Fort Worth, Texas, is one of the largest cities in the U.S., spanning 350 square miles of land, with a population of nearly 1 million. In fact, its fast population growth is putting a lot of pressure on the water supply, so much that the Tarrant Regional Water District (TRWD) is developing new wetlands to meet the anticipated demand for water.

Nitrate is a potential carcinogen that can be found in a wide variety of sources, including cured meats and even some vegetables. It ends up in the water supply through fertilizer runoff, discharges from septic tanks, and erosion of natural deposits.

Hard water isn’t a public health concern. It refers to a high concentration of minerals like calcium and magnesium, which aren’t toxic. But it can affect the taste of the water, and leave behind mineral residue on clothes, sinks, hair, and skin.

A:  Yes the SCV is an easy fit.  Just keep everything CLEAN CLEAN CLEAN. Please don’t fit the Suction Control Valve in a windy, dusty environment as dust will be in the air and will contaminate the SCV.  Put the vehicle in a garage and close the doors and windows to keep air flow to a minimum.

Although Fort Worth’s water meets the limit for total chromium, there’s no legal limit for chromium-6, and it exceeds the EWG’s recommendation by 2.7 times:

Ultraviolet (UV) filters are effective for killing microorganisms like salmonella, E. coli, and coliform bacteria, but this is unnecessary with Fort Worth’s drinking water.

Activated carbon filters have a dense, porous surface that can filter out chlorine and chloramines, volatile organic compounds, VOCs, and some forever chemicals. They don’t filter out fluoride, hard water minerals, or microbial contaminants.

First, the U.S. Environmental Protection Agency (EPA.gov) sets drinking water quality standards that apply to all American public water systems. These include maximum contaminant levels (MCLs) for specific contaminants, like lead and arsenic.

As for forever chemicals like PFAS and disinfection byproducts, that’s up to you. Fort Worth’s water quality meets the EPA’s guidelines for regulated contaminants, but you may prefer to take a more cautious approach and invest in a home water filter.

The EPA hasn’t yet set official guidelines for these chemicals, so concerned residents may want to invest in a home water filtration system that can filter out PFAS.

Haloacetic acids (HAA5) are another group of disinfection byproducts linked to cancer and harm to fetal growth. Although Fort Worth’s HAA5 levels are below the legal limit, they exceed the EWG’s recommendations by 73 times:

There are a couple different ways to measure the hardness of water: grains per gallon or carbonate hardness. Fort Worth’s water measures 6 to 10 grains per gallon, or 100 to 171 parts per million (ppm) of total hardness as CaCO3.

This is seen diagnostically when viewed via live data. If the problem of varying pressure moves past a pre set limit of that which the manufacture states should be the normal range for a certain RPM the vehicle will go into limp mode.  You can reset the normal operating condition by stopping and re-starting the engine.  The problem will re-appear in a short while however.

Although Fort Worth didn’t report any EPA violations in 2022, some contaminant levels are high compared to other American water systems.

This means that Fort Worth water quality comes down to a few different factors, including the quality of the source water and how it’s treated.

All common rail engines use a suction control valve. The Suction Control Valve (SCV) is responsible for controlling fuel pressure in common rail engines.

Then, the Tarrant Regional Water District uses pipes and pump stations to deliver raw water to regional water utilities. It also undertakes water management projects, like building wetlands and treating wastewater, to ensure a consistent water supply.

The City of Fort Worth gets its drinking water entirely from surface water — that is, from lakes and rivers rather than from groundwater wells. According to the Fort Worth 2022 Annual Water Quality Report, it currently comes from the following sources:

Total trihalomethanes are a byproduct of the water disinfection process, which means they aren’t present in the source water, but appear during the treatment process. In high amounts, TTHMs are linked to health problems like skin cancer and bladder cancer.

Fort Worth’s drinking water meets the EPA guidelines for TTHMs, but it has levels 74 times higher than the EWG’s recommended maximum:

Both of these measurements are considered hard water, so Fort Worth residents may want to consider using a water softener to reduce its mineral content.

The City of Fort Worth owns two of these lakes itself, while the others are owned and operated by the Tarrant Regional Water District (TRWD) and the U.S. Army Corps of Engineers. Fort Worth buys untreated water from the TRWD — more than 81 billion gallons in 2022 — and treats it at one of its water treatment plants.

Yes, Fort Worth adds fluoride to its tap water as a public health measure. This water additive is recommended by the American Dental Association (ADA) for oral health.

