For a home builder, it is important to find the right store where one can get all the valuable information about home building. Use the Store Locator feature and visit our store for more information on home building.

The types of rainwater harvesting will help us understand the system better. It is best to learn about them so we know which one works best for us and accordingly learn about the steps of rainwater harvesting.

It helps conserve water: The idea of harvesting water allows you to save water and use it effectively. This is the most effective way of water conservation. However, pay extra attention to the rainwater harvesting system in place. Carry out a strength test of the concrete, curing of concrete and the careful transporting and placing of concrete.

In urban areas, rainwater flows away as surface runoff. This runoff can be caught and used for recharging aquifers by adopting appropriate methods.

Every home-builder wants to build their dream home but do so without going over-budget. By using the Cost Calculator, you’ll get a better idea of where and how much you might end up spending.

It is preferable to have the pipe as a single fall to avoid sediment collecting in places that cannot be reached easily for cleaning.

Searching for a water leakage solution? Delve into our blog to identify common water leakage problem and discover effective remedies to safeguard your home from potential damage.

With the human population facing major water scarcity and reports suggesting that more than half the world’s population will be living in water-stressed regions by 2050 (Water Aid), there is an urgent need for a system that helps the human race get access to fresh water. The solution to this problem is rainwater harvesting. It is the most sustainable way of accessing fresh water and does not require any energy for functioning. It does not deplete any natural resources, on the contrary, helps conserve and protect the natural habitat. This read is all about understanding the steps of rainwater harvesting and understanding how there is a need for rainwater harvesting.

20231120 — Bernoulli's equation is a fundamental principle in fluid mechanics that describes the relationship between flow velocity, pressure, and height ...

Meters larger than 25mm do not include backflow prevention devices. For these meters/services an appropriately licensed plumber is required to assess and apply the correct backflow preventative measures appropriate to the property’s hazard ratings. Some backflow-prevention devices are testable and must be checked regularly by a licenced person endorsed for backflow testing.

Storing water underground is good for the environment: Storing rainwater underground eliminates evaporation and provides long-term storage, it can also replenish groundwater supply, prevent seawater from intruding, and protect ecosystems that depend on groundwater for their very survival.

A safety valve is designed to open and relieve excess pressure from vessels or equipment and to reclose and prevent the further release of fluid.

A specially engineered liquid that seals drain traps to prevent odors and preserve a sanitary "septic seal". Concentrated and ready-to-use, ...

Taking a home-loan is one of the best ways to finance home-building but home-builders often ask how much EMI they’ll need to pay. With the EMI Calculator, you can get an estimate that will help you better plan your budget.

Testing backflow-prevention devicesAll testable backflow devices must be registered with Access Canberra at the time of installation. This is so they can be tracked and managed.

The steps of rainwater harvesting may seem lengthy however if implemented correctly, this system will last you for a lifetime.

Who can assess, install and test for backflow prevention?Only licensed plumbers with backflow-prevention accreditation (issued by a registered training organisation) can assess your properties backflow requirements and install, commission or test backflow devices.Our organisation takes water quality management very seriously. We partner with the Water Services Association of Australia (WSAA) and Access Canberra to ensure we are up to date on a range of topics, including backflow prevention and cross contamination.

Understand what is Cement Waterproofing. Read the blog to learn about the various types of cementitious waterproofing including liquid waterproofing membranes and bituminous coating.

Improves groundwater table thereby saving energy to lift water: Rainwater harvesting systems recharge run-off surface water to the underground aquifer to increase the water level and its quality. This has resulted in creating a sustainable groundwater table even when there is less rainfall.

Mitigates the effect of drought: Many countries, especially those with arid environments, use rainwater harvesting as a cheap and reliable source of clean water. When drought occurs, rainwater harvested in past months can be used. In deserts, ridges of soil are constructed to trap and prevent rainwater from running hills and slopes and enhance irrigation. Even in periods of low rainfall, enough water is collected for crops to grow.

3 Oct 2024 — A ball valve is a shut-off device that regulates the flow of a liquid or gas using a rotating ball with a hole.

Promotes adequacy of underground water: With the rise in population, the dependency on groundwater is increasing. Many residential colonies and industries are extracting groundwater to fulfill their daily demands. This has led to a depletion of groundwater which has gone to a significantly low level in some areas where there is huge water scarcity. Rainwater harvesting enables groundwater levels to be further sustained rather than depleted.

