Absolutely. The biggest health benefit of hydronic heating is that it doesn’t rely on fans, vents or ducts to transport warmth throughout your home, unlike ducted heating and cooling systems, blow heaters and air conditioning units.

Yes. There might be different installation techniques employed, particularly for underfloor heating, which can be installed on top of the existing floor, but ultimately all hydronic heating and cooling systems can be retrofitted with minimal fuss.

Hydronic heating offers the lowest greenhouse gas emissions compared to other home heating system options, and lower energy bills to boot.

You can see how this popup was set up in our step-by-step guide: https://wppopupmaker.com/guides/auto-opening-announcement-popups/

There are many examples of hot water being used for heating throughout the ages. One of the earliest known recorded uses was way back at the end of the 14th century where a monastery in Greenland was using hot spring water to heat the buildings.

Since 1982, Hunt Heating has been providing Australian households with stylish, safe, and comfortable heating and cooling solutions. As exclusive stockists of premium hydronic heating products, we ensure that all homes can enjoy the benefits of low carbon, energy-efficient systems.

With servicing of your hydronic system as per manufacturer’s guidelines, hydronic heating is one of the safest options for climate control for your home.

SharkBite PEX pipe meets NSF/ANSI Standard 61, and is approved for drinking water systems. Learn more: NSF/ANSI Standard 61

You can see how this popup was set up in our step-by-step guide: https://wppopupmaker.com/guides/auto-opening-announcement-popups/

By engaging with trained professionals with specific experience and training in hydronic heating installation, you’re protecting your investment and will get the best performance from your system.

Water flow electrical pressure switch pex to pexinstructions

Compared to other home heating and cooling systems on the market, hydronic heating wins points on the following over competitors.

PEX pipe is easier to install than rigid pipe, and it is available in long coils which can eliminate the need for extra fittings. PEX pipe is flexible and can be navigated around obstacles. PEX pipe doesn’t require the use of glue or cement, can be air tested and can be installed in wet or dry conditions. Additionally, PEX pipe is freeze-damage resistant whereas CPVC pipe is susceptible to cracking at temperatures below 50°F. Download now: Homeowners Comparison: PEX vs. CPVC

Yes, SharkBite PEX pipe is approved to AWWA C904 which covers PEX pipe in regards to burial. Be sure to check with local, city or state codes to see if the pipe needs to have sleeves or any type of protective burial for your area. PEX pipe can be used as a service line based on its corrosion resistance to soil and water, its long life, and its oxidative resistance. Learn more: American Water Works Association

Yes, PEX pipe can be installed under a concrete slab. Since PEX pipe is supplied in coils, installation can be completed in one continuous length without the need for extra fittings. PEX pipe can also be encased within a slab, which is commonly used for radiant floor heating. In cases where PEX pipe penetrates a concrete slab, it must be protected with a nonmetallic sleeve at the penetration point.

Ducted systems can filter the air to a degree, but ultimately because it is using fan forced air to warm your home, there will be airborne dust particles, pollens and other pollutants circulating. Dust also builds up inside air ducts and can be costly to properly clean, unlike with hydronic systems where you simply wipe over the unit with a damp cloth.

PEX pipe is approved for residential and commercial hot and cold water distribution systems, municipal water service lines, radiant panel heating systems, hydronic baseboard heating systems, snow and ice melting systems and building services pipe.

If you opt for underfloor heating or trench hydronic heating systems, the surface temperature is comfortable and controlled by thermostats. Like ducted heating, there are no electrical connections, which further reduces any safety concern.

The entire system is powered by a boiler or a heat pump. Boilers heat water that is then piped through a closed loop system throughout the home. Different boilers will have different running and installation costs, depending on the fuel they require and their level of efficiency. The boiler you choose for your new system will depend on a number of factors, including whether your home has access to natural gas, the layout of your home, and your budget.

Water flow electrical pressure switch pex to pexmanual

SharkBite® PEX pipe is a cross-linked polyethylene tubing that provides an excellent option for plumbing, radiant and hydronic systems in both residential and commercial plumbing applications. When combined with our push-to-connect fittings, manifolds, valves and other supplies, PEX pipe offers the fastest way to plumb any project. PEX pipe is made from cross-linked HDPE (high density polyethylene). The HDPE is melted and continuously extruded into a tube to form a high-performing pipe suitable for a variety of potable and non-potable plumbing applications.

While the initial installation cost for a hydronic system may be a higher investment than a ducted system, the ongoing running costs for hydronic are lower and a big reason it is chosen over ducted systems. In either case, it pays to have quality insulation throughout your home.

