of resin bead accumulation.

Encountering low water pressure can be quite bothersome, so it’s crucial to determine whether your water softener is the root cause of this issue. Here’s a step-by-step guide to help you determine this:

Incorrect Sizing: If your water softener is not adequately sized for your household’s water usage, it can struggle to keep up, resulting in lowered water pressure. It’s crucial to have a unit that matches your home’s water demand.

If after trying these steps you still experience low water pressure, or if you are not comfortable performing these tasks yourself, it is highly recommended to call in a professional. A skilled technician can provide a more thorough inspection, identify the root cause, and perform the necessary repairs or adjustments.

This recirculating pump eliminates water waste caused by waiting for water to heat up. The device uses the pump at the water heater and a patented under-sink ...

A whole house reverse osmosis system will cost around $12,000 to $20,000. While the price of a commercial-grade reverse osmosis system is around $3,000-$5,000, the pretreatment of the water, the pressure booster pumps, and the installation will all increase the cost. The RO’s filters and membranes require regular replacements, as will the components of your other filtration systems. Water softeners require resin beads and periodic replenishment of salt in the brine tank. UV lamps need to be changed every year, and the quartz sleeves every two years. Carbon and sediment filters usually need to be changed every six months, and your acid neutralizer will dissolve its calcite media over time.

Use the Bypass Valve: Find the bypass valve on your water softener, typically identified as a lever or knob on the unit. Move it into bypass mode, enabling water to circulate throughout your home without traversing the softener. After doing this, check your water pressure. If there’s an improvement, your water softener is likely the cause.

Reverse osmosis systems generate wastewater as a byproduct of their water purification systems. Design and technological innovations continue to find ways to eliminate the inefficiency of reverse osmosis, but there is no way to create RO water without wasting water. The purified water (called permeate) is physically separated from the solution brimming with contaminants (called the brine) by the membrane. The brine is then flushed out of the system and down a dedicated drain. Larger, commercial systems have become especially adept at lowering the rate of rejected water, but these systems are also handling much greater volumes of water. To use the example from before, say you had a 1,000 GPD whole house RO system and a 250 gallon tank operating at 1:1 efficiency (for every gallon of permeate produced, only one gallon of brine was sent to the drain.) It would require 500 gallons of water to fill that tank to the top with purified RO water.

Professional servicing ensures that your water softener not only runs efficiently but also helps in preventing future issues. Remember, regular maintenance by a professional can extend the life of your water softener and keep it functioning at its best.

The ideal pressure for a water softener typically ranges between 40 and 70 psi (pounds per square inch). This range ensures efficient operation without risking damage to the system. Operating at a pressure that’s too low may not allow for proper water flow through the softener, impacting its ability to effectively soften water. On the other hand, too high pressure can strain the system, potentially causing leaks or damage. It is essential to refer to your water softener’s manual for precise instructions and utilize a pressure gauge to conduct regular pressure checks.

A whole house reverse osmosis system is a water filtration system that filters the entirety of your home’s water through a reverse osmosis membrane. A whole house reverse osmosis system is installed at the point where water enters your home. Every drop of water entering your household plumbing is treated by the reverse osmosis membrane, from your drinking water at your kitchen sink to the water you use to shave, shower, and flush your toilets. Whole house reverse osmosis (RO) systems ensure that your entire home is free from any traces of water hardness, salts, chemicals, and TDS. The microscopic pores on the semipermeable membrane of the RO system can eliminate over 98% of dissolved organic and inorganic matter. The water produced by reverse osmosis is almost unparalleled in its purity, and it is a more cost-effective method of purification compared to deionization or distillation. While reverse osmosis is commonly used for residential point-of-use drinking water, those with extremely challenging water conditions install a whole house RO system to provide them exceptional water quality throughout their home.

Salt Bridge Removal: In case a salt bridge forms within the brine tank, take care to gently break it apart. Use a long-handled tool to gently push down on the crust to break it apart, but be cautious not to damage the tank.

Navigate to previous page; Page 1 of 3; Navigate to next page · Advanced Search · Price Range · Login to add product to wish list Wish List · Login to add ...

Your water needs to be pretreated to protect the RO’s membrane and promote peak efficiency of your system. However, the water also needs to be treated after exiting the tank and before entering your house. Most whole house RO systems will be followed by a pH adjuster (also known as an acid neutralizer). RO water is mildly acidic, usually falling between 5-6 pH. Acidic water is corrosive, eroding copper plumbing and causing pinhole leaks to sprout. Many under-sink reverse osmosis systems include a remineralizer cartridge to add mineral content back into the water and buffer the pH. However, a whole house RO system is processing a much greater volume of water. A small inline cartridge would not bear much influence on the water’s pH and would significantly reduce water pressure. Passing through water through calcite, a calcium-rich crushed marble media high in alkalinity, will boost the water’s pH and protect your plumbing from damage.

