Aqua-Flash® AMK-UK Instruction SheetSubmittal Data SheetBrochure Aqua-Flash® AMK-UK Universal Kit  Bypass Valve, Hose and Tee For Hot Water Tanks and Indirect Heaters The new AMK-UK brass and stainless valve kit with bi-metal coil provides 90° F hot water to every faucet. It does not require power under the sink The AMK-UK has a unique advantage, it can handle larger pump pressures up to 21 ft. hd. and provide quiet operation. The kit includes valve, hose and tee and can be installed quickly onto the cold angle stop. A hot water circulator needs to be installed at the hot water tank. Additional Under-sink bypass valve kits- up to 5 per pump. To be used with AMH1K-3UV AquaMotion , 70600 Nevercold, and FT1 APCOM.

Hot water recirculationsystem design

Max GPM Flow: 7gpm Max Head Feet: 4ft Material: Stainless Steel Connection Type: Union_Half Check Valve: Yes Pump Speed: Single Speed Corded: Yes AM3-SUCV1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ Stainless AM3 with 1/2″ Union Sweat Fittings, BICV, Line Cord and Timer

Type of Hot Water Heater: Tankless Outdoor Type of Household Plumbing: Dedicated_Return Max GPM Flow: 17gpm Max Head Feet: 11ft Material: Stainless Steel Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH2K-7X Instruction SheetSubmittal Data SheetBrochure AQUA-SHIELD™ AMH2K-7X -Dedicated Return Line AMH2K-7X for  Outdoor tankless with less than .4 GPM flow requirement (union body) Includes: AM7-SUV1AXLT1 and UK75T 3/4″ Threaded Male Fittings For Outdoor Installed Tankless Heater without built-in Pump on Dedicated Return Line Primary Market Southern Tier of the US Outdoor installation saves on expensive air intake, exhausts Easy to service outdoor installed pump Pump freeze protected and water and sprinkler safe Greater choice of tankless models Automatic, built-in thermostat/switch designed for hot climate (115-125 F degrees), timer and 10 ft. line cord Clear cover with Timer visibility Meets Title 24 California (only with Aquastat) Aqua-Shield™ Pat. Pending

Max GPM Flow: 18gpm Max Head Feet: 20ft Material: Connection Type: 2_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMRe-FVL High Efficiency ECM Circulator Instruction SheetSubmittal Data SheetBrochure The NEW AMRe-FVL High Efficiency ECM circulator  for heating with IRON GUARD™ is fully automatic, no buttons to push, steel circulator with stainless cartridge. Does not require iron filter in the system to protect the circulator. External iron filter cost as much as the pump. 6 1/2 ft. replaceable line cord included to save money an time on installation. High performance of 20 ft. x 18 GPM, 120/1/60, low 45 watt draw, universal 2 bolt flange with nut retainer, built-in check valve, replaceable cartridge, a green sustainable product. The AMRe replaces the Taco oo7 oo7e 0015 0015e 1816e 0018e, Grundfos 15-42, 15-58, Alpha I & II and others with one single model.

Duplex strainers are like simplex strainers times the power of two, but they are also capable of much more. These are a few of the benefits and reasons for ...

With Amp draws ranging from 0.46 amps to 0.79 amps the AMR offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation.

FK100S Submittal Data Sheet 1″ NPT, Includes Two Stainless Steel Flanges, Four Bolts, Four Nuts, Two Square Gaskets. Flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench Fits AquaMotion models AM5, AM7, AMR, AM10

AMR-SF2, TwinTurbo Stainless Steel, HeadFt:36 GPM:14 AMR-SFV2, TwinTurbo Stainless Steel with check valve, HeadFt:36 GPM:13

SO100S Submittal Data Sheet 1″ Sweat Isolation (shut-off) Flanges:  Full Port Ball Valve with 360° Swivel Includes Two Flanges, Four Bolts, Four Nuts, and Two Gaskets. Forged brass body full port for water application 600 PSI Non-Shock WOG Allows draining of the non-pressure side of the valve when closed

AM7-SU1LXZT1 Stainless Union Circulator with 3/4″ Male Tailpieces, with outdoor enclosure, water, sprinkler, bug, freeze protected, anti-tampering locking device tab, built-in timer, 10 ft. line cord, pump bypass connection, check, flow control, hose, bypass Tee 3/4″ FNPT x 3/4″ MNPT x 3/8″ OD Compression. AMK-ODR bypass valve kit: Bypass valve, hose, Tee. Valve maintains 95° F. Installs under sink on the cold angle stop and no power required under sink. Patented.

With Amp draws ranging from 0.46 amps to 0.79 amps the AMR offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation.

With an Amp draw of just 0.60 amps the AM7 offers high performance and high efficiency. The AM7 operates at 18% higher efficiency than leading competitors circulators. The AM7-SF1 uses standard 2-bolt circulator flanges for easy installation.

Max GPM Flow: 16gpm Max Head Feet: 20ft Material: Cast Iron Connection Type: Flange, 4_Bolt_Flange Check Valve: Yes Pump Speed: Three Speed AMR-3FV1 Instruction SheetSubmittal Data SheetCurvesBrochure With Amp draws ranging from 0.46 amps to 0.79 amps the AMR offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation. Circulator comes with BICV™ built in check valve. The AMR circulator replaces Grundfos model UPS15-58, Taco 00R, Taco 0015, and Wilo STAR S21 and other model circulators.

AMH3K-7 is designed for standard plumbing systems with hot water pipe length up to 250ft of total pipe length for hot water tanks

AQUA-SHIELD™ Circulator for Outdoor installation. Installs on TANKLESS HEATER WITHOUT BUILT-IN PUMP FOR SINGLE PIPE INSTALLATION, USE WITH ON DEMAND- For up to 600 Ft. of total pipe length and tankless for all minimum flow rates. Stainless high speed circulator, flanged, 10 ft. line cord, with outdoor enclosure, for water, sprinkler, bug and anti-tampering locking device tab. Timer set to “On” only. AMK-ODR bypass valve kit (maintains 95F degrees) installs under fixture, Includes AMK-WB ON DEMAND-FK75S 3/4″ Stainless Flanges Included. Patent pending. – . Meets CA Title 24 with On Demand. Freeze protection does not work with this model because of the On Demand Kit.

Type of Hot Water Heater: Tankless Outdoor Type of Household Plumbing: Dedicated_Return Max GPM Flow: 16gpm Max Head Feet: 20ft Material: Stainless Steel Connection Type: 4_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH2K-RX Instruction SheetSubmittal Data SheetBrochure AQUA-SHIELD™ AMH2K-RX- Dedicated Return Line Outdoor Recirculation Pump AMH2K-RX for Outdoor tankless Includes: AMR-SFV1AXLT1 (flanged body) and FK75S 3/4″ Stainless Flanges For Outdoor Installed Tankless Heater without built-in Pump on Dedicated Return Line Primary Market Southern Tier of the US Outdoor installation saves on expensive air intake, exhausts Easy to service outdoor installed pump Pump freeze protected and water and sprinkler safe Greater choice of tankless models Automatic, built-in thermostat/switch designed for hot climate (115-125 F degrees), timer and 10 ft. line cord Clear cover with Timer visibility Meets Title 24 California (only with Aquastat) Aqua-Shield™ Pat. Pending

Max GPM Flow: 16gpm Max Head Feet: 11ft Material: Stainless Steel Connection Type: NPT Pump Speed: Single Speed Corded: Yes AM7-ST1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ AM7 Stainless 3/4″ NPT with line cord and timer.

Other methods that I have used include the “snow marshmallow” where you take a large, soccer-ball sized lump of snow (like the hardpacked kind you make for a snowman), and place it on a stick anchored near the fire. Place a container under the stick, and the water should run down the stick as it melts. I have also heard of survivors using black trash bags and reflective emergency blankets with snow on top to passively melt snow in the sun.

With Amp draws ranging from 0.45 amps to 0.75 amps the AM10 offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation.

Bypass. Series N55B/LFN55B. Threaded Female Inlet x NPT Threaded Female Outlet. N55B M1. 0007708. 1/2. 098268195828. 12. 26. $ 134.70. N55B M1. 0007709.

