Thermostatic mixing valves and tempering valves are very similar to each other, with two significant differences. Accuracy and responsiveness to incoming temperature changes. Tempering valves are accurate to within about 3 degrees. While thermostatic mixing valves are accurate to 1 degree and will adjust the outgoing temperature much quicker as a result. The reason for this difference is the application for which the valve is used. Thermostatic mixing valves are required wherever high-risk persons will be using the hot water. Such as:

TekmarControl Systems

*We kindly request three points of contact (email/phone) when booking a job Preferred Booking Window: *MorningAfternoon

The Company tekmar Control Systems Ltd. Canada and tekmar Control Systems, Inc. USA are well established companies in the global marketplace with experience and focus in the hydronic heating industry. Our controls are researched, developed and manufactured in North America.

The installation of tempering valves is not just a safety recommendation, they are mandatory for all new builds, bathroom renovations and when replacing a hot water unit and they are required to be set to a temperature not exceeding 50 degrees.

Tekmartech supportCanada

Regulations surrounding tempering valves are clear. The Australian standard AS/NZ 3500.4 2018 and the associated AS4032.1 2005, outline the requirements for valves and when/where they are to be installed and operated. This covers location, set temperatures and valve specifications.

*We kindly request three points of contact (email/phone) when booking a job Preferred Booking Window: *MorningAfternoon Existing client? * YesNo Preferred Contact Method *PhoneEmail Please attach a photo or video of your plumbing issue (Max: 10mb)

Tempering valves are available for several different scenarios. The “standard” Tempering valve is has been designed for residential situations and fitting to electric and storage gas systems. With a blue, yellow or sometimes green cap.

Tekmar controlstech support

Whether it’s for your home, office or a commercial site application, there is a tempering valve to suit the situation. These are all available in sizes from 15mm – 25mm depending on the flow rate requirements you have. To find the right valve to suit your situation you need to first establish what type of hot water unit you have. Speaking with our team of qualified hot water plumbers will then allow us to guide you the rest of the way. We can install the correct valve and submit the relevant form 4 to QBCC.

Sometimes these issues will result in the tempering valve needing to be replaced but in most cases the issues can be resolved, and hot water restored immediately.

Tekmarthermostats

These high performance tempering valves are adjustable between 40 degrees and 50 degrees and are designed primarily as safety devices. However, there is one model that is designed as a first stage tempering valve which is adjustable between 60 degrees and 77 degrees. These usually have a red cap and are best suited to commercial or industrial applications.

tekmar is a market driven company that listens to its customers. From our market experience, we continuously develop new control technologies to simplify the design and installation of hydronic heating controls.

High performance tempering valves are designed for solar and heat pump hot water or for situations where long runs of pipework are installed. These valves have tighter tolerances and can deal with higher incoming temperatures. You’ll identify these by the orange caps they have fitted.

TekmarBoiler Control

Exploring Different Plumbing Pipe Types:A Comprehensive Comparison If you’re reading this article, chances are you’re wondering what type of...

In conclusion, tempering valves are essential safety devices that mix hot and cold water to deliver steady and safe hot water to your taps. If you’re unsure about your tempering valve or have any concerns about your hot water system, contact a licensed plumber for assistance.

How to Choose a Replacement Toilet Suite A Plumbers Guide Selecting the right toilet for your bathroom can be daunting, especially with the number...

Have you ever wondered what controls the temperature of your hot water? If your first guess is the thermostat – guess again. In this blog we’ll be answering some of the most frequently asked questions about Tempering Valves.

Why DIY Isn't Recommended:Risks of Hot Water System Installation DIY (Do-It-Yourself) repairs have gained popularity in recent years, thanks to...

Control Schools With the increasing competitiveness in the marketplace, quality training is what will set you apart from others in the industry. A few hours of classroom training can save you several hours of frustration and call backs in the field. Training is an investment in yourself that will quickly pay for itself. Whether you install, sell or specify controls, getting the proper control selected and installed properly the first time is critical.

Tekmarwebsite

Tekmarpump controller

Warm water is a breeding ground for bacteria like legionella. In order to combat these nasties and ensure your water is safe, storage hot water systems are required to heat water to over 60 degrees. This temperature is controlled by the thermostat at the tank. The water delivery temperature is controlled by the tempering valves and, excluding the kitchen and laundry, must not exceed 50 degrees.

Finding value in plumbing services. In this post, we will explore some of the important factors to look for when selecting a plumber for...

Tekmartech support Phone number

A licenced plumber can install and test your tempering valve and determine if its operating correctly or not, but some signs you may have an issue are, poor hot water temperature in bathrooms, complete loss of hot water or reduced hot water pressure. Typically, the lifespan of a tempering valve is around 5 years. If you think you may have an issue with your hot water, call our team of licenced hot water plumbers for assistance.

It is also important that the correct type of tempering valve is fitted based on the application and hot water unit installed. A licenced plumber will be able to determine which valve is required in your particular circumstance.

From time to time these valves will encounter problems. Some of the things our hot water plumbers come across regularly are.

Most manufacturers recommend that your tempering valve be replaced every 4 – 5 years and inspected/tested every year. These valves can and often do last a lot longer than that, however we would always recommend following the manufactures instructions. Maintenance on these valves is minimal. Regular testing of water temperature and cleaning of filters is the simplest way keeping your temping valve operating at its optimal level.

Tempering valves generally come pre-set at 50 degrees. The temperature can be adjusted up or down however it is important to remember that current requirements mean adjusting to temperatures above 50 degrees isn’t allowed. If you’re wanting to lower the temperature of your hot water, contact our team of licensed plumbers and we’ll happily be able to assist.

We’ve got a brilliant team on the ground right now who’ll give you real, honest advice and a great price. And all our work is 100% guaranteed.

Tempering valves mix hot and cold water to ensure a steady and safe temperature compliant to the Australian standard is delivered to the taps. This is usually in the range of 40 – 50 degrees Celsius depending upon the application. The use of tempering valves is important as operating hot water in this temperate range both protects people in the house from illness caused by bacteria, such as Legionnaires disease, as well as significantly reducing scalding risk.

*We kindly request three points of contact (email/phone) when booking a job Preferred Booking Window: *MorningAfternoon

For more information, please contact us at: 5100 Silver Star Rd. Vernon, V1B 3K4 Phone: (250) 545-7749 Fax: (250) 545-0650 Web Address: www.tekmarcontrols.com