Another potential health risk with ducted heating systems is carbon monoxide poisoning. When ducted systems are not serviced regularly or are faulty or damaged in any way, there is the possibility of large volumes of carbon monoxide being produced and leaking into the home, which is not good news. The best thing to do is ensure you have it serviced regularly (as advised by the manufacturer).

No. PEX pipe does not require glue or cement, and can simply be joined with push-to-connect fittings, metal insert fittings, or plastic insert fittings for a watertight seal.

Hunt Heating systems provide flexible climate control options at a lower cost, making us the smart choice for heating and cooling your home. We stay committed to product innovation so that you can enjoy the best heating and cooling solutions right here in Australia.

SharkBite PEX pipe carries a 25-year warranty against any manufacturer’s defect as long as the item has been installed per the installation instructions and complies with local code. Learn more: SharkBite Warranty

Unlike other heating systems that use fans or vents to blow warm air around the room, hydronic heating heats objects through radiation, which results in an even distribution of comfortable heat.

Square Dpressure switchmanual pdf

Yes, PEX pipe is approved for radiant or hydronic heating applications. Since ferrous components are likely to be present in the system, it is important to use oxygen barrier PEX pipe to help prevent ferrous components from rusting. Learn more: SharkBite Radiant PEX Tubing

Thermostats may also be used to direct certain temperatures to different heating zones within the home and may be programmed to switch on and off at certain times of the day. Hydronic heating is believed to be one of the most comfortable forms of heating because it heats objects in the room, rather than the air. This results in an even and consistent distribution of non-drying heat, with no cold spots or fluctuations in temperature.

Compared to other home heating system options, hydronic heating is hands down the best choice when it comes to caring for everyone’s home – mother earth.

Suitable for any home, there are wall heating options that can work for every room in the house, including your bathroom.

The water in hydronic heating systems is always well below boiling point and surface areas on radiators and towel rails will not burn or scald little hands.

PEX pipe is part of a water supply piping system that has several benefits over metal pipe or rigid plastic pipe systems. It is flexible, resistant to scale and chlorine. PEX pipe doesn’t corrode or develop pinholes. Plus, it is faster to install than metal or rigid plastic and has fewer connections and fittings.

The cross-linking method is the difference between PEX-A, PEX-B and PEX-C. Cross-linking is defined as polyethylene material that has undergone a change in molecular structure using a chemical or a physical process whereby the polymer chains are chemically linked. SharkBite non oxygen barrier pipe is manufacture as PEX-B and SharkBite oxygen barrier pipe is manufactured as PEX-C. As background, the methods for cross-linking are:

Hydronic wall heating offers a host of benefits, which explains the surging popularity of their installation in homes, child care and aged care settings and health care environments in Australia, with specifically designed wall heating products for safety critical settings.

The first known record of underfloor heating was in ancient Rome using a radiant heating system called ‘hypocaust’ – ahead of their time!

Water flow electrical pressure switch pex to pexinstallation

A great way to warm every area of your home, including your bathroom! Underfloor heating can be installed into new properties on the ground floor within the foundation slab, or to existing floors with a range of installation options to choose from. There are considerations to keep in mind before installing heated floors to ensure you make the best choices for your property.

PEX pipe is easier to install than rigid pipe, and it is available in long coils that can eliminate the need for extra fittings. PEX pipe is flexible and can be navigated around obstacles. For more than 30 years PEX pipe has proven its durability and shown that it is not susceptible to problems found in metal piping systems such as reduced ID (occlusion), corrosion, electrolysis, filming, mineral build-up and water velocity wear. Download now: Homeowners Comparison: PEX v. Copper

Thermal radiation is the transfer of heat through the air in the form of electromagnetic radiation waves. In hydronic heating, heat emitters such as wall-mounted radiators, underfloor coils and heated towel rails emit radiant heat to warm the room. Because radiant heat is absorbed by objects, it cannot be blown away or moved.

You can see how this popup was set up in our step-by-step guide: https://wppopupmaker.com/guides/auto-opening-announcement-popups/

PEXfittingpressuredrop chart

While the installation cost might be an outgoing you want to avoid, or if you consider yourself pretty handy on the tools, it is still highly advisable that you don’t embark on hydronic heating installation as a DIY weekend project.

On average, 40% of the energy we use at home is for heating and cooling – and this doesn’t include heating hot water. Your choice of heating system will have a large impact on your home’s carbon footprint.

Keep the PEX pipe a minimum of 12 in. vertically and 6 in. horizontally from sources of high heat such as recessed light fixtures, gas flue vents, heating appliances or electric motors. Forced air heating ducts are not generally considered sources of high heat. These areas of installation should be rechecked after further construction and other mechanical systems have been installed.

DoPEX90s restrictflow

With more than 40 years hydronic heating experience, Hunt Heating remain the most trusted experts in hydronic heating and cooling across Australia.