When the suction control valve is contaminated or worn they will cause the common rail pump to deliver an inconsistent fuel pressure to what is being demanded by the factory ECU.  When the fuel pressure at the injectors jumps around by many thousand of PSI the vehicle driver will experience surging as the ECU tries (and fails) to find the correct operating fuel pressure.

Since Fort Worth’s water comes from multiple sources, and passes through the hands of several service providers, who is ultimately responsible for delivering safe drinking water to residents of Tarrant County?

The City of Fort Worth tests for a wide range of contaminants, including those that are regulated by the EPA and unregulated contaminants that don’t yet have a legal limit. It publishes those test results each year in its annual drinking water quality report.

Chromium-6, or hexavalent chromium, is one of two forms of chromium detected in Fort Worth’s drinking water. This form of chromium, brought to the world’s attention by Erin Brockovich, is a known carcinogen linked to discharges from industrial sites.

Like many other American cities, Fort Worth is dealing with growing awareness of the risks of PFAS, or forever chemicals, in drinking water. Although many industries have phased out their use, these chemicals can persist in the environment for decades.

Finally, Fort Worth Water treats the water to ensure it meets national drinking water standards and delivers it to consumers via a network of 4,000 pipes.

The Environmental Working Group (EWG) identifies 16 contaminants that exceed their recommendations, including the following five.

At the same time, the detection of forever chemicals like PFAS in the water system has raised questions about Fort Worth water quality. If you live in Fort Worth or are thinking of moving there, get the facts about Fort Worth’s water so you can make an informed decision about what’s coming out of your faucet.

Based on its 2022 annual water quality report, Fort Worth water is safe to drink for most residents without any underlying health conditions. People with compromised immune systems are more at risk from rare microbial contaminants like cryptosporidium.

Older homes could still have lead pipes or plumbing fixtures that need to be replaced. Fort Worth offers free lead testing to anyone with a lead service line.

The HomeWater 4-Stage Reverse Osmosis Under Counter Water Filter can filter out many contaminants of concern in Fort Worth’s drinking water, including lead, copper, chlorine, radium, barium, and hexavalent chromium.

Since Fort Worth’s infrastructure is 100 years old, the water department is currently replacing 20 miles of water mains per year to cut down on water main breaks.

They move left and right via a solenoid with each small incremental variation of the throttle and other fueling demands.  The Suction Control Valve uses extremely fine tolerances within their moving parts. The Suction Control Valve is quickly affected by the dirt and or contaminated fuel.

Fort Worth’s water has a turbidity level of 0.7, which reflects the cloudiness of the tap water and is usually caused by soil runoff.

The EPA’s legal limit for nitrates is set at 10 parts per million. Fort Worth’s water meets this standard, but exceeds the EWG’s health guideline by 2.8 times:

NB: Regardless if you know the Part Number or not, we always keep these in stock so when ordering, just note the car details when requested at check out.

According to the most recent water quality report, no sites in Fort Worth that were tested for lead exceeded the federal action level of 15 parts per billion.

Reverse osmosis filters are more effective at removing chemicals like PFAS. They can also remove heavy metals like lead and arsenic, as well as the total dissolved solids (TDS) that make your tap water cloudy or discolored.

Fitting a Diesel Performance Module (Chip) will always exacerbate the problem.  Many people incorrectly blame the Chip for this as the problem may be just under the surface without the Chip fitted. It is at this time that most people head to their dealer for a fix and are given a large bill for the replacement of the Suction Control Valve if it is not covered under warranty.

Arsenic is a heavy metal that turns up in tap water as a result of runoff from orchards, electronics production, and natural deposits. Chronic exposure to arsenic can lead to arsenic poisoning, or arsenicosis, a potentially life-threatening condition.

Home water filters can make a big difference to the taste and appearance of your tap water, but do they make it any safer? That depends on what you want to filter out.

However, compared to cities with newer lead-free infrastructure, lead and copper pipes are still a concern in Fort Worth, Texas. Fort Worth uses corrosion controls to prevent lead and copper from leaching out of service lines, and is taking steps to identify and replace any lead service lines that still exist.

Recent testing identified seven PFAS chemicals in Fort Worth water samples, but at levels lower than the EPA’s proposed limit of 4 parts per trillion (ppt).

Next, the Texas Commission on Environmental Quality (TCEQ) monitors the watershed for susceptibility to pollution from agricultural and industrial runoff. This helps to ensure that the city’s water comes from high-quality, clean water sources to begin with.

All GOOD mechanics will have the necessary tool to do the Relearn calibration however it is not 100% necessary to do as the calibration will still be programmed from the old SCV.