3 Aug 2017 — Gas types are not interchangeable. Natural Gas orifices will have a larger hole as it is a lower pressure gas and Propane is a compressed gas ...

Choose from our selection of mixing valves, including temperature-regulating valves, threaded temperature-regulating valves, and more.

When it comes to Canberra's water network, all drinking and recycled water connections must have backflow containment protection. This reduces the backflow hazard your property might pose to our supply.

It is important for a home builder to select the right products during the initial stages of constructing a home. Use the Product Predictor to see which products will be needed while building your home.

A mesh filter at the mouth and first flush (also known as roof washer) device which will divert the first flow of water away from the tank.

Ashirvad Grease & Solid Interceptor provide immense value and superlative performance to commercial kitchen operators. With no moving parts or heating elements, ...

It is cost-effective: Rainwater harvesting is a cost-effective alternative to other water recycling methods and is easier on the pockets as it is a long-term investment. Moreover, it removes the need for the transportation of water to the doorstep via various means.

Property owners are responsible for ensuring the correct backflow prevention device has been installed on their water service. As such, each property’s backflow prevention requirements need to be assessed by a licensed plumber or hydraulic consultant.

The system of catching rainwater right where it falls. In rooftop harvesting, the roof becomes the catchment area and the rainwater is collected on the roof of the house or building. It can either be stored in a tank or diverted to an artificial recharge system. This method is less expensive, and if implemented correctly, helps in augmenting the groundwater level of the area.

Waterproofing methods, Modern kitchen designs, Vaastu tips for home, Home Construction cost

Rainwater harvesting is a sustainable practice that involves collecting, storing, and using rainwater for various purposes. Rainwater harvesting is a great way to collect and store rainwater for various uses like irrigation, washing, and drinking. With proper planning and installation, rainwater harvesting systems can be effective and valuable solutions to water scarcity and droughts. By setting up a system, you can save money on your water bills, reduce your reliance on municipal water supplies, and most of all help conserve water.

25 Jan 2017 — Some boilers use a probe-type low-water cutoff. This control is a little different, as the probe is inserted directly into the boiler. It uses ...

Connect some sort of overflow arrangement. If the tanks are in a sump it would require overflow arrangement and lots of drainages. When the overflow is undersized, pumps will flood.

Testable backflow-prevention devices are those that include features to allow testing in-situ, i.e. without the need to remove the device. Backflow-prevention devices must be installed by an appropriately qualified licensed plumber and tested every 12 months (in line with AS/NZS 3500 and AS/NZS 2845.3:2020). What is backflow? The unintended reversal of water flow from a potentially contaminated source into a drinking water supply, such as the water supply network, is termed backflow. Safety impacts can range from a minor nuisance to endangered health or even death. What is backflow-containment protection?A backflow-prevention device installed downstream of the water meter, but before any branches or connections, is a backflow-containment device. It is designed to stop water from flowing back into the water supply network.How can backflow occur? Backflow may occur when the pressure in a main is lower than the pressure within a customer’s property. While our systems are designed to avoid pressure differentials, there is still a risk they may occur. This unintended variance is caused by any events that move water from the consumer pipework into the water main, such as:

5 May 2024 — A pipe velocity calculator is used to calculate the velocity of water in a pipe. Based on water flow rate requirements, we can calculate the pipe size.

The saline water from the sea gets evaporated due to the heat from the sun, forms clouds and falls as rain as freshwater. A significant part of this rainwater drains out into oceans and drains. If we are able to harness this effectively, it can be an important source which can be used for various applications. So, in short, rainwater harvesting is the process of storing rainwater for reusing rather than allowing it to run off. However, it is vital to understand the steps of rainwater harvesting before that.

Waterproofing of terrace is crucial to better prevent water seepage and leakage. Read expert recommended tips for terrace waterproofing solutions, methods, and chemicals for lasting protection.

We provide a backflow prevention device for 20 and 25mm water meters in the form of integrated non-testable dual check valves. While these integrated check valves provide adequate low-risk backflow protection, they may not necessarily meet the minimum backflow requirements for every type of property. For example, this backflow protection is insufficient for industrial and commercial operations or residential properties that make use of medium or high-risk appliances/activities.

Waterproofing methods, Modern kitchen designs, Vaastu tips for home, Home Construction cost

Double Check Detector Assembly (Dcda) Valve Spare Parts 3000 Ss Series - WATTS Double Check Detector Assembly (Dcda) Valve Spare Parts 3000 Ss ...