Concealed electronic mixing valve with surface mount control panel for individual shower flow and ±2°F (±1°C) temperature control.

pressure reducing valve 2" inch male thread male thread BSP-T made of gunmetal/brass seal EPDM for liquid and gaseous media (no steam), set pressure 1.0 - 8.0 bar

Digital Recirculation Valve (DRV), with BrainScan® - Hot water monitoring control module, designed specifically to be the primary water temperature controller in a continuously pumped circulating hot water system.

We do not adhere to rigid guidelines but instead focus on the individual wishes and needs of our customers. They are more important to us than internal company processes.

Concealed electronic mixing valve with surface mount control panel for bath and shower flow and ±2°F (±1°C) temperature control.

Digital technology provides enhanced water temperature control accuracy which resists zero system demand "Temperature Creep" without the use of a manual throttling valve or a temperature activated pump shut-off device (aquastat).

The integral RS485 Serial Port on The Brain® Digital Recirculating Valve (DRV) can be used to connect the DRV directly to a Building Automation System (BAS) using Modbus RTU or to an optionally selected BS - Connectivity Module which enables interface with a BAS operating on Modbus, BACnetTM or LonWorksTM protocols.

Model DRV50: Model DRV50 is a Digital Re-Circulating Valve (DRV) designed for systems which experience diverse draw-off between 0 - 73 GPM*. DRV50 is a model DRV80 provided with bushed down 2" NPT connections.

pressure reducing valve 1/2" inch male thread male thread BSP-T made of gunmetal/brass seal EPDM for liquid and gaseous media (no steam), set pressure 1.0 - 8.0 bar

Delivery time: 3 - 5 working days

pressure reducing valve 1/2" inch male thread male thread BSP-T made of stainless steel seal EPDM for liquid and gaseous media (no steam), set pressure 1.0 - 8.0 bar

Thermostatic Mixing Valve of "sealed for life" replaceable cartridge construction. Compact design is ideally suited for use at or near the final point of use to deliver a pre designated mixed water temperature to either a single or a small "group" of lavatories.

Model DRV80: Model DRV80 is a Digital Re-Circulating Valve (DRV) designed for systems which experience diverse draw-off between 0 - 165 GPM* and is provided with 3" NPT connections.

Flange-pressure reducing valve DN 15 PN40 flange acc. DIN EN 1092 made of stainless steel seal EPDM for liquid and gaseous media (no steam), set pressure 1.0 - 8.0 bar

Capable of close temperature control at diverse flow rates between .5 and 11 gpm (1.9 and 41.6 lpm). Unit is supplied as standard with a tamper proof single temperature "locking" shroud and variable temperature control trim set.*

M&M Control Service, Inc. does not represent or claim any affiliation, association, connection or approvals with or from any manufacturer unless stated. We fully acknowledge all trademarks and/or names which are pictured and/or listed throughout the M&M Control Service, Inc. Website.

Armstrong is a global provider of innovative water temperature control solutions for Institutional hygiene and Industrial process applications. For Healthcare, Hospitality, Educational and Correctional Institutional buildings, Armstrong provides Digital (The Brain®) and Thermostatic solutions that place user safety and Legionella risk reduction at the forefront of hot water system design, operation and maintenance.

The integral RS485 Serial Port can receive the following outputs from the DRV and communicate them via BS - Connectivity Module or Modbus.

Features two Thermostatic Mixing Valves and derivative assemblies designed specifically for use in non-return "dead leg" applications. The range has been designed to offer accurate temperature control in installations where there are diverse flow requirements.

Flange-pressure reducing valve DN 40 PN40 flange acc. DIN EN 1092 made of stainless steel seal EPDM for liquid and gaseous media (no steam), set pressure 1.0 - 8.0 bar

PRVvalve

pressure reducing valve 2" inch male thread male thread BSP-T made of stainless steel seal EPDM for liquid and gaseous media (no steam), set pressure 1.0 - 8.0 bar

WARNING: Some of the products we sell can expose you to chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Contact your sales rep or go to www.P65Warnings.ca.gov for more information.

Digital Recirculation Valve (DRV), with BrainScan® - Hot water monitoring control module, designed specifically to be the primary water temperature controller in a continuously pumped circulating hot water system. DRV40RBS, DRV50RBS, and DRV80RBS are supplied with a recirculation return manifold as shown.

Flange-pressure reducing valve DN 25 PN40 flange acc. DIN EN 1092 made of stainless steel seal EPDM for liquid and gaseous media (no steam), set pressure 1.0 - 8.0 bar

Model DRV40: Model DRV40 is a Digital Re-Circulating Valve (DRV) designed for systems which experience diverse draw-off between 0 - 41 GPM* and is provided with 1.5" NPT connections.

Fully Digital Mixing Centers (DMC), with BrainScan® - Hot water monitoring control module - (BS - Connectivity Module), designed specifically to be the primary water temperature controller in a continuously pumped circulating hot water system.

The integral RS485 Serial Port provides an ability to remotely program the DRV and update the firmware via BS - Connectivity Module or Modbus.