Max GPM Flow: 11gpm Max Head Feet: 8ft Material: Stainless Steel Connection Type: Union_Half, Union Check Valve: Yes Pump Speed: Single Speed AM6-SUCV1 Instruction SheetSubmittal Data SheetCurvesBrochure With  an Amp draw of only 0.54 amps the AM6 offers high performance and high efficiency. The SUCV1 features union connections with 1/2″ bronze sweat fittings. All stainless steel models are fully lead free. Circulator comes with BICV™ built in check valve. Our AM6 circulator replaces Taco 006 models and other model circulators.

Max GPM Flow: 11gpm Max Head Feet: 18ft Material: Stainless Steel Connection Type: 4_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed AM8-SFV1 Instruction SheetSubmittal Data SheetCurvesBrochure AM8 Stainless 4 bolt flange with built-in check valve

Max GPM Flow: 16gpm Max Head Feet: 20ft Material: Stainless Steel Connection Type: Flange, 4_Bolt_Flange Check Valve: Yes Pump Speed: Three Speed AMR-S3FV1 Instruction SheetSubmittal Data SheetCurvesBrochure With Amp draws ranging from 0.46 amps to 0.79 amps the AMR offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation. Circulator comes with BICV™ built in check valve. The AMR circulator replaces Grundfos model UPS15-58, Taco 00R, Taco 0015, and Wilo STAR S21 and other model circulators.

With Amp draws ranging from 0.45 amps to 0.75 amps the AM10 offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation.

With an Amp draw of just 0.60 amps the AM7 offers high performance and high efficiency. The AM7 operates at 18% higher efficiency than leading competitors circulators. The AM7-SF1 uses standard 2-bolt circulator flanges for easy installation.

Max GPM Flow: 20gpm Max Head Feet: 20ft Material: Cast Iron Connection Type: Flange, 4_Bolt_Flange Check Valve: Yes Pump Speed: Variable Speed Corded: Yes AM55-FVL Instruction SheetSubmittal Data SheetBrochure AM55-FVL Cast Iron Circulator has  an Amp draw of only 0.07 to 0.57 amps, and watt consumption of just 5-38 watts the Einstein is the most energy efficient ECM on the market. This pump features 3 fixed speeds, 4 variable speeds and a night set back to maximize energy savings. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation. * Use an iron filter when installing circulator in existing systems to avoid problems with iron oxides. Circulator comes with BICV™ built in check valve. The Einstein circulator replaces the Taco oo7 oo7e 0015 0015e3 1816e 0018e, VR1816, VT2218 Grundfos 15-42, 15-58, Alpha I & II and others with one single model.

The AMK-UK has a unique advantage, it can handle larger pump pressures up to 21 ft. hd. and provide quiet operation. The kit includes valve, hose and tee and can be installed quickly onto the cold angle stop. A hot water circulator needs to be installed at the hot water tank.

Type of Hot Water Heater: Tankless Indoor Type of Household Plumbing: Dedicated_Return Material: Stainless Steel Connection Type: Flange Check Valve: Yes Pump Speed: Three Speed Corded: Yes AMH2K-R Instruction SheetSubmittal Data SheetBrochure AMH2K-R is designed for dedicated return line systems with tankless water heater up to 600 feet of pipe length. Installs near heat source on Return Line Uses Built-In non-adjustable Aquastat (On at 85F/ Off at 105F degrees) Built-in Mechanical Timer Meets Title 24 California

Max GPM Flow: 7gpm Max Head Feet: 4ft Material: Stainless Steel Connection Type: NPT Pump Speed: Single Speed Corded: Yes AM3-ST1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ With  an Amp draw of only 0.46 amps the AM3  3/4″ NPT offers high performance and high efficiency. All stainless steel models are fully lead free. Circulator comes with Line Cord and Timer. Our AM3 circulator replaces Taco 003 models and other model circulators.

Hot Water Comfort at Every FaucetSave Time, No More Waiting For Hot WaterSave Hot Water, 12,000 – 15,000 Gallons a YearSave Energy with Timer, Save on Utility and Sewer BillsSave More with “ON DEMAND” SystemsGo Green, Help Conserve this Precious Water ResourceMeet local Plumbing Codes

A pump at the tank or tankless heater, or installed under the sink, forces the lukewarm water from the hot supply line into the cold supply line. If a dedicated return line is used it returns the lukewarm water to the heater.

A sensor/switch (Aquastat) built into the pump or an Aqua-Flash® or ODR Superflow™ By-pass valve transfers the lukewarm water into the cold pipe. The valves maintain average 93° F (34° C) at the sink. The under sink pump starts when temperature drops to 85° F (30° C) and stops when it reaches 104° F (40° C). The pump runs about 3 times an hour for 2 minutes. A built-in 24-hour mechanical timer allows the user to set the time when he wants instant hot water. An ON DEMAND button/motion sensor or app can also activate the system

Max GPM Flow: 31gpm Max Head Feet: 12ft Material: Cast Iron Connection Type: Flange, 4_Bolt_Flange Pump Speed: Three Speed AM10-3F1 Instruction SheetSubmittal Data SheetCurvesBrochure With Amp draws ranging from 0.45 amps to 0.75 amps the AM10 offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation. The AM10 circulator replaces Taco 0010 circulators and other circulator models.

Other methods that I have used include the “snow marshmallow” where you take a large, soccer-ball sized lump of snow (like the hardpacked kind you make for a snowman), and place it on a stick anchored near the fire. Place a container under the stick, and the water should run down the stick as it melts. I have also heard of survivors using black trash bags and reflective emergency blankets with snow on top to passively melt snow in the sun. On short dayhikes, I bring along a Nalgene water bottle that is covered from top to bottom with black duct tape to provide me with a passive solar snow-melting device. I have another (lightweight “whiskey” flask) bottle that has a 3’ loop of webbing taped on so I can wear it around my neck and inside my parka where my bodyheat converts the snow into water while I hike. If you are going to melt snow in your cooking pot over the fire or campstove, be sure to add a little water first unless you like the taste of burnt snow.

Shop our range of BBQ Gas Fittings at warehouse prices from quality brands. Order online for delivery or Click & Collect at your nearest Bunnings.

Thermostatic mixing valves testing must be done by a qualified plumber annually, such as CRG. A TMV is a valve that blends hot & cold water.

With  an Amp draw of only 0.54 amps the AM6 offers high performance and high efficiency. The SUCV1 features union connections with 1/2″ bronze sweat fittings. All stainless steel models are fully lead free.

Max GPM Flow: 29gpm Max Head Feet: 12ft Material: Cast Iron Connection Type: Flange Check Valve: Yes Pump Speed: Three Speed AM10-3FV1 Instruction SheetSubmittal Data SheetCurvesBrochure With Amp draws ranging from 0.45 amps to 0.75 amps the AM10 offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation. Circulator comes with BICV™ built in check valve. The AM10 circulator replaces Taco 0010 circulators and other circulator models.

Replacement cartridge for the AM7 circulator and the Taco 007 circulators. The CT07 replaces the Taco part RP007-042RP and 007-042 at 20-40% lower cost

US Patents, RTM, 9,864,647, D834, 145, 8,083,500, 8,303, 184, 9,328,736, 10,612, 793, 5,501,838, 4,507,949, 11,193,605. Canadian Patents 2,883,495 & 2,935,949

Max GPM Flow: 29gpm Max Head Feet: 11ft Material: Stainless Steel Connection Type: 4_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed AM10-SFV1 Instruction SheetSubmittal Data SheetCurvesBrochure AM10 Stainless 4 bolt flange with built-in check valve

Material: Stainless Steel Connection Type: Flange, 4_Bolt_Flange Pump Speed: Single Speed TwinTurbo-S Instruction SheetSubmittal Data SheetBrochure TwinTurbo Cast Iron or Stainless Steel: 2 AMR  or 2 AM10 Pumps wired together set on medium or high speed. Benefits and features: More competitively priced than Higher horsepower single pumps with similar performance Two pumps in series doubles the pressure output of a single pump Pre-wired in series, installation wiring is the same as a single unit Duel pumps allow one to be operated alone or both together On solar drain back systems, both pumps can be used to fill the system and one turned off during operation. Four bolt flange pattern, 12 1/2” flange to flange dimensions for easy installation in new or existing installations Available with or without built in Check Valve (add “V” to part number, i.e. AMR-SFV3) Available in Cast Iron and Stainless Steel Construction AMR-SF3, TwinTurbo Stainless Steel, HeadFt:41 GPM:17 AMR-SFV3, TwinTurbo Stainless Steel with check valve, HeadFt:41 GPM:16 AMR-SF2, TwinTurbo Stainless Steel, HeadFt:36 GPM:14 AMR-SFV2, TwinTurbo Stainless Steel with check valve, HeadFt:36 GPM:13 AM10-SF3, TwinTurbo Stainless Steel HeadFt:24 GPM:29 AM10-SFV3, TwinTurbo Stainless Steel with check valve HeadFt:24 GPM:28 AM10-SF2, TwinTurbo Stainless Steel, HeadFt:21 GPM:24 AM10-SFV2, TwinTurbo Stainless Steel with check valve, HeadFt:21 GPM:23

Hot waterrecirculating system with dedicated return line

With  an Amp draw of only 0.46 amps the AM3 offers high performance and high efficiency. The SUEV1 features union connections with 3/4″ bronze sweat fittings. All stainless steel models are fully lead free.

