Tekmarwebsite

I have tried to adjust the valves on the sides of the mixing valve. The only numbers on the valve is 1016p. I am tired of a warm shower. My next step wil be ...

Tekmar controlstech support

Hey everyone. Replacing an old Weil-McLain with a Burnham Series 2 299k BTU (input).There are 6 loops going to 6 apartments (Building size is approximately 5,800 Sq Ft).-It is a baseboard heating systemThe heating contractor has ordered an Amtrol Extrol SX-60V expansion tank (32 gallon tank volume) to use on the system (floor standing). Reading the literature on Amtrol's website (link below), it appears that this model is grossly oversized.However, when I pointed this out to him, he insisted that it's what my system needs. So I turn to you: Is there any way that a 299k boiler would need such a large expansion tank?Here is a link to the Amtrol sizing chart:http://www.amtrol.com/media/documents/extrol/9015183_07_16_EXTROL_IO.pdfAmtrol Extrol Specification details:http://www.amtrol.com/media/SUBMITTAL/p44_Submittal_01_17.pdfAnd if it is too big, will that cause any problems? Is it worth arguing over or should I just let it go?Thank you!

TekmarControl Systems

If it were me:I would cancel the order for the bladder expansion tank because you can have him install a steel expansion tank in the ceiling joists of the basement near the new boiler and not have to deal with having an air scoop, bleeding radiators and have a much simpler system to live with...

Hey everyone. Replacing an old Weil-McLain with a Burnham Series 2 299k BTU (input).There are 6 loops going to 6 apartments (Building size is approximately 5,800 Sq Ft).-It is a baseboard heating systemThe heating contractor has ordered an Amtrol Extrol SX-60V expansion tank (32 gallon tank volume) to use on the system (floor standing). Reading the literature on Amtrol's website (link below), it appears that this model is grossly oversized.However, when I pointed this out to him, he insisted that it's what my system needs. So I turn to you: Is there any way that a 299k boiler would need such a large expansion tank?Here is a link to the Amtrol sizing chart:http://www.amtrol.com/media/documents/extrol/9015183_07_16_EXTROL_IO.pdfAmtrol Extrol Specification details:http://www.amtrol.com/media/SUBMITTAL/p44_Submittal_01_17.pdfAnd if it is too big, will that cause any problems? Is it worth arguing over or should I just let it go?Thank you!

The 252LF No-Kink Hose Bib features a copper sweat inlet connection and is also available with the tamper- proof loose key model or an add-on vacuum breaker.

Tekmartech supportCanada

Tiger pressure reducing valve's is manufacturer of high quality push-in fittings, pipe and plastic plumbing systems to a wide variety of industries.

Series WAS Anti-Sweat Valves for Water Closets are used in residential applications for mixing hot water with cold supply water to avoid condensation buildup.

TekmarBoiler Control

However, instead of a vertical pipe that absorbs pressure, water hammer arrestors use a mixture of springs and air bladders to absorb water movement and reduce ...

double check valve backflow preventer assembly is designed to prevent the backflow of polluted water from entering into the potable water supply due to ...

836859 | Cooling Spare Parts | Fisher & Paykel Australia.

How Do Tankless Water Heaters Work? Tankless water heaters provide an endless supply of hot water for as long as it's needed. Because these systems provide hot ...

Stamped Heat Transfer Plates are a thinner version, and are commonly used in sandwich-type radiant floors, where PEX tubing is placed between the finished floor ...

They are used in applications ranging from municipal water systems and fire sprinkler systems to laboratory and processing equipment. Provide Search Feedback.