As the water flows through the valve, it passes through the diaphragm that is connected to a spring and reduces the pressure to the desired level as the water moves from the valve through the other side.

This difference means that a high level of stress is put on your plumbing system. Eventually leading to frequent repairs and costly replacement of parts. Your fixtures will last longer if your home maintains appropriate water pressure.

Water Pressure Reducing Valves have been labeled as a “life-of-mortgage” product because a malfunctioning water pressure-reducing valve is not replaced but simply cleaned or repaired by an inexpensive service kit.

Water Pressure Reducing Valve Size: 11⁄4", 11⁄2", 2" Limited Warranty: Watts Regulator Co. (the Company) warrants each product to be free from defects in ...

Series 1156F High Capacity Feed Water Pressure Regulators are for use in commercial and residential hydronic heating systems to fill the boiler and pipi...

High water pressure can put stress on your pipes, causing them to break or damage the plumbing fitting leading to leaks.

If you are more of a do-it-yourself homeowner, you can buy one and install it yourself. It often requires cutting out a section of your main water line and joining on the valve.

So, you might be wondering, why would we want to install a pressure-reducing valve in our homes when we want more pressure?

These valves allow you to set your water heater to the recommended 140°F to reduce bacteria, while sending cooler 120°F water to your faucets, showers, and tub.

Ultimately, having too much water pressure will inevitably cost you money! But, you can always prevent expensive repairs and damages by controlling the stress in your home using a pressure-reducing valve (PRV).

Product Details. Y strainers, named for their Y shape, help prevent the mixing of any solids, pipe scale, rust, or debris with any liquid, gas, or steam ...

Most of the time, people complain about their water pressure when it is not coming out on the fixture strong enough for them.

When water is flowing at a lower pressure, it means less energy is needed to be used to heat water. Ultimately, it can also help you save money on plumbing maintenance since it reduces the issues with your plumbing system caused by the high pressure of water.

Manufacturer, Watts. Part Number, 007M1QT. Item Weight, 8.58 pounds (3.86 kg) (3.86 kg). Product Dimensions, 0.17 x 8.5 x 6.5 inches (0.4 x 21.6 x 16.5 cm) ...

If you think that a water pressure-reducing valve could benefit your plumbing system, contact Caccia Plumbing today. Our skilled plumbers can properly size and fit a valve for your home to give an outstanding performance that preserves and protects your plumbing system.

We offer free irrigation system design consultations. Feel free to contact us (M-F 9 am-3 pm PT) with any questions you may have about our products and how they can work together to irrigate your operation. We have decades of experience and are happy to help.

DRILL. SIZE. DIAMETER. (INCHES). NAT. GAS. (BTU/HR.) DRILL. SIZE. DIAMETER. (INCHES). LP GAS. ( ...

6" 6; 2" 5; 1/2" 4; 8" 4; 1 1/2" 3; 1-1/2" 3; 1 1/4" 3; 1-1/4" 3 ... Zurn Wilkins 375 Series Reduced Pressure Zone Backflow Preventer (Device Only) 20mm.

At Grow Irrigation, our vision is to use irrigation technology to help US  growers compete in an evermore challenging environment. We do this by providing you with the best and most relevant products for your farm at competitive prices.

Pressure-reducing valves decrease the incoming high pressure of water into a lower and safer pressure for your home. They are normally installed on the main water line next to the shut-off valve.

There are different styles of water pressure-reducing valves and various installation charges throughout the country. But mostly, pressure-reducing valves start at around $50. Having a new pressure-reducing valve installed by a licensed plumber will seemingly set you back around $350-$500.

Product Details. This 1/2-in brass relief valve protects well tank systems from pressure buildup. It is recommended for use on all submersible pumps or systems ...

Having normal water pressure is the code to maintain healthy plumbing in your home. If left unchecked, high water pressure will wear out just about everything that comes into contact with your plumbing system.

Here’s the deal! Often, the water coming into our home is under intense pressure, which can result in a plumbing system risk like pipe leaks, floods, and even busted appliances.

Brand: WATTS ; Manufacturer Part Number: 009-M1-QTS ; Valve Series: 009 ; For Media: Water ; Hazard Protection Level: High Health Hazard.

Maintaining your home’s water pressure and having a working pressure-reducing valve will help you save money over time. Spending a few hundred dollars today can spare you thousands in the future.

Every plumbing-related fixture and appliance in your home was made to handle water pressure of typically between 50-80 psi. But, your municipal water line could be pumping water to your home as high as 150 psi!

A reducing valve can also be set to any desired downstream pressure within its design limits. Once the valve is set, the reduced pressure will be maintained despite the changes in the supply pressure and system load variations.

The Shaws 90mm Basket Strainers are made in Italy and designed specifically to fit our thick-wall fireclay sinks. Each strainer features a ceramic insignia ...

High water pressure decreases the lifespan of your plumbing system, from pipes and water heaters to dishwashers and showerheads.

Water pressure-reducing valves save water, as less pressure it gives, it reduces wastewater treatment load and further protects the environment. It also helps in saving energy!