AMK-MS Instruction Sheet On-Demand Wireless Control Kit – Motion Sensor and Receiver (Motion Sensor available separately AMK-MSR)

With Amp draws ranging from 0.45 amps to 0.75 amps the AM10 offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation.

How to run ahot water recirculationline

The Einstein circulator replaces the Taco oo7 oo7e 0015 0015e3 1816e 0018e, VR1816, VT2218 Grundfos 15-42, 15-58, Alpha I & II and others with one single model.

Max GPM Flow: 12gpm Max Head Feet: 18ft Material: Cast Iron Connection Type: 4_Bolt_Flange Pump Speed: Single Speed AM8-F1 Instruction SheetSubmittal Data SheetCurvesBrochure AM8 Cast Iron 4 bolt Flange

AM55-SFVL Stainless Steel Circulator has an Amp draw of only 0.07 to 0.57 amps, and watt consumption of just 5-38 watts the Einstein is the most energy efficient ECM on the market. This pump features 3 fixed speeds, 4 variable speeds and a night set back to maximize energy savings. It has a universal 4-bolt flange design reduces inventory and cost while simplifying installation.

Max GPM Flow: 11gpm Max Head Feet: 8ft Material: Stainless Steel Connection Type: NPT Pump Speed: Single Speed AM6-ST1 Instruction SheetSubmittal Data SheetCurvesBrochure With  an Amp draw of only 0.54 amps the AM6 offers high performance and high efficiency. The ST1 features internally threaded NPT connections, but other models are available with sweat fittings. All stainless steel models are fully lead free. Our AM6 circulator replaces Taco 006 models and other model circulators.

Max GPM Flow: 31gpm Max Head Feet: 12ft Material: Stainless Steel Connection Type: Flange, 4_Bolt_Flange Pump Speed: Three Speed AM10-S3F1 Instruction SheetSubmittal Data SheetCurvesBrochure With Amp draws ranging from 0.45 amps to 0.75 amps the AM10 offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation. The AM10 circulator replaces Taco 0010 circulators and other circulator models.

The Einstein circulator replaces the Taco oo7 oo7e 0015 0015e3 1816e 0018e, VR1816, VT2218 Grundfos 15-42, 15-58, Alpha I & II and others with one single model.

On overnight winter treks, I always bring a pillowcase that I turn into a snow-melting device later at camp. Simply pack the pillowcase with snow and hang it off a branch near (not over) the campfire. A pot below can catch the dripping water. It normally takes about 30 minutes to fill a quart of water this way so we keep the device going during our evening fire. One woodsman from Michigan I know prefers using a mosquito headnet instead of a pillowcase as his snowmelting device. Just be cautious not to get the headnet, which is made of nylon, too close to the fire or it will melt. You can also hang socks or a bandanna by the fire.

SO75S Submittal Data Sheet 3/4″ Sweat Isolation (shut-off) Flanges:  Full Port Ball Valve with 360° Swivel Includes Two Flanges, Four Bolts, Four Nuts, and Two Gaskets. Forged brass body full port for water application 600 PSI Non-Shock WOG Allows draining of the non-pressure side of the valve when closed

Additional Under-sink bypass valve kits- up to 5 per pump. To be used with AMH1K-3UV AquaMotion , 70600 Nevercold, and FT1 APCOM.

Digital Timer with adjustable 7-day functions, as well as power failure protection that keeps its settings even after power outage or when unplugged

Max GPM Flow: 7gpm Max Head Feet: 4ft Material: Stainless Steel Connection Type: Union_Half, Union Check Valve: Yes Pump Speed: Single Speed AM3-SUCV1 Instruction SheetSubmittal Data SheetCurvesBrochure With  an Amp draw of only 0.46 amps the AM3 offers high performance and high efficiency. The SUCV1 features union connections with 1/2″ bronze sweat fittings. All stainless steel models are fully lead free. Circulator comes with BICV™ built in check valve. Our AM3 circulator replaces Taco 003 models and other model circulators.

AQUA-ON DEMAND™ for TANKLESS HEATER (N) NO TIMER- USE WITH ON DEMAND CONTROL– For up to 100 Ft. of total pipe length and tankless minimum Flow Rate of .4 GPM or less AM7-SUEV1L Stainless Union circulator, Built-In check valve, 1” union with ¾” extended tailpieces with flat for mounting,with 10 ft. line cord, includes the AMK-ODR valve kit with Bypass valve on/off 95°-104°F, hose, Tee. The ODR valve installs on the cold angle stop. AMK-WB On Demand Remote RF Wireless Control with Adjustable Receiver and Cord. -No Wiring Required, up to 5 AMK-WB or AMK-MS or AMK-WS or mixed per Receiver

Max GPM Flow: 31gpm Max Head Feet: 12ft Material: Stainless Steel Connection Type: 4_Bolt_Flange Pump Speed: Single Speed AM10-SF1 Instruction SheetSubmittal Data SheetCurvesBrochure AM10 Stainless 4 Bolt Flange

For TANKLESS HEATER WITHOUT BUILT-IN PUMP for Single Pipe Systems AM6 AquaMotion Stainless Steel Circulator with a built-in timer and a 10 Ft line cord. AMK-ODR bypass valve kit (ODR Valve, 2 Ft. Stainless Steel Hose & Tee), Bypass Tee 3/4” MNPT x 3/4” MNPT x 3/8” OD Compression Two 3/4″ NPT Male Tail Pieces with 1” Union Nuts and Gaskets, 2 Ft. Stainless Hose.The AquaMotion ODR Valve is a small, quiet, lead free stainless/brass hot water recirculation valve for single pipe systems.  It installs at the fixture furthest from the tankless hot water heater. It acts in conjunction with the circulator to supply hot water using the Built-in Timer. The ODR Valve mounts below the fixture between hot and cold supply lines. When hot water is called with the Built-in Timer, the circulator forces the cooled hot water in the hot water line into the cold supply line which returns it to the hot water heater. As hotter water reaches the ODR Valve it closes until a 95°F temperature is reached at which point the valve automatically adjusts to maintain this temperature.

The AquaMotion ODR Valve is a small, quiet, lead free stainless/brass hot water recirculation valve for single pipe systems.  It installs at the fixture furthest from the tankless hot water heater. It acts in conjunction with a circulator to supply hot water ON DEMAND or Built-in Timer on pump. The ODR Valve mounts below the fixture between hot and cold supply lines. When hot water is called for using an On-Call control or Built-in Timer, the circulator forces the cooled hot water in the hot water line into the cold supply line which returns it to the hot water heater. As hotter water reaches the ODR Valve it closes until a 95°F temperature is reached at which point the valve automatically adjusts to maintain this temperature. A Hot Water Circulator must be installed at the tankless.

Type of Hot Water Heater: Tankless Outdoor Type of Household Plumbing: Single_Pipe Material: Stainless Steel Connection Type: 2_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH1K-RODRXT1 Instruction SheetSubmittal Data SheetBrochure AQUA-SHIELD™ AMH1K-RODRXT1 Single Pipe with On Demand AQUA-SHIELD™ Circulator for Outdoor installation. Installs on TANKLESS HEATER WITHOUT BUILT-IN PUMP FOR SINGLE PIPE INSTALLATION, USE WITH ON DEMAND- For up to 600 Ft. of total pipe length and tankless for all minimum flow rates. Stainless high speed circulator, flanged, 10 ft. line cord, with outdoor enclosure, for water, sprinkler, bug and anti-tampering locking device tab. Timer set to “On” only. AMK-ODR bypass valve kit (maintains 95F degrees) installs under fixture, Includes AMK-WB ON DEMAND-FK75S 3/4″ Stainless Flanges Included. Patent pending. – . Meets CA Title 24 with On Demand. Freeze protection does not work with this model because of the On Demand Kit. Aqua-Shield Outdoor Tankless Single Pipe for up to 600 ft. of total pipe with On Demand

On short dayhikes, I bring along a Nalgene water bottle that is covered from top to bottom with black duct tape to provide me with a passive solar snow-melting device. I have another (lightweight “whiskey” flask) bottle that has a 3’ loop of webbing taped on so I can wear it around my neck and inside my parka where my bodyheat converts the snow into water while I hike.