Check for Leaks: Inspect the vicinity of the water softener for any indications of leaks. A leak within the system can lead to reduced water pressure and must be dealt with promptly.

Inspect for Salt Bridges: Sometimes, a crusty build-up known as a salt bridge forms in the brine tank of the softener, which can hinder its performance. Carefully check for any hard crust on the top layer of the salt. If present, gently break it up.

To boost water pressure following the installation of a water softener, it’s crucial to verify that the unit is appropriately sized to accommodate your household’s water consumption. If the size is adequate, check for any salt bridges in the brine tank or clogs in the resin bed, as these can restrict water flow. Adjusting the regeneration cycle frequency may also help. If these steps don’t improve pressure, inspect for any kinks or blockages in the pipes leading to and from the softener. If the problem persists, it’s advisable to seek the expertise of a professional, as it may be necessary to reevaluate the installation itself.

The only way to truly know if your water needs to be treated by whole house reverse osmosis is to perform a detailed water test. Many contaminants that pose the biggest threat to your health and your home are tasteless, odorless, and colorless. Your well water may be discolored, taste like metal, and bear a harsh odor, but many of these problems are solvable by much simpler filtration systems. A rigorous water test kit will reveal your water’s organic, chemical, and metallic composition, identifying the levels of everything from pesticides and ammonia to arsenic and cyanide. Without a thorough understanding of what is in your water, it is impossible to know how to best go about eliminating the contaminants. A water test will help illuminate what pretreatment your water needs to undergo before it reaches the reverse osmosis system. Without a water test, you will also be unable to gauge the success of your whole house reverse osmosis system.

Almost all RO systems require both sediment and carbon prefilters. Sediment filters act as a mechanical screen, sieving grit, sand, and debris out of the water. The membrane is capable of eliminating sediment on its own, but large quantities of sediment would quickly clog the membrane. More importantly, though the membrane is capable of rejecting any particulate matter in your water, all the wastewater generated by the reverse osmosis unit drains through a tiny flow restrictor. This flow restrictor would quickly become clogged if dirt and debris were flushed through it along with the rejected dissolved inorganic contaminants. Since the flow restrictor pressurizes the reverse osmosis membrane as well as balances the recovery ratio of the system, it is important to keep it clear and free from sediment.

If the water test reveals your well has concentrations of nitrates, nitrites, arsenic, chromium, or TDS far above what the EPA has established as safe, you then need to contact a water specialist. While an under-sink reverse osmosis system can be used to restore your drinking water’s taste and safety, there are some applications where you will need a system to service the entirety of your home.

Yes, a water softener can reduce your water pressure and flow rate. This typically happens when the softener is incorrectly sized for your home, the resin bed becomes clogged, or if there are mechanical issues within the softener. When the softener cannot process water efficiently due to these issues, it leads to a decrease in the rate at which water flows through your pipes, subsequently reducing the water pressure.

Perhaps the most important thing when selecting a whole-house RO system is making sure you find one that can support your daily water usage. Generally speaking, each member of the household will use between 60-75 gallons of water per day. However, this number varies. A household with young children will tend to use more water, while a home with working adults may use less. Regardless, you need to make sure you select a system with an output high enough to support each individual’s water use and choose a tank that can store enough water to service every member of the family throughout the day.

Checking and Cleaning Filters: Inspect and clean any pre-filters or screens. This is a relatively straightforward process: turn off the water supply, remove the filters, and rinse them under running water to remove debris.

Since it’s necessary to install a reverse osmosis system indoors and in a room where temperatures won’t cause the water or equipment to freeze, you may need to renovate your basement or a spare room of the house to comfortably hold all of this equipment. You also want to make sure you have plenty of space for filter changes, system maintenance, and installation. You don’t want to climb through a jungle gym of plumbing and filtration equipment to refill the resin in your softener or flush out your spin-down sediment filter. You also need to choose a room in your home where you can easily plumb your water main from your well. Since reverse osmosis systems do drain wastewater (as do water softeners), you’ll also want to select a location where the systems can drain without risking backflow.