Digital Recirculation Valve (DRV) designed specifically to be the primary water temperature controller in a continuously pumped circulating hot water system. DRV40R, DRV50R, and DRV80R are supplied with a recirculation return manifold as shown.

Flange-pressure reducing valve DN 40 PN16 flange acc. DIN EN 1092 made of gunmetal/brass seal EPDM for liquid and gaseous media (no steam), set pressure 1.0 - 8.0 bar

Our water pressure reducing valves are all DVGW approved, as required for usage with water or drinking water. Additionally, when installed in buildings, water-pressure-reducing-valves should be sound tested. Our pressure regulators come with a high quality stainless steel sieve. When used in domestic water installations, according to DIN 1988 DVGW guideline, a flow rate of 2m/s should not be exceeded. If you need any help setting your pressure regulating valve for drinking water, please contact our staff for free and timely advice, or find all necessary information in our data sheets.

Fully Digital Mixing Centers (DMC) designed specifically to be the primary water temperature controller in a continuously pumped circulating hot water system.

We always strive to find the best solution for our customers. It is our goal and incentive to have completely satisfied customers.

Delivery time: 3 - 5 working days

Delivery time: 3 - 5 working days

The integral RS485 Serial Port can receive the following selfdiagnostic error messages from the DRV and communicate them via BS - Connectivity Module or Modbus.

Our certified quality management according to DIN EN ISO 9001: 2015 is part of our DNA. With our test stands we can carry out pressure tests with up to 350 bar with air and water as well as leak tests according to DIN EN 122661.

*This list may vary, as names not appearing on this list are entitled to the acknowledgment of their Trademarks by M&M Control Service, Inc.

* Use of the trim set allows for full temperature control to within 5°F (2°C) of either inlet supply along with an integral maximum temperature limit stop and single temperature locking option.

Delivery time: 3 - 5 working days

pressure reducing valve 1 1/2" inch male thread male thread BSP-T made of gunmetal/brass seal EPDM for liquid and gaseous media (no steam), set pressure 1.0 - 8.0 bar

Digital Recirculation Valves (DRV) are designed specifically to be the primary water temperature controller in a continuously pumped circulating hot water system.

For Food, Pharmaceutical and Chemical processing Industrial plants, Armstrong provides EmechTM Digital Steam/Water Mixers for instantaneous hot water generation and EmechTM Digital Control Valves for mixed water temperature control that enhance system performance and reliability.

Delivery time: 3 - 5 working days

Pressure Reducing Valve

Delivery time: 3 - 5 working days

Delivery time: 3 - 5 working days

Delivery time: 3 - 5 working days

pressure reducing valve 3/4" inch male thread male thread BSP-T made of gunmetal/brass seal EPDM for liquid and gaseous media (no steam), set pressure 1.0 - 8.0 bar

Commitment engenders trust. We stand by our word and are convinced that as a result not only our customers but also everyone we work with can rely on us.

pressure reducing valve 1 1/4" inch male thread male thread BSP-T made of gunmetal/brass seal EPDM for liquid and gaseous media (no steam), set pressure 1.0 - 8.0 bar

Water valve

Delivery time: 3 - 5 working days

Special requests, spare parts or a quick support? Our staff will answer your questions and concerns immediately.You can reach us from Monday to Friday at +497143 9666900 and any time at sales@nieruf.com

(PowersTM, also known as, POWERS REGULATOR, MCC POWERS, POWERS-FIAT, POWERS PROCESS CONTROLS, CRANE POWERS and POWERS, a Watts Industries Company. The POWERS trademark is owned by Powers, A Division of Watts Water Technologies, Inc. M&M Control Service, Inc. Is a Stocking Distributor for PowersTM)

Delivery time: 3 - 5 working days

Our water-pressure-reducing-valves are all DVGW approved, as required for usage with water or drinking water. Additionally, when installed in buildings, water pressure reducing valves should be sound tested. Our pressure regulators come with a high quality stainless steel sieve. When used in domestic water installations, according to DIN 1988 DVGW guideline, a flow rate of 2m/s should not be exceeded. If you need any help setting your pressure regulating valve for drinking water, please contact our staff for free and timely advice, or find all necessary information in our data sheets.

Delivery time: 3 - 5 working days

Complete operating mechanism is enclosed in a durable disposable polymer cartridge for ease of maintenance. Powerful internal movement of the hot and cold water proportioning mechanism resists mineral deposition.

Water pressureregulator

Concealed electronic mixing valve with surface mount control panel for individual bath fill and ±2°F (±1°C) temperature control.

pressure reducing valve 1 1/2" inch male thread male thread BSP-T made of stainless steel seal EPDM for liquid and gaseous media (no steam), set pressure 1.0 - 8.0 bar

When configured for Modbus the DRV becomes a Remote Terminal Unit (RTU). The BAS will need to be using a Modbus RTU format. When connected directly to a BAS using Modbus, the DRV can be assigned a unique network address which is programmed via the integral DB9 external port.

Technical and commercial expertise form the basis for developing qualified solutions tailored precisely to the needs of our customers.