With an Amp draw of just 0.60 amps the AM7 offers high performance and high efficiency. The AM7 operates at 18% higher efficiency than leading competitors circulators. The AM7-FV1 uses standard 2-bolt circulator flanges for easy installation.

Max GPM Flow: 16gpm Max Head Feet: 11ft Material: Stainless Steel Connection Type: Flange, 2_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed AM7-SFV1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of just 0.60 amps the AM7 offers high performance and high efficiency. The AM7 operates at 18% higher efficiency than leading competitors circulators. The AM7-SF1 uses standard 2-bolt circulator flanges for easy installation. Circulator comes with BICV™ built in check valve. Our AM7-S circulator replaces Taco 007 and other model circulators.

Type of Hot Water Heater: Tankless Indoor Type of Household Plumbing: Single_Pipe Material: Stainless Steel Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH1K-6ODRZT1 Instruction SheetSubmittal Data SheetBrochure For TANKLESS HEATER WITHOUT BUILT-IN PUMP for Single Pipe Systems AM6 AquaMotion Stainless Steel Circulator with a built-in timer and a 10 Ft line cord. AMK-ODR bypass valve kit (ODR Valve, 2 Ft. Stainless Steel Hose & Tee), Bypass Tee 3/4” MNPT x 3/4” MNPT x 3/8” OD Compression Two 3/4″ NPT Male Tail Pieces with 1” Union Nuts and Gaskets, 2 Ft. Stainless Hose.The AquaMotion ODR Valve is a small, quiet, lead free stainless/brass hot water recirculation valve for single pipe systems.  It installs at the fixture furthest from the tankless hot water heater. It acts in conjunction with the circulator to supply hot water using the Built-in Timer. The ODR Valve mounts below the fixture between hot and cold supply lines. When hot water is called with the Built-in Timer, the circulator forces the cooled hot water in the hot water line into the cold supply line which returns it to the hot water heater. As hotter water reaches the ODR Valve it closes until a 95°F temperature is reached at which point the valve automatically adjusts to maintain this temperature. New video here!

AMH2K-7 is designed for dedicated return line systems with standard water heater. Good for up to 250 feet of total pipe length.

AMK-T Instruction Sheet Digital Timer with adjustable 7-day functions, as well as power failure protection that keeps its settings even after power outage or when unplugged

The assembly shall meet the requirements of: USC; ASSE Std. 1013; AWWA Std. C511-92; CSA B64.4. Shall be a Watts Series 009. Materials: Bronze body construction ...

Type of Hot Water Heater: Tank Type of Household Plumbing: Single_Pipe Material: Stainless Steel Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH3K-7N Instruction SheetSubmittal Data SheetBrochure AMH3K-7N is designed for standard plumbing systems with hot water pipe length up to 250ft of total pipe length for hot water tanks Fully automatic system installs under sink Requires electrical outlet at sink No cutting of pipe Uses Built-In non-adjustable Aquastat (On at 85F/ Off at 105F degrees) Add On Demand Kit (5 Minute Run Timer) to turn On Meets Title 24 California

Check Valve: Yes Aqua-Max™ APB30 Pressure Booster Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Max™ APB30 boosts domestic water pressure in residential homes by 30 psi to all fixtures and sprinkler heads. Use it where the city/ town/ well water delivers insufficient pressure. Automatically Starts when water is drawn & stops when demand ends, No Short Cycling increases pressure after water demands ends, Simple Installation plumbs into incoming water line & plugs into 115V wall fixture, Compact Design easy installation 14″ x 14″ x 11″, Quiet Operation totally enclosed  fan cooled motor, Stainless Steel Pump Construction for corrosion resistance & reliability, Composite Control with reinforced brass connections, Built in check valve eliminates back flow of cold to main, Mounting Base can be attached to floor or wall, Wash down Enclosures control and motor are sealed to prevent water entry, Drain and Fill Plugs for quick filling and venting. 1/2 hp and 3.3 Amps

AMH2K-7N is designed for dedicated return line systems with standard water heater. Good for up to 250 feet of pipe length.

Max GPM Flow: 29gpm Max Head Feet: 12ft Material: Stainless Steel Connection Type: Flange, 4_Bolt_Flange Check Valve: Yes Pump Speed: Three Speed AM10-S3FV1 Instruction SheetSubmittal Data SheetCurvesBrochure With Amp draws ranging from 0.45 amps to 0.75 amps the AM10 offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation. Circulator comes with BICV™ built in check valve. The AM10 circulator replaces Taco 0010 circulators and other circulator models.

If you are going to melt snow in your cooking pot over the fire or campstove, be sure to add a little water first unless you like the taste of burnt snow.

Max GPM Flow: 11gpm Max Head Feet: 8ft Material: Stainless Steel Connection Type: Union_Three_Quarter: Union 3/4" Sweat Check Valve: Yes Pump Speed: Single Speed Corded: Yes AM6-SUEV1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ Stainless AM6 with 3/4″ Union Sweat Fittings, BICV, Line Cord and Timer.

AMK-CB Instruction Sheet On-Demand Air Actuated Counter Control Kit – Wireless Button and Receiver (Button available separately AMK-CBW) For use with the AMH3K-7, AMH3K-7N, AMH3K-R & AMH3K-RN Under sink recirculation kits.

Spirax Sarco US Pressure Reducing & Surplussing Valves can reduce or maintain steam pressure accurately, reliably & economically for the application.

Max GPM Flow: 18gpm Max Head Feet: 9ft Material: Cast Iron Connection Type: Flange, 2_Bolt_Flange Pump Speed: Single Speed AM5-F1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of just 0.54 amps the AM5 offers high performance and high efficiency. Our AM5 circulator replaces Taco 005, Grundfos, Xylem and Armstrong Pumps per Cross Reference Chart.

Type of Hot Water Heater: Tank Type of Household Plumbing: Single_Pipe Max GPM Flow: 11gpm Max Head Feet: 8ft Material: Stainless Steel Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH1K-3UV Instruction SheetBrochure AQUA-FLASH® Recirculation Kit for hot water tanks with single pipe: AMH1K-3UV Kit includes: Stainless pump with 3/4″ FNPT union, built-in timer, 10 ft. line cord, bronze by-pass valve (with check valve), 2 ft. NSF hose & Tee Delivers Instant Hot Water Comfort in a Flash to Every Tap on the same line.  No electrical connection required under sink. Ideal for pedestal sink installations Built-in Mechanical Timer New Video Here!

Max GPM Flow: 18gpm Max Head Feet: 11ft Material: Stainless Steel Connection Type: Union_Half Check Valve: Yes Pump Speed: Single Speed Corded: Yes AM7-SUCV1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ AM7 Stainless with 1/2″ Union Sweat Fittings, BICV, line cord and timer.

Max GPM Flow: 20gpm Max Head Feet: 21ft Material: Stainless Steel Connection Type: Flange, 4_Bolt_Flange Check Valve: Yes Pump Speed: Variable Speed Corded: Yes AM55-SFVL Instruction SheetSubmittal Data SheetBrochure AM55-SFVL Stainless Steel Circulator has an Amp draw of only 0.07 to 0.57 amps, and watt consumption of just 5-38 watts the Einstein is the most energy efficient ECM on the market. This pump features 3 fixed speeds, 4 variable speeds and a night set back to maximize energy savings. It has a universal 4-bolt flange design reduces inventory and cost while simplifying installation. Circulator comes with BICV™ built in check valve. The Einstein circulator replaces the Taco oo7 oo7e 0015 0015e3 1816e 0018e, VR1816, VT2218 Grundfos 15-42, 15-58, Alpha I & II and others with one single model.

With Amp draws ranging from 0.45 amps to 0.75 amps the AM10 offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation.