If you suspect your water softener is affecting water pressure, begin by testing other water outlets in your home to see if the issue is isolated or widespread. Next, engage the bypass valve on your water softener to direct water away from it. After doing this, observe if there’s an improvement in water pressure. This helps identify if the problem is with the softener or elsewhere. Additionally, inspect for salt bridges in the brine tank and check the resin bed and filters for clogs or blockages.

Hydronic Air Separators · Caleffi 551054A. Compare · Caleffi 551054A Discal Air Separator, 2 in, Sweat, Brass. Caleffi 551054A Discal Air Separator, 2 in, Sweat ...

Resetting the Regeneration Cycle: If the regeneration cycle is too frequent or not frequent enough, it can affect water pressure. Refer to your user manual to adjust the settings, ensuring they align with your water usage.

A whole house reverse osmosis system is only necessary for very specific water problems. There are very few water quality issues that are so severe they can only be addressed by whole house reverse osmosis. Whole house reverse osmosis will most commonly be found in rural homes on wells, where the groundwater is compromised by numerous difficult contaminants. Water with high levels of naturally occurring compounds like arsenic and nitrates can only be treated by reverse osmosis.  Homes built near manufacturing plants may see elevated levels of microplastics, volatile organic compounds like benzene, chemicals like PFAS, or high concentrations of dissolved salts. Removing these contaminants poses a unique challenge that few water filtration systems are equipped to tackle. When these contaminants emerge in unison they can be especially troublesome, and reverse osmosis is sometimes the most viable way to eliminate them from the water. If you live with water with exceptionally elevated levels of TDS, you may decide you want to protect your entire home from these contaminants by installing a whole house RO system.

Adjusting the Sizing: If your water softener proves insufficient for your home, contemplate upgrading to a larger unit. Seeking professional guidance may be necessary to determine the suitable size, taking into account your household’s water consumption.

High Water Hardness Level: In areas with extremely hard water, the softener has to work harder and more frequently to soften the water, which can overburden the system and potentially affect water pressure.

By following these steps, you can more accurately identify whether your water softener is the cause of your low water pressure woes. Keep in mind that performing regular maintenance and addressing issues promptly can help maintain the optimal functionality of your water softening system.

From exploring the initial signs of pressure issues to diagnosing and resolving potential problems caused by water softeners, this article provides a thorough overview. We’ll guide you through various steps and considerations to help you determine if your water softener is the reason behind low water pressure and offer practical solutions and maintenance tips.

The best way to test your well water is to collect a water sample from your well and send it to a state or nationally certified laboratory to be tested. Your water samples will then be subjected to the same water quality tests used to ensure the safety of bottled water and municipal water supplies. Water test labs use the EPA standards for safe drinking water to check your well, measuring the presence of contaminants in the parts-per-million. Within two weeks, they will return your report to you, flagging every instance where your water exceeds the EPA’s regulatory standards for safe drinking water.

Very few whole house reverse osmosis systems exist in isolation. If the water quality from your well is so poor that you need a whole house system, it’s likely you will need the aid of other water treatment systems to preserve the RO system and maximize performance. The reverse osmosis membrane is adept at eliminating chemicals, salts, and dissolved inorganic matter. However, to prolong the lifespan of the membrane, it needs to be protected from certain water contaminants. This is one of the many reasons why a thorough water test is necessary, as knowing the composition of your water informs how best to pre-treat it.

If your water softener is too small, you may notice frequent regeneration cycles, as it struggles to keep up with your household’s water demand. This frequent regeneration can lead to inconsistent water pressure and an increase in salt usage. Another sign is hard water symptoms, such as scale buildup or dry skin, despite having a functioning softener. These issues arise because the softener doesn’t have the capacity to soften all the water coming into your home, indicating the need for a larger or more efficient model.

23 Apr 2018 — How do you size a domestic hot water thermal expansion tank? Bell & Gossett has an online selection program called ESP-Systemwize that will make the selection ...

To ascertain whether your water softener is the culprit behind low water pressure, begin by examining other faucets in your home for similar problems. If you observe low pressure throughout, consider utilizing the bypass valve on your water softener. This diverts water away from the softener. If water pressure improves when the softener is bypassed, it’s likely the cause. Also, check for salt bridges, resin bed clogs, or leaks around the softener, which can contribute to pressure issues.

If you have a lower efficiency system, you could potentially send up to thousands of gallons to the drain every day. Even in high-efficiency systems, waste and recovery will be influenced by your raw water chemistry. As water scarcity continues to spread across the American Midwest, having your home dependent on such a high waste system can be a cause for concern.

