You are about to leave the security of WebstaurantStore.com.We are not responsible for the privacy policy or any content, links or software, or any consequences from your access to or use of the technologies, websites, information and programs made available on this new site.Do you want to proceed?

NSF has earned the Collaborating Center designations by the World Health Organization (WHO) for Food and Water Safety and Indoor Environment.

Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the O-ring provides a permanent leak-proof seal.

Pull on the tube to check that it is secure. It is a good practice to test the system prior to leaving site and/or before use.

The Water Quality Association’s Gold Seal Certification Program is dedicated to providing public health and safety services throughout the USA and globally, while maintaining expert service, superior reputation, and fair pricing. The Gold Seal Program offers certification of all products and chemicals that contact drinking water.

To disconnect, ensure the system is depressurized before removing the tube. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used.

Founded in 1979, WORLDWIDE WATER TECHNOLOGIES, INC. (WWT), provides services, state-of-the-art equipment and products for all water and air concerns.

Watts S1156F vsSB1156F

Please allow up to 10 business days, starting with the next business day after your order was placed, for delivery. Many orders will be received in less time. Back-ordered items may require extra time. Should any items in your order be delayed, we will contact you. If we can not deliver your order in this time frame, the order may be canceled prior to shipment, and a full refund will be credited.

To get started, identify the pipe material. SharkBite brass push-to-connect fittings are compatible with PEX, Copper, CPVC, PE-RT and HDPE pipe. SharkBite fittings come with a PEX stiffener pre-loaded into the fitting for PEX, PE-RT and HDPE. The PEX stiffener does not need to be removed for Copper or CPVC applications.

The following warranty is effective from the date of installation or 60 days after shipment, whichever date comes first.

It is possible that the flow restrictor may be installed on the inlet port, however this is not recommended. If upon removing the fitting from the outlet, if it is not found to have a flow restrictor in the fitting (usually stainless steel), remove the inlet fitting and see if the flow restrictor was installed on the inlet side.

To see our “in-store” price on this product, you must add it to your Shopping Cart by clicking the Add to Cart button. Please be assured that adding an item to your cart does not obligate you to purchase it–you can always delete the item from your cart.

These are our shipping rates for orders shipped within the continental U.S. (excluding Alaska & Hawaii). There is a minimum order total of $20. Please see our Shipping Section on our Terms & Conditions page for more detailed information.

SharkBite brass push-to-connect fittings create a seamless and easy transition between different types of pipe materials. No tools are required and the fittings can be even installed in wet lines. The fitting can be rotated after installation, so you can install without having to worry about how it’s positioned. SharkBite fittings are also approved for behind the wall and underground installations. If the fitting is being installed for underground use, wrap with silicone self-adhesive tape before burying.

This Watts 1/2" high capacity feed water pressure regulator is designed to fill the boiler and system piping with water while also maintaining water pressure in the system. Additionally, this regulator provides make up water to the system in the event of system leaks. It features a 1/2" union solder inlet connection with a bronze valve body and stainless steel strainer, which protects the valve disc from fouling.This regulator has a high capacity performance and a simplified servicing accessibility for complete unitized maintenance. It also has a tight seating check valve and a purge lever for manual purging. It has an adjustment range of 10 to 25 PSI with a maximum working pressure of 100 PSI and a maximum temperature of 212 degrees Fahrenheit.

Since 2009, PureWater Filters® has been producing high quality water filtration products which are used all around the world. We believe that everyone ...

Be sure the pipe is free of scratches or debris and cut the pipe as cleanly and squarely as possible. If you are working with copper pipe, use a deburr tool or sand paper to remove any sharp edges or burrs on the pipe. Failing to deburr the pipe properly can compromise the fitting.

Buttress Threads provide superior sealing and higher burst ratings than the Acme Threads found on most housings. Because of this, Pentek introduced their line of 3G Housings that feature buttress threads. We also carry housings from Watts/Flowmatic & Kemflo that utilize buttress threads.

JG tubing is 230 psi rated flexible plastic tubing. This tubing is tough. Much more flexible than copper, it will probably last forever!

Tekmar® Radiant Thermostat, User Interface: Pushbutton, NTC Thermistor Sensor, 1 Stage, 10 to 30 VAC/VDC,

Special order merchandise or custom-built equipment requires longer lead-time. Large orders and assembled whole house units are shipped via common carrier, stretch wrapped on a pallet.

How to adjust Watts boiler Feed valve

John Guest is the originator of Quick-Connect Fitting Technology and the world leader. John Guest Fittings, Valves & Tubing are produced in the UK to exacting quality standards that are second to none!

Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the O-ring provides a permanent leak-proof seal.

PRESSURE REDUCING VALVE REPAIR KIT 12 Inch -

We ship in stock items on the next business day in most cases. UPS Next Day Air and 2nd Day Air orders received before 3:00 pm Eastern Time can be shipped the same day, if ordered by phone and a request is made to expedite the order.