Max GPM Flow: 20gpm Max Head Feet: 11ft Material: Cast Iron Connection Type: Flange, 2_Bolt_Flange Pump Speed: Single Speed AM7-F1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of just 0.60 amps the AM7 offers high performance and high efficiency. The AM7 operates at 18% higher efficiency than leading competitors circulators. The AM7-F1 uses standard 2-bolt circulator flanges for easy installation. Our AM7 circulator replaces Taco 007 and other model circulators.

Max GPM Flow: 20gpm Max Head Feet: 11ft Material: Stainless Steel Connection Type: Flange, 2_Bolt_Flange Pump Speed: Single Speed AM7-SF1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of just 0.60 amps the AM7 offers high performance and high efficiency. The AM7 operates at 18% higher efficiency than leading competitors circulators. The AM7-SF1 uses standard 2-bolt circulator flanges for easy installation. Our AM7 circulator replaces Taco 007 and other model circulators.

Max GPM Flow: 7gpm Max Head Feet: 4ft Material: Stainless Steel Connection Type: Union_Three_Quarter: Union 3/4" Sweat Check Valve: Yes Pump Speed: Single Speed Corded: Yes AM3-SUEV1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ Stainless AM3 with 3/4″ Union Sweat Fittings, BICV, Line Cord and Timer

Max GPM Flow: 29gpm Max Head Feet: 11ft Material: Stainless Steel Connection Type: 4_Bolt_Flange Check Valve: Yes Pump Speed: Three Speed Corded: Yes AM10-S3FV1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ Stainless AM10 4 Bolt flanged 3 Speed with BICV, line cord and timer.

AMR-SF3, TwinTurbo Stainless Steel, HeadFt:41 GPM:17 AMR-SFV3, TwinTurbo Stainless Steel with check valve, HeadFt:41 GPM:16

Max GPM Flow: 31gpm Max Head Feet: 12ft Material: Cast Iron Connection Type: 4_Bolt_Flange Pump Speed: Single Speed AM10-F1 Instruction SheetSubmittal Data SheetCurvesBrochure AM10 Cast Iron 4 bolt Flange

Type of Hot Water Heater: Tankless Indoor Type of Household Plumbing: Single_Pipe Material: Stainless Steel Check Valve: Yes Pump Speed: Three Speed Corded: Yes AMH3K-R Instruction SheetSubmittal Data SheetBrochure AMH3K-R is designed for standard plumbing systems up to 600ft of total pipe length. Fully automatic system installs under sink Rubber mount Requires electrical outlet at sink Uses Built-In non-adjustable Aquastat (On at 85F/ Off at 105F degrees) Built-in Mechanical Timer Meets Title 24 California

Hot Water with Recirculation Systems: The Comfort and Savings of Instant Hot Water with Recirculation The Innovation Leader in Hot Water Recirculation Technology Hot Water Recirculation Systems: For Retrofit & New Construction The Problem How long do you wait for hot water when you turn on the faucet? 30 seconds, 1 minute, 2 or 3 minutes, longer? While you wait, a home with 5 taps can waste up to 15,000 gallons of tempered water down the drain. You pay for this potable water, wasted energy and sewage fees. The Solution Install a proven, awarded AquaMotion recirculation system. One system is available for every type of installation, hot water tanks or tankless. The Benefits Hot Water Comfort at Every FaucetSave Time, No More Waiting For Hot WaterSave Hot Water, 12,000 – 15,000 Gallons a YearSave Energy with Timer, Save on Utility and Sewer BillsSave More with “ON DEMAND” SystemsGo Green, Help Conserve this Precious Water ResourceMeet local Plumbing Codes The Cost To run the circulator with timer at $0.12 per kw is approx. $3.00, $8.00 for the large pump annually. Our hot water recirculation kits have an approx. one to three year payback depending on the size of the installation. How Does It Work? A pump at the tank or tankless heater, or installed under the sink, forces the lukewarm water from the hot supply line into the cold supply line. If a dedicated return line is used it returns the lukewarm water to the heater. A sensor/switch (Aquastat) built into the pump or an Aqua-Flash® or ODR Superflow™ By-pass valve transfers the lukewarm water into the cold pipe. The valves maintain average 93° F (34° C) at the sink. The under sink pump starts when temperature drops to 85° F (30° C) and stops when it reaches 104° F (40° C). The pump runs about 3 times an hour for 2 minutes. A built-in 24-hour mechanical timer allows the user to set the time when he wants instant hot water. An ON DEMAND button/motion sensor or app can also activate the system US Patents, RTM, 9,864,647, D834, 145, 8,083,500, 8,303, 184, 9,328,736, 10,612, 793, 5,501,838, 4,507,949, 11,193,605. Canadian Patents 2,883,495 & 2,935,949 Hot Water Recirculation Systems for Any Hot Water Heating System. See Our Recirculation System Kits See Our Recirculation System Accessories Below

... FEBCO 2 1/2-10" 860,. Relief Valve Internal Module. 905-192. List Price: $391.86. Add To Cart · Febco Backflow Prevention Disc Assembly - 8-10" 860, 8" 880/.

With Amp draws ranging from 0.46 amps to 0.79 amps the AMR offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation.

Type of Hot Water Heater: Tank Type of Household Plumbing: Dedicated_Return Material: Stainless Steel Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH2K-7N Instruction SheetSubmittal Data SheetBrochure AMH2K-7N is designed for dedicated return line systems with standard water heater. Good for up to 250 feet of pipe length.  Built-in Aquastat that senses water temperature (On at 85F/ Off at 105F degrees) to minimize run time. Save up to 15,000 gallons of water per year for a family of 5 Kits include 1 AM7-SUVA1L1 pump, 10 foot cord,  (2) 3/4″ NPT male Union Tail Pieces, (2) Union Nuts, (2) Union Gaskets Add On Demand (5 Minute Run time) to turn On. Meets Title 24 California

Hot water recirculationline diagram

Aqua-Ready™ With  an Amp draw of only 0.46 amps the AM3  3/4″ NPT offers high performance and high efficiency. All stainless steel models are fully lead free.

To run the circulator with timer at $0.12 per kw is approx. $3.00, $8.00 for the large pump annually. Our hot water recirculation kits have an approx. one to three year payback depending on the size of the installation.

AM55-FVL Cast Iron Circulator has  an Amp draw of only 0.07 to 0.57 amps, and watt consumption of just 5-38 watts the Einstein is the most energy efficient ECM on the market. This pump features 3 fixed speeds, 4 variable speeds and a night set back to maximize energy savings. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation. * Use an iron filter when installing circulator in existing systems to avoid problems with iron oxides.

FK75 Submittal Data Sheet 3/4″ NPT, Includes Two Cast Iron Flanges, Four Bolts, Four Nuts, Two Square Gaskets. Flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench Fits AquaMotion models AM5, AM7, AMR, AM10

FK150S Submittal Data Sheet 1-1/2″ NPT, Includes Two Stainless Steel Flanges, Four Bolts, Four Nuts, Two Square Gaskets. Flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench Fits AquaMotion models AM5, AM7, AMR, AM10

Hot waterrecirculating pump installation diagram

Type of Hot Water Heater: Tankless Indoor Type of Household Plumbing: Dedicated_Return Material: Stainless Steel Check Valve: Yes Pump Speed: Three Speed Corded: Yes AMH2K-RN Instruction SheetSubmittal Data SheetBrochure AMH2K-RN is designed for dedicated return line systems with tankless water heater up to 600 feet of total pipe length. Installs near heat source on Return Line Uses Built-In non-adjustable Aquastat (On at 85F/ Off at 105F degrees) Add On Demand Kit (5 Minute Run Time) to turn On Meets Title 24 California

FK150 Submittal Data Sheet 1-1/2″ NPT, Includes Two Cast Iron Flanges, Four Bolts, Four Nuts, Two Square Gaskets. Flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench Fits AquaMotion models AM5, AM7, AMR, AM10

Type of Hot Water Heater: Tank Type of Household Plumbing: Single_Pipe Material: Stainless Steel Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH3K-7 Instruction SheetSubmittal Data SheetBrochure AMH3K-7 is designed for standard plumbing systems with hot water pipe length up to 250ft of total pipe length for hot water tanks Fully automatic system installs under sink Requires electrical outlet at sink No cutting of pipe Built-in Mechanical Timer Uses Built-In Non-Adjustable Aquastat (On at 85F/ Off at 105F degrees) Meets Title 24 California New Installation Video Here- Please note the red tailpiece is installed on the left side for Hot.