Perfect for homes with floor to ceiling glass facades and limited wall space, trench heating is flush with the floor level and operates through a shallow trough that runs the perimeter of the space, covered with a grille. There are a range of design options available to suit the design of your home.

3/4pexvs copperflowrate

PEX pipe is not approved for outdoor applications and is not approved for continuous UV exposure. PEX pipe should not be stored in direct sunlight.

Many hydronic wall radiators can be custom painted to match existing decor or designs in your home or commercial space. Your best bet is to check the product specifications of the radiator panels you are considering to ensure ‘Colour Options’ are available prior to purchase.

Hydronic heating and cooling has come a long way since then, with many product and installation options for residential and commercial climate control solutions.

This question is a matter of ongoing debate for some, but realistically there are benefits to both home heating systems. While initially a bigger investment to purchase and install, ultimately hydronic heating comes out on top for health and safety, running costs and ongoing expenses.

Not limited to the bathroom walls of fancy hotel suites, heated towel rails are now available to homeowners, with benefits existing beyond the luxury.

PEX pipe can’t be heated or exposed to a direct flame. The best method to the pipe for straightening is by soaking the pipe in warm water or running warm water through the pipe. Please make sure that the pipe is not exposed to direct UV rays.

Increasing in popularity for installation in Australian residential and commercial settings alike, hydronic heating and cooling systems offer a wide range of benefits, including high thermal comfort levels with lower running costs; reduced greenhouse gas emissions and increased sustainability against global warming through re-use of waste heat; lower noise levels than air conditioners, and the ability to install in new or existing homes with little disruption.

Water is an excellent conductor of heat, which is why hydronic heating is so efficient. In a hydronic system, heat is transferred into the room via thermal radiation.

Yes, PEX pipe is freeze-damage resistant. PEX pipe will expand if frozen and contract to its original shape when thawed. PEX pipe is not freeze-proof. You should use the same standard insulation precautions with PEX pipe to help prevent freezing.

Yes, PEX pipe can save money in numerous ways. PEX pipe is more cost effective than copper. Plus, PEX pipe is flexible which makes it fast to install and requires fewer directional fittings. When SharkBite PEX pipe and fittings are used together, the labor savings are huge.

Hydronic heating works by circulating heated water throughout the home via a sealed pipe network. The heat in the pipes then radiates into the room through wall-mounted radiators, convectors, or underfloor heating systems.

Extra energy efficiency heating points are scored by using a condensing boiler, which extracts heat that would generally escape via water vapour. The heat is recycled to pre-heat the water before it makes its journey back to the boiler.

Generally speaking, most ducted heating is gas run, but also uses electricity for the fans. It also depends on the choice of heat source which can be gas powered or electricity powered.

Hydronic heating uses hot water to heat your home and is one of the most efficient and versatile forms of heating. Also referred to as radiant heating, a hydronic heating system circulates heated water through sealed pipes to underfloor heating systems, trench convectors, panel radiators, or heated towel rails.

Dirty air ducts and vents can result in people getting headaches, respiratory issues, asthma or allergies worsening, general lethargy and skin rashes including eczema and sinus issues.

Similarly, in trench convectors, a special panel installed inside the trench is heated by the system’s hot water. As cold air from the room falls into the trench, it is heated by the panel and rises back into the room through the trench’s grilles. As with the other hydronic heat emitters, no hot air is blown out – it is simply the hot air rising from the heated panel.

There are no performance differences between red, white, blue and white PEX and all are intended for use in potable water systems. The colors can be used to easily distinguish between hot and cold distribution lines. Orange PEX pipe is an oxygen barrier PEX pipe used only for hydronic heating applications.

PEXvs copperflowrate chart

Most commonly associated with heating, hydronic systems can also provide efficient and effective cooling for your home. Hydronic products including underfloor, trench systems and wall mounted fan coils offer both powerful heating and cooling in one product. A great example is the Galletti ART-U.

Yes, it can. The most common options for residential hydronic heating fuel sources are natural gas or electricity by way of an energy efficient boiler or air to water heat pump.

Dust mites, pollens, pet and people dander, fungal spores and other airborne pollutants can spur the growth of mould, which is a serious trigger for asthma sufferers. Approximately 2.7 million Australians have asthma across all age groups and there are just as many who experience seasonal allergies.

Also known as radiators or radiator panels, products come in a wide range of sizes and configurations offering flexibility for installation locations. Gone are the days of a standard radiator, there are also many designer radiator options on the market that can act as a style feature for your home.

We’ve rounded up the basics, along with the most frequently asked questions about hydronic heating, to give you a thorough overview of this sustainable and energy efficient approach to climate control.