WARNING:This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

WattsSB1156Fadjustment

In 2011 Congress enacted the Reduction of Lead in Drinking Water Act to amend the Safe Drinking Water Act’s section regarding the use and introduction into commerce of lead pipes, plumbing fittings or fixtures, solder and flux. The Act established a prospective effective date of January 4, 2014, which provided a three year timeframe for affected parties to transition to the new requirements. All of the metal fixtures and fittings sold by H2O Distributors are compliant with this act.

A minimum of $20.00 purchase (before shipping and applicable taxes) is required for all orders placed through this web site.

Series P60 Miniature Plastic Water Pressure Regulators are used in general purpose and OEM applications to regulate pressure in systems that require a constant downstream and accurate flow performance. It consists of a thermoplastic body construction with 1/4 in. NPT female connections in a straight through or 90° inlet to outlet design, all external components of NSF approved thermoplastics, all internal rubber components (disc, diaphragm, and seals) of FDA grade elastomers, all internal metal components of 300 Series stainless steel, and a bottom clean-out plug for service. Options include 3/4 in. hose connection, 1/4 in. gauge, strainer, gauge port, quick disconnect for plastic tubing and mounting kit. Series P60 is compact and lightweight with a high flow capacity. It is also suitable for deionized water applications. Maximum Working Pressure: 300psi (20.7 bar).

Febco 825YA Angle RPZ Backflow Preventer 2 in. FPT. Size: 2 in. Max Working Pressure: 175 PSI; Connection: Female Pipe Thread; Maximum Working Pressure: 175 ...

As the largest online restaurant supply store, we offer the best selection, best prices, and fast shipping to keep your business functioning at its best.

[  Requires Adobe Acrobat Reader ] Reduction of Lead in Drinking Water Act More Information on Lead in Drinking Water

To disconnect, ensure the system is depressurized before removing the tube. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used.

Orders over $150 receive free UPS ground shipping in the continental U.S. (excluding Alaska & Hawaii). Exceptions exist, and additional freight charges will apply for some low priced, drop shipped items from Canada and for addresses that carry accessorial UPS charges, such as certain island destinations that require ferry service and other remote locations. We will notify you of any additional amount before it is charged.

It is recommended that the flow restrictor be installed on the outlet port to prevent the small opening from becoming clogged with sediment from the untreated water.

On valves having strainers the screen should be removed and cleaned at least once every six months, more often if water conditions are bad. TO READJUST Pressure ...

John Guest quick connect fittings connect and disconnect without tools and never leak. Tough as nails NSF Certified and ISO 9001 Certified. These fittings are trusted the world over. John Guest fittings, ball valves and tubing are the best components for a water tight seal every time.

The warranty on the system is effective when the system is functioning under normal operating conditions. Any variation in normal operation that may cause the unit to malfunction will void the warranty. Examples include if a pressure reduction valve fails (or is not installed) causing the system to be exposed to high pressure, exposure to freezing temperatures, etc.

PWDWHCUC1. Este sistema de filtrado con carbón de rendimiento superior. PWDWHCUC1 de Watts Pure Water se conecta a la sección de agua fría del grifo de la ...

Watts 1156F rebuild Kit

Unlike other fittings, SharkBite brass push-to-connect fittings can be removed and re-used if changes are necessary. To remove the fitting, use a SharkBite Disconnect Clip or Disconnect Tongs. To use the Disconnect Clip, snap it on to the pipe and pull up to the release collar. Press the release collar using the Disconnect Clip and pull the pipe from the fitting. To use the Disconnect Tongs, slide the tongs over the fitting and the pipe. Squeeze the tongs to press the fitting’s release collar and pull the pipe from the fitting. The SharkBite Universal brass push-to-connect fitting is ready to re-use.

To increase the flow to 1 GPM to match the flow rate of the MAF Cartridge, the .5 GPM fitting must be replaced with a 1 GPM fitting. The MAF cartridge will work with the .5 GPM flow restrictor, but the flow will be limited to .5 GPM. It is only necessary to replace this fitting if you desire an increase in your flow rate.

IF YOU REQUIRE SHIPPING PLEASE FOLLOW THIS LINK. ... The Zodiac FloPro e3 is an economical, energy efficient, easy to use 3-speed variable pool pump specially ...

Everpure systems include a .5 GPM flow restrictor fitting that should be installed in the outlet port of the head. The fitting limits the flow of water that can go through the filter to .5 GPM.

View all finish plumbing, smart connected products, sensor faucets, soap dispensers, sensor flush valves, manual flush valves, aquaspec manual faucets.

Pull on the tube to check that it is secure. It is a good practice to test the system prior to leaving site and/or before use.

Mueller 758 Y Strainers. MODEL, SKU, SIZE, MATERIAL, END TYPE, PRESSURE/TEMP (WOG). Mueller 758 Y (Wye) Strainer. 758. 3/4" ‒ 24". Cast Iron. Flanged End.

NSF is widely recognized for its scientific and technical expertise in the health and environmental sciences. Its professional staff includes engineers, chemists, toxicologists, and environmental health professionals with broad experience both in public and private organizations. NSF certified products will be marked with a symbol.