Max GPM Flow: 18gpm Max Head Feet: 9ft Material: Stainless Steel Connection Type: Flange, 2_Bolt_Flange Pump Speed: Single Speed AM5-SF1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of just 0.54 amps the AM5 offers high performance and high efficiency. The AM5-SF1 uses standard 2-bolt circulator flanges for easy installation. Our AM5 circulator replaces Taco 005 and other model circulators.

Max GPM Flow: 5gpm Max Head Feet: 10ft Material: Stainless Steel Connection Type: NPT Pump Speed: Single Speed AM1-ST1 Instruction SheetSubmittal Data SheetCurvesBrochure AM1 Stainless 3/4″ NPT (Replaces AM2)

Type of Hot Water Heater: Tank Type of Household Plumbing: Dedicated_Return Material: Stainless Steel Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH2K-7 Instruction SheetSubmittal Data SheetBrochure AMH2K-7 is designed for dedicated return line systems with standard water heater. Good for up to 250 feet of total pipe length.  Built-in Aquastat that senses water temperature (On at 85F/ Off at 105F degrees) to minimize run time. Save up to 15,000 gallons of water per year for a family of 5 Kits include 1 AM7-SUVA1LT1 pump, 10 foot cord, (2) 3/4″ NPT male Union Tail Pieces, (2) Union Nuts, (2) Union Gaskets Built-in Mechanical Timer Meets Title 24 California

The AquaMotion ODR Valve is a small, quiet, lead free stainless/brass hot water recirculation valve for single pipe systems.  It installs at the fixture furthest from the tankless hot water heater. The ODR Valve mounts below the fixture between hot and cold supply lines. When hot water is called with the Built-in Timer, the circulator forces the cooled hot water in the hot water line into the cold supply line which returns it to the hot water heater. As hotter water reaches the ODR Valve it closes until a 95°F temperature is reached at which point the valve automatically adjusts to maintain this temperature.

Max GPM Flow: 11gpm Max Head Feet: 18ft Material: Cast Iron Connection Type: 4_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed AM8-FV1 Instruction SheetSubmittal Data SheetCurvesBrochure AM8 Cast Iron 4 bolt Flange with built-in check valve

New perk: Easily find new routes and hidden gems, upcoming running events, and more near you. Your weekly Local Running Newsletter has everything you need to lace up! Subscribe today →.

AMK-WB Instruction Sheet On-Demand Wireless Control Kit – Wireless Button and Receiver (Button available separately AMK-WBR)

Install a proven, awarded AquaMotion recirculation system. One system is available for every type of installation, hot water tanks or tankless.

AQUA-ON DEMAND™ for TANKLESS HEATER WITHOUT BUILT-IN PUMP WITH SINGLE PIPE FOR UP TO 600 FT. OF TOTAL PIPE LENGTH- (N) NO TIMER- INCLUDES AMK-WB ON DEMAND  AMR-SFVL1 flanged stainless high speed circulator with 10 ft. line cord, ¾” stainless  Female NPT flange kit, AMK-WB On Demand Push Button with Receiver,  Includes the AMK-ODR valve kit with valve, hose, Tee. Valve maintains 95°F

With  an Amp draw of only 0.46 amps the AM3 offers high performance and high efficiency. The SUCV1 features union connections with 1/2″ bronze sweat fittings. All stainless steel models are fully lead free.

Max GPM Flow: 17gpm Max Head Feet: 21ft Material: Stainless Steel Connection Type: Flange, 4_Bolt_Flange Pump Speed: Three Speed AMR-S3F1 Instruction SheetSubmittal Data SheetCurvesBrochure With Amp draws ranging from 0.46 amps to 0.79 amps the AMR offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation. The AMR circulator replaces Grundfos model UPS15-58, Taco 00R, Taco 0015, and Wilo STAR S21 and other model circulators.

Max GPM Flow: 17gpm Max Head Feet: 21ft Material: Cast Iron Connection Type: Flange, 4_Bolt_Flange Pump Speed: Three Speed AMR-3F1 Instruction SheetSubmittal Data SheetCurvesBrochure With Amp draws ranging from 0.46 amps to 0.79 amps the AMR offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation. The AMR circulator replaces Grundfos model UPS15-58, Taco 00R, Taco 0015, and Wilo STAR S21 and other model circulators.

Type of Hot Water Heater: Tankless Outdoor Type of Household Plumbing: Single_Pipe Material: Stainless Steel Pump Speed: Single Speed Corded: Yes AMH1K-7ODRXT1 Instruction SheetSubmittal Data SheetBrochure AQUA-SHIELD™ Circulator for Outdoor installation. Installs on TANKLESS HEATER WITHOUT BUILT-IN PUMP FOR SINGLE PIPE INSTALLATION, For up to 250 Ft. of total pipe length and tankless Flow requirement of .4 GPM or less, Stainless single speed circulator with union connections, 10 ft. line cord, with outdoor enclosure, water, sprinkler, bug and anti-tampering locking device tab. Timer set to “On” only. AMK-ODR bypass valve kit (maintains 95 F  degrees) installs under fixture, Includes AMK-WB On Demand- UK75T 3/4″ Threaded Male Fittings Included -Meets CA Title 24 with On Demand. Patent pending. Freeze protection does not work with this model because on the On Demand Kit.

With  an Amp draw of only 0.46 amps the AM3 offers high performance and high efficiency. The ST1 features internally threaded NPT connections, but other models are available with sweat fittings. All stainless steel models are fully lead free.

How long do you wait for hot water when you turn on the faucet? 30 seconds, 1 minute, 2 or 3 minutes, longer? While you wait, a home with 5 taps can waste up to 15,000 gallons of tempered water down the drain. You pay for this potable water, wasted energy and sewage fees.

Type of Hot Water Heater: Tankless Indoor Type of Household Plumbing: Single_Pipe Max GPM Flow: 16gpm Max Head Feet: 20ft Material: Stainless Steel Connection Type: 4_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH1K-RODRN Instruction SheetBrochure AQUA-ON DEMAND™ for TANKLESS HEATER WITHOUT BUILT-IN PUMP WITH SINGLE PIPE FOR UP TO 600 FT. OF TOTAL PIPE LENGTH- (N) NO TIMER- INCLUDES AMK-WB ON DEMAND  AMR-SFVL1 flanged stainless high speed circulator with 10 ft. line cord, ¾” stainless  Female NPT flange kit, AMK-WB On Demand Push Button with Receiver,  Includes the AMK-ODR valve kit with valve, hose, Tee. Valve maintains 95°F The AquaMotion ODR Valve is a small, quiet, lead free stainless/brass hot water recirculation valve for single pipe systems.  It installs at the fixture furthest from the tankless hot water heater. The ODR Valve mounts below the fixture between hot and cold supply lines. When hot water is called with the Built-in Timer, the circulator forces the cooled hot water in the hot water line into the cold supply line which returns it to the hot water heater. As hotter water reaches the ODR Valve it closes until a 95°F temperature is reached at which point the valve automatically adjusts to maintain this temperature. Meets Title 24 California

With Amp draws ranging from 0.46 amps to 0.79 amps the AMR offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation.

FK125S Submittal Data Sheet 1-1/4″ NPT, Includes Two Stainless Steel Flanges, Four Bolts, Four Nuts, Two Square Gaskets. Flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench Fits AquaMotion models AM5, AM7, AMR, AM10

The AMRe replaces the Taco oo7 oo7e 0015 0015e 1816e 0018e, Grundfos 15-42, 15-58, Alpha I & II and others with one single model.

With  an Amp draw of only 0.54 amps the AM6 offers high performance and high efficiency. The ST1 features internally threaded NPT connections, but other models are available with sweat fittings. All stainless steel models are fully lead free.

Hot water recirculationvalve

It is installed immediately downstream of the residential water meter, in a vertical or horizontal position. Check with local inspection authorities for ...

Type of Hot Water Heater: Tankless Indoor Type of Household Plumbing: Single_Pipe Material: Stainless Steel Check Valve: Yes Pump Speed: Three Speed Corded: Yes AMH3K-RN Instruction SheetSubmittal Data SheetBrochure AMH3K-RN is designed for standard plumbing systems with hot water pipe length up to 600ft of total pipe length. Fully automatic system installs under sink Rubber mount Requires electrical outlet at sink Uses Built-In non-adjustable Aquastat (On at 85F/ Off at 105F degrees) Add On Demand Kit (5 Minute Run Time) To Turn On Meets Title 24 California

Max GPM Flow: 16gpm Max Head Feet: 21ft Material: Stainless Steel Connection Type: 4_Bolt_Flange Check Valve: Yes Pump Speed: Three Speed Corded: Yes AMR-S3FV1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ AMR Stainless 4 bolt flanged 3 Speed pump with BICV, line cord and timer.

