Steam regulatoradjustment

These valves are utilized in residential, commercial, and institutional applications for handling liquids, gases, and slurry. Watts offers ...

Direct Operated Tank Padding Regulator or Gas Pressure Reducing Regulator for Low Pressure 3/4" - 1-1/4" (DN20 - DN32); Internal Sensing - Good for Low Inlet Pressure

SteampressureRegulator

Hydronic Mixing Controls. Tekmar 356 Mixing Control, Microprocessor Control, Import. Part #8211 MFG #356.

This freeze sensor kit can alert you when the temperature around your valve nears freezing. The kit includes a sensor in mounting clip for smaller valves.

Pressure reducing regulators are used to maintain a set downstream pressure point by reducing the supply, also known as inlet pressure, of a fluid or gas to lower the outlet pressure.

Pressure Reducing Valve

After you have correctly sized your regulator, you’ll then need to know the line size, material, type of connection, whether it’s a shutoff or not, and if it’s either direct or pilot-operated.

Spence engineered steam specialty and fluid control products meet the changing needs of today's HVAC and industrial marketplaces. Our steam traps and condensate pumps are designed for industrial applications such as condensate systems, district heating, main steam systems, process control, and process heating

The handle is broached for a secure, non-slip fit to the valve stem. The valve is ASSE 1016 certified to flow rates as low as 1.75 gpm. When used in combination ...

However, the most important things you’ll need to know in selecting a regulator for a specific application are what the flowing media is and what the desired flow rate is, and what the inlet and outlet pressures will be.

HOW WE USE COOKIES:  We use cookies and similar technologies to improve our website, to personalize website content to you,  and to deliver advertising messages and offers on content that are relevant to you.  For more specific information on how we use cookies and to change your cookie preferences, see our Cookie Notice.  Understand and don’t want to see this message again?  Click the X to close this notice.

Our sliding gate pressure reducing regulators are ideal for steam, liquid and gas media applications. However, we also see use cases for the following applications:

We have a variety of pressure reducing regulators available, including self-operated, high flow, differential, vacuum, air-loaded and pilot-operated. Many of our pressure reducing valves have the sliding gate technology which offers precise control in a variety of applications.

How you choose a pressure reducing regulator depends on why you need it. There are five things you need to have to choose the right pressure reducing regulator with the right flow coefficient (Cv):

If you’re not sure what size of pressure reducing valve you need, don’t hesitate to reach out to our experts for help. We also have sizing software available to help with sizing a regulator.

Steamtraps

Steam RegulatorValve

Essential mechanical, thermostatic and thermodynamic elements, optimizing distribution of steam and reducing energy costs.

The compressed spring and diaphragm are the two opposing forces and the plug acts as the balance between the two. The set screw is used to show the regulator how much pressure we want by turning it to compress the spring. A compressed spring generates a force causing it to push down. This opens the plug and results in more flow (of water, air, or other media).

Watts number 909QT 1-1/2" NPT reduced pressure backflow preventer with a double check valve assembly for non-health, low hazard cross-connections, ...

SpenceSteam regulator

Y Strainer Size 2 In Flange Type Class 125 Flanged Connection Screen Size .045 perf Max. Pressure 200psi @ -20 Deg F to 150 Deg F PSI Blow-off Port 1 NPT ...

Steamcontrol valve

Films Featured · Logan's Run (1976). The Fort Worth Water Gardens are shown as a part of the world outside the post-apocalyptic, dystopian society that is the ...

Direct Operated Tank Padding Regulator or Gas Pressure Reducing Regulator for Low Pressures 3/4" - 1" (DN20 - DN25); Balanced Plug - Good for High Inlet Pressures

Steampressure reducing valve working principle

Jordan Valve has a large line of pressure reducing regulators to meet many different specifications and applications, from self-operated to pilot-operated. The sliding gate pressure reducing regulators achieve levels of performance, reliability and accuracy that are not found in other valve designs. Request a quote today.

Designed for use in health hazard cross connections and continuous pressure applications where the water enters the equipment at or below its flood rim.

If there is a change in the controlled pressure, the diaphragm will be forced to move. For example, the pilot plug will allow upstream gas to flow under the diaphragm where the pressure is controlled by the position of the plunger. If any pressure exceeds your set point, the pressure below the diaphragm will be pushed up, closing off the pilot plug.

An RP consists of inlet and outlet shut-off valves, four properly located test cocks, a first and second check valve component, and a relief valve component.

The Spence portfolio includes Steam Traps, Regulators, and Steam Specialties for HVAC, commercial, institutional, and critical applications.

Pressure reducing regulators monitor the downstream pressure and do not need any external power or air source to operate. Instead, they work by force balance. There are 4 main parts to a pressure regulator:

FBVEXPRESS Line 6's FBV Express MKII Guitar Footswitch offers all the classic advantages you expect from a Line 6 foot controller, including rock-solid ...

For assistance choosing the right pressure reducing regulator for your application, use our sizing software program or contact your local representative.