Certainly, leaks within the water softener system have the potential to result in diminished water pressure. These leaks may manifest in different components of the system, including the pipes, valves, or the tank itself. These leaks not only waste water but also reduce the overall pressure in your home’s plumbing system. Indeed, if you observe damp areas, water accumulation around the softener, or unexpected spikes in your water bills, these signs could signify the presence of a leak. It is imperative to promptly resolve any leaks to uphold sufficient water pressure and prevent potential water-related damage.

Cleaning the Resin Bed: Regularly cleaning the resin bed can prevent clogs and maintain water flow. You have the option to utilize a resin bed cleaner readily accessible at many home improvement stores. Follow the instructions carefully, usually involving pouring the cleaner into the brine tank and initiating a regeneration cycle.

PRVs are required at any point where the system static pressure exceeds 80 PSI. Typically, this applies to mid- and high-rise buildings.

Whole house reverse osmosis systems take up a lot of space. As we’ve discussed, you will need substantial prefiltration and post-treatment of the water to ensure the reverse osmosis membrane operates effectively. You will need a spacious room to install water softeners and their brine tanks, a mineral tank for your pH adjuster, and the large RO system itself. Water storage tanks capable of holding 250-500 gallons of water are going to be six feet tall or greater.

For example, a house of four would want to have access to at least a 250 gallon storage tank. Part of the key to running a successful whole house reverse osmosis system is ensuring that you have a system with a great enough output to keep the tank full. The reverse osmosis process works very slowly, with many residential under-sink units only producing around 50 gallons per day. To plumb a whole house, you want a system that will be able to replenish your storage tank without you ever running out of water. So, for a family of four using a 250 gallon storage tank, something like a 1,000 GPD RO system may be ideal. A 1,000 GPD system operating at peak capacity would take a little over 6 hours to fill up a 250 gallon tank. (As a 1,000 GPD system would be producing between 41-42 gallons of water an hour.) If the RO’s output is too low, the tank will never become full, and the RO unit will be running constantly to barely meet the household water demands. If you were ever to host family or friends for an overnight stay or large dinner party, the tank would empty out rapidly and be unable to catch up to demands exerted on it by the guests. This is why you would need a system capable of producing something like a 1,000 gallons per day, even if you plan on using less than half that. Whenever you are sizing a whole house reverse osmosis system, you should call a water specialist and have them help you correctly size the system and tank to support you and your home.

It’s recommended to check for salt bridges and resin bead blockages in your water softener every 2-3 months, especially in areas with hard water. Regular inspections gain greater significance when alterations in water quality or pressure become noticeable. During these inspections, look for hard crusty layers (salt bridges) on top of the salt in the brine tank and clear them. For resin bead blockages, examine filters and screens for any trapped beads. Regular maintenance like this helps prevent major clogs and keeps your water softener functioning effectively.

At CPI Plumbing & Heating, we are committed to ensuring that individuals with disabilities enjoy full access to our websites. In recognition of this commitment, we are in the process of making modifications to increase the accessibility and usability of this website, using the relevant portions of the Web Content Accessibility Guidelines 2.0 (WCAG 2.0) as our standard. Please be aware that our efforts are ongoing. If at any time you have difficulty using this website or with a particular web page or function on this site, please contact us by phone at (360) 219-9468; or email us at customerservice@cpiplumbing.com and place “Web Content Accessibility (ADA)” in the subject heading and we will make all reasonable efforts to assist you.

Municipal water supplies are disinfected by chlorination and quite unlikely to contain levels of contaminants that could only be addressed by reverse osmosis. Contaminants you may find in city water like water hardness, chlorine, chloramines, and lead can all be treated effectively by other whole house water filtration systems. However, some people on municipal water simply prefer RO water and want the entirety of their home to use reverse osmosis water. People are also increasingly concerned about the presence of fluoride in municipal water. Fluoride, a naturally occurring mineral, is synthetically added to city water supplies to reduce the risk of tooth decay in children. Fluoride is extremely tough to remove from water. The industry standard for removing it is by using a filtration media called activated alumina, a process that is impractical for most applications. Activated alumina requires very lengthy contact time with the water to reduce fluoride, and produces water at a rate of about 0.25 GPM. Plumbing a whole house with such low water pressure is ultimately unfeasible, so those wanting to remove fluoride from their home entirely usually turn to reverse osmosis.

Resin Bed Issues: Over time, the resin bed in your water softener, which is responsible for softening hard water, may become less efficient. If it gets clogged with minerals or other debris, it can restrict water flow, leading to pressure issues.