Backflow prevention systems are devices installed onto a pipe that only allow water to flow in one direction.

Max GPM Flow: 16gpm Max Head Feet: 9ft Material: Stainless Steel Connection Type: Flange, 2_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed AM5-SFV1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of just 0.54 amps the AM5 offers high performance and high efficiency. The AM5-SF1 uses standard 2-bolt circulator flanges for easy installation. Circulator comes with BICV™ built in check valve. Our AM5 circulator replaces Taco 005 and other model circulators.

Max GPM Flow: 16gpm Max Head Feet: 9ft Material: Cast Iron Connection Type: Flange, 2_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed AM5-FV1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of just 0.54 amps the AM5 offers high performance and high efficiency. Circulator comes with BICV™ built in check valve. Our AM5 circulator replaces Taco 005 and other model circulators.

MUE758-2,17.0000,DISNEY McLANE (WATTS),MUE;,758 CI STRAINER 2 FLG 304SS PERF,HVAC Discounters. ... Mueller Steam. Supplier Part #: 17.0000. $142.52. 1 In Stock*.

Material: Cast Iron Connection Type: Flange Check Valve: Yes Pump Speed: Single Speed TwinTurbo Instruction SheetSubmittal Data SheetBrochure TwinTurbo Cast Iron or Stainless Steel: 2 AMR  or 2 AM10 Pumps wired together set on medium or high speed. Benefits and features: More competitively priced than Higher horsepower single pumps with similar performance Two pumps in series doubles the pressure output of a single pump Pre-wired in series, installation wiring is the same as a single unit Duel pumps allow one to be operated alone or both together On solar drain back systems, both pumps can be used to fill the system and one turned off during operation. Four bolt flange pattern, 12 1/2” flange to flange dimensions for easy installation in new or existing installations Available with or without built in Check Valve (add “V” to part number, i.e. AMR-FV3) Available in Cast Iron and Stainless Steel Construction AMR-F3, TwinTurbo Cast Iron, HeadFt:41 GPM:17 AMR-FV3, TwinTurbo Cast Iron with check valve, HeadFt:41 GPM:16 AMR-F2, TwinTurbo Cast Iron, HeadFt:36 GPM:14 AMR-FV2, TwinTurbo Cast Iron with check valve, HeadFt:36 GPM:13 AM10-F3, TwinTurbo Cast Iron HeadFt:24 GPM:29 AM10-FV3, TwinTurbo Cast Iron with check valve HeadFt:24 GPM:28 AM10-F2, TwinTurbo Cast Iron, HeadFt:21 GPM:24 AM10-FV2, TwinTurbo Cast Iron with check valve, HeadFt:21 GPM:23

Max GPM Flow: 11gpm Max Head Feet: 8ft Connection Type: NPT Pump Speed: Single Speed AM6-ST1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ Stainless AM6 with 3/4″ NPT includes Line Cord and Timer.

AM10-SF2, TwinTurbo Stainless Steel, HeadFt:21 GPM:24 AM10-SFV2, TwinTurbo Stainless Steel with check valve, HeadFt:21 GPM:23

Max GPM Flow: 29gpm Max Head Feet: 11ft Material: Cast Iron Connection Type: 4_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed AM10-FV1 Instruction SheetSubmittal Data SheetCurvesBrochure AM10 Cast Iron 4 bolt Flange with built-in check valve

Hot water recirculationproblems

Material: Stainless Steel Connection Type: NPT Pump Speed: Single Speed AM7-ST1 Instruction SheetSubmittal Data SheetCurvesBrochure AM7 Stainless with 3/4″ NPT 11×14 GPM

With  an Amp draw of only 0.54 amps the AM6 offers high performance and high efficiency. The SUEV1 features union connections with 3/4″ bronze sweat fittings. All stainless steel models are fully lead free.

Type of Hot Water Heater: Tankless Outdoor Type of Household Plumbing: Single_Pipe Material: Stainless Steel Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH1K-7ODRXZT1 Instruction SheetSubmittal Data SheetBrochure AQUA-SHIELD™ AMH1K-7ODRXZT1- Single Pipe Aqua-Shield™ Circulator for Outdoor Installation. Installs on Tankless Heater without built-in pump for Single Pipe Installation. For up to 250 ft. of total pipe length and tankless Flow requirement of .4 GPM or less AM7-SU1LXZT1 Stainless Union Circulator with 3/4″ Male Tailpieces, with outdoor enclosure, water, sprinkler, bug, freeze protected, anti-tampering locking device tab, built-in timer, 10 ft. line cord, pump bypass connection, check, flow control, hose, bypass Tee 3/4″ FNPT x 3/4″ MNPT x 3/8″ OD Compression. AMK-ODR bypass valve kit: Bypass valve, hose, Tee. Valve maintains 95° F. Installs under sink on the cold angle stop and no power required under sink. Patented.

Max GPM Flow: 7gpm Max Head Feet: 4ft Material: Stainless Steel Connection Type: NPT Pump Speed: Single Speed AM3-ST1 Instruction SheetSubmittal Data SheetCurvesBrochure With  an Amp draw of only 0.46 amps the AM3 offers high performance and high efficiency. The ST1 features internally threaded NPT connections, but other models are available with sweat fittings. All stainless steel models are fully lead free. Our AM3 circulator replaces Taco 003 models and other model circulators.

Max GPM Flow: 16gpm Max Head Feet: 21ft Material: Stainless Steel Connection Type: 4_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMR-SFVL Submittal Data SheetBrochure Stainless AMR Set on High Speed with Check Valve and Line Cord

SO125S Submittal Data Sheet 1-1/4″ Sweat Isolation (shut-off) Flanges:  Full Port Ball Valve with 360° Swivel Includes Two Flanges, Four Bolts, Four Nuts, and Two Gaskets. Forged brass body full port for water application 600 PSI Non-Shock WOG Allows draining of the non-pressure side of the valve when closed

AQUA-SHIELD™ Circulator for Outdoor installation. Installs on TANKLESS HEATER WITHOUT BUILT-IN PUMP FOR SINGLE PIPE INSTALLATION, For up to 250 Ft. of total pipe length and tankless Flow requirement of .4 GPM or less, Stainless single speed circulator with union connections, 10 ft. line cord, with outdoor enclosure, water, sprinkler, bug and anti-tampering locking device tab. Timer set to “On” only. AMK-ODR bypass valve kit (maintains 95 F  degrees) installs under fixture, Includes AMK-WB On Demand- UK75T 3/4″ Threaded Male Fittings Included -Meets CA Title 24 with On Demand. Patent pending. Freeze protection does not work with this model because on the On Demand Kit.

Connection Type: Union_Half, Union UK50 Sweat Union Kit for Stainless Union Pumps Instruction SheetSubmittal Data SheetCurvesBrochure Two Unions with two 1/2″ Sweat Tail Pieces, Gaskets

Max GPM Flow: 7gpm Max Head Feet: 4ft Material: Stainless Steel Connection Type: Union_Three_Quarter: Union 3/4" Sweat Check Valve: Yes Pump Speed: Single Speed AM3-SUEV1 Instruction SheetSubmittal Data SheetCurvesBrochure With  an Amp draw of only 0.46 amps the AM3 offers high performance and high efficiency. The SUEV1 features union connections with 3/4″ bronze sweat fittings. All stainless steel models are fully lead free. Circulator comes with BICV™ built in check valve. Our AM3 circulator replaces Taco 003 models and other model circulators.

FK75S Submittal Data Sheet 3/4″ NPT, Includes Two Stainless Steel Flanges, Four Bolts, Four Nuts, Two Square Gaskets. Flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench Fits AquaMotion models AM5, AM7, AMR, AM10

The new AMK-UK brass and stainless valve kit with bi-metal coil provides 90° F hot water to every faucet. It does not require power under the sink

Type of Hot Water Heater: Tankless Indoor Type of Household Plumbing: Single_Pipe Material: Stainless Steel Pump Speed: Single Speed Corded: Yes AMH1K-7ODRN Instruction SheetBrochure AQUA-ON DEMAND™ for TANKLESS HEATER (N) NO TIMER- USE WITH ON DEMAND CONTROL– For up to 100 Ft. of total pipe length and tankless minimum Flow Rate of .4 GPM or less AM7-SUEV1L Stainless Union circulator, Built-In check valve, 1” union with ¾” extended tailpieces with flat for mounting,with 10 ft. line cord, includes the AMK-ODR valve kit with Bypass valve on/off 95°-104°F, hose, Tee. The ODR valve installs on the cold angle stop. AMK-WB On Demand Remote RF Wireless Control with Adjustable Receiver and Cord. -No Wiring Required, up to 5 AMK-WB or AMK-MS or AMK-WS or mixed per Receiver Meets Title 24 California

Hot water recirculationpump

AMK-WS Instruction Sheet On-Demand Wireless Control Kit – Wall Switch and Receiver (Switch available separately AM-WSR)

Aqua-Max™ APB30 boosts domestic water pressure in residential homes by 30 psi to all fixtures and sprinkler heads. Use it where the city/ town/ well water delivers insufficient pressure. Automatically Starts when water is drawn & stops when demand ends, No Short Cycling increases pressure after water demands ends, Simple Installation plumbs into incoming water line & plugs into 115V wall fixture, Compact Design easy installation 14″ x 14″ x 11″, Quiet Operation totally enclosed  fan cooled motor, Stainless Steel Pump Construction for corrosion resistance & reliability, Composite Control with reinforced brass connections, Built in check valve eliminates back flow of cold to main, Mounting Base can be attached to floor or wall, Wash down Enclosures control and motor are sealed to prevent water entry, Drain and Fill Plugs for quick filling and venting. 1/2 hp and 3.3 Amps

Max GPM Flow: 11gpm Max Head Feet: 8ft Material: Stainless Steel Connection Type: Union_Three_Quarter: Union 3/4" Sweat, Union Check Valve: Yes Pump Speed: Single Speed AM6-SUEV1 Instruction SheetSubmittal Data SheetCurvesBrochure With  an Amp draw of only 0.54 amps the AM6 offers high performance and high efficiency. The SUEV1 features union connections with 3/4″ bronze sweat fittings. All stainless steel models are fully lead free. Circulator comes with BICV™ built in check valve. Our AM6 circulator replaces Taco 006 models and other model circulators.

AMK-ODR Valve Kit Instruction SheetSubmittal Data SheetBrochure   The AquaMotion ODR Valve is a small, quiet, lead free stainless/brass hot water recirculation valve for single pipe systems.  It installs at the fixture furthest from the tankless hot water heater. It acts in conjunction with a circulator to supply hot water ON DEMAND or Built-in Timer on pump. The ODR Valve mounts below the fixture between hot and cold supply lines. When hot water is called for using an On-Call control or Built-in Timer, the circulator forces the cooled hot water in the hot water line into the cold supply line which returns it to the hot water heater. As hotter water reaches the ODR Valve it closes until a 95°F temperature is reached at which point the valve automatically adjusts to maintain this temperature. A Hot Water Circulator must be installed at the tankless.

Max GPM Flow: 17gpm Max Head Feet: 11ft Material: Cast Iron Connection Type: Flange, 2_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed AM7-FV1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of just 0.60 amps the AM7 offers high performance and high efficiency. The AM7 operates at 18% higher efficiency than leading competitors circulators. The AM7-FV1 uses standard 2-bolt circulator flanges for easy installation. Circulator comes with BICV™ built in check valve. Our AM7 circulator replaces Taco 007 and other model circulators.

Kit includes: Stainless pump with 3/4″ FNPT union, built-in timer, 10 ft. line cord, bronze by-pass valve (with check valve), 2 ft. NSF hose & Tee

SO125T Submittal Data Sheet 1-1/4″ NPT Isolation (shut-off) Flanges:  Full Port Ball Valve with 360° Swivel Includes Two Flanges, Four Bolts, Four Nuts, and Two Gaskets. Forged brass body full port for water application 600 PSI Non-Shock WOG Allows draining of the non-pressure side of the valve when closed

Connection Type: Union_Three_Quarter: Union 3/4" Sweat, Union UK75 Sweat Union Kit for Stainless Union Pumps Instruction SheetSubmittal Data SheetCurvesBrochure   Two Unions with two  3/4″ Sweat Tail Pieces, Gaskets

CT07 Instruction Sheet Replacement cartridge for the AM7 circulator and the Taco 007 circulators. The CT07 replaces the Taco part RP007-042RP and 007-042 at 20-40% lower cost

SO75T Submittal Data Sheet 3/4″ NPT Isolation (shut-off) Flanges:  Full Port Ball Valve with 360° Swivel Includes Two Flanges, Four Bolts, Four Nuts, and Two Gaskets. Forged brass body full port for water application 600 PSI Non-Shock WOG Allows draining of the non-pressure side of the valve when closed

FK100 Submittal Data Sheet 1″ NPT, Includes Two Cast Iron Flanges, Four Bolts, Four Nuts, Two Square Gaskets. Flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench Fits AquaMotion models AM5, AM7, AMR, AM10

With an Amp draw of just 0.54 amps the AM5 offers high performance and high efficiency. The AM5-SF1 uses standard 2-bolt circulator flanges for easy installation.

Enjoy coverage of racing, history, food, culture, travel, and tech with access to unlimited digital content from Outside Network's iconic brands.

With an Amp draw of just 0.54 amps the AM5 offers high performance and high efficiency. The AM5-SF1 uses standard 2-bolt circulator flanges for easy installation.

FK125 Submittal Data Sheet 1-1/4″ NPT, Includes Two Cast Iron Flanges, Four Bolts, Four Nuts, Two Square Gaskets. Flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench Fits AquaMotion models AM5, AM7, AMR, AM10

Max GPM Flow: 11gpm Max Head Feet: 8ft Material: Stainless Steel Connection Type: Union_Half Pump Speed: Single Speed Corded: Yes AM6-SUCV1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ Stainless AM6 with 1/2″ Union Sweat Fittings, BICV, Line Cord and Timer.

AMH3K-7N is designed for standard plumbing systems with hot water pipe length up to 250ft of total pipe length for hot water tanks

With an Amp draw of just 0.60 amps the AM7 offers high performance and high efficiency. The AM7 operates at 18% higher efficiency than leading competitors circulators. The AM7-F1 uses standard 2-bolt circulator flanges for easy installation.

Max GPM Flow: 12gpm Max Head Feet: 18ft Material: Stainless Steel Connection Type: 4_Bolt_Flange Pump Speed: Single Speed AM8-SF1 Instruction SheetSubmittal Data SheetCurvesBrochure AM8 Stainless 4 bolt flange

AM10-SF3, TwinTurbo Stainless Steel HeadFt:24 GPM:29 AM10-SFV3, TwinTurbo Stainless Steel with check valve HeadFt:24 GPM:28

Max GPM Flow: 18gpm Max Head Feet: 11ft Material: Stainless Steel Connection Type: Union_Three_Quarter: Union 3/4" Sweat Check Valve: Yes Pump Speed: Single Speed Corded: Yes AM7-SUEV1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ AM7 Stainless with 3/4″ Union Sweat Fittings, BICV, line cord and timer.

Aqua-Shield™ Circulator for Outdoor Installation. Installs on Tankless Heater without built-in pump for Single Pipe Installation. For up to 250 ft. of total pipe length and tankless Flow requirement of .4 GPM or less

SO100T Submittal Data Sheet 1″ NPT Isolation (shut-off) Flanges:  Full Port Ball Valve with 360° Swivel Includes Two Flanges, Four Bolts, Four Nuts, and Two Gaskets. Forged brass body full port for water application 600 PSI Non-Shock WOG Allows draining of the non-pressure side of the valve when closed

The NEW AMRe-FVL High Efficiency ECM circulator  for heating with IRON GUARD™ is fully automatic, no buttons to push, steel circulator with stainless cartridge. Does not require iron filter in the system to protect the circulator. External iron filter cost as much as the pump. 6 1/2 ft. replaceable line cord included to save money an time on installation. High performance of 20 ft. x 18 GPM, 120/1/60, low 45 watt draw, universal 2 bolt flange with nut retainer, built-in check valve, replaceable cartridge, a green sustainable product.