A domestic pressure reducing valve, also known as a pressure regulator, is a device that is installed in a domestic home to control and reduce the water pressure that is supplied to the home. The purpose of a pressure reducing valve is to maintain a consistent and safe water pressure throughout the house, which is important for a variety of reasons.

In addition, a pressure reducing valve can also help to lower your water bill. High water pressure can cause water to be wasted, leading to higher water bills. A pressure reducing valve helps to reduce water waste by maintaining a consistent pressure throughout the house, which can lower your water bill and help you save money.

We’ve all had those moments when we let the water run for 30 seconds or sometimes even a minute before any hot water came out of the faucet. With a hot water recirculation system, this will no longer be an issue.

No, another benefit of a pressure reducing valve is that it helps to improve water flow. High water pressure can cause low water flow, which can make it difficult to use multiple fixtures at the same time. A pressure reducing valve helps to improve water flow by maintaining a consistent pressure throughout the house. This ensures that water is delivered to fixtures such as showers, bathtubs, and sinks at a steady rate, making them more efficient and easier to use.

When the water is recirculated through the system, it doesn’t get a chance to cool down, offering a constant flow of hot water. However, there is one issue with this: your water recirculation system is working nonstop, ultimately driving up your energy bill, and it ends up being a costly luxury.

In Melbourne, the standard recommended setting for a domestic plumbing system pressure reducing valve is around 500 kPa. However, the exact setting can vary depending on the specific needs of the plumbing system and the local water supply pressure, which can range from 300 kPa to 800 kPa. It’s best to consult with a licensed plumber to determine the appropriate setting for your specific plumbing system.

When you don’t need to keep your water running to pull hot water, you save money on your water bill. If you have a hot water recirculating system and you don’t need to keep it running constantly, you save money on your electric bill. On-demand hot water recirculating systems allow you to use hot water in the most efficient way possible. What these systems do is record your daily water usage habits. They are programmed to run during times you’re typically using hot water. If your schedule changes, they adapt. They’re designed to constantly evolve with your routines. These smart systems only keep your pump running for less than 30 minutes a day, saving you a fortune on your electric bill.

Image

A pressure reducing valve solves these issues by reducing the water pressure to a safe and optimal level, thereby ensuring the longevity and proper functioning of the plumbing system. In this blog post, we’ll delve into the benefits of having a domestic water pressure reducing valve, its workings, and why it’s an important addition to your home’s plumbing system.

This guarantee only applies to our controllers. AquaMotion Pumps and AMK-ODR valves are excluded from this guarantee once they have been installed.

Before jumping in, get the facts about hot water recirculation systems and what system is best for your home or business.

Constantly running hot water can also cause copper pipes to erode. This can lead to pinhole leaks in your pipes, which will then need replacement. On-demand hot water recirculating pumps solve those problems.

On-demand recirculating systems can help you save money on your electric bill and water bill, and you also have the added benefit of not having to wait for hot water.

The on-demand pump controller is contained within the utility closet and works from any plumbing fixture. Control the settings of the Recirculation Control via a smartphone app. on both Android and iPhone.

One of the main purposes of a pressure reducing valve is to help protect your home’s plumbing system. The control valves ensure that incoming water pressure doesn’t exceed your plumbing systems limits. They are uniquely designed to reduce the pressure in case it gets dangerously high by letting it out of the water system.

A pressure reducing valve is an essential device that is installed in a domestic home to control and reduce the pressure that is supplied to the home. It is important to have one in your home to protect your plumbing system, improve water flow, protect household appliances, and lower your water bill.

Homes today are installed with standard hot water heaters—typically hot water tanks or tankless systems. When you take a shower, wash your dishes, or turn on your dishwasher, the water typically must run for 30 seconds or more before any hot water comes out. This is because the water has been sitting in the pipes and has acclimated to room temperature. With a hot water recirculating system, this isn’t an issue. This is because the water is constantly circulating, so it doesn’t have an opportunity to cool down.

Image

Our on-demand recirculation pump for hot water recirculation system provides on-demand hot water throughout your house without the need to install buttons and run wires.

If you suspect that your home does not have a pressure reducing valve or if you have concerns about the performance of your water pressure, it is a good idea to contact a local plumber for a professional assessment and recommendations.

High water pressure can cause damage to pipes, fittings, and fixtures, leading to leaks and costly repairs. A pressure reducing valve helps to prevent this damage by reducing the pressure of the water that is supplied to the home. This helps to prolong the life of your plumbing system and can save you money in the long run.

As local emergency plumbers in Melbourne we’ve come across many plumbing problems that could’ve easily been avoided with a water pressure reducing valve.

A domestic water pressure reducing valve is a crucial component of any domestic plumbing system, as it helps to regulate the flow of water and maintain a safe and consistent water pressure level. With the increase in water pressure, there can be various problems, such as leaks, damage to pipes and fittings, or reduced water flow.

When water sits in a pipe, it begins to drop in temperature from heat loss, quickly matching the temperature of the pipes. Therefore, typical recirculation systems constantly run water through the pipes to keep them heated.

No, a non-return valve (also known as a check valve) does not reduce water pressure. Its purpose is to prevent water from flowing back in the reverse direction once it has passed through the valve. Non-return valves are commonly used in plumbing systems to prevent backflow and ensure that water flows in the intended direction. While it does not reduce water pressure, it can help to maintain a consistent water flow rate by preventing backflow and ensuring that water is only flowing in one direction.

On-demand hot water recirculating pumps work with one key difference: your water isn’t constantly recirculating. You won’t need to worry about destroying your pipes, and it won’t cost you an arm and a leg. On-demand systems only pull hot water when necessary; smart recirculation pumps typically run less than 30 minutes a day. These systems are designed to learn and record your daily habits, adjusting them as needed. With a combination of smart time technology, you’ll never have to worry about high water or energy bills from your hot water system again.

Having a hot water system running day in and day out may give you hot water quickly—but it’s also going to cost you a fortune. You’ll have to worry about high energy costs, and you also run the risk of eroding your copper pipes. This can lead to pinhole leaks, forcing you to replace the pipes altogether. In the end, this can be very costly. However, this all changes when you switch to an on-demand hot water system.

If after installing the Smart Recirculation Control you are dissatisfied for any reason whatsoever with the performance of the Smart Recirculation Control, simply package up the unit and return it to us with a note explaining what about the product you are dissatisfied with and we will refund your purchase price (minus original shipping charges & credit card fees, the banks keep these now).

A pressure reducing valve also ensures that the water pressure is safe for household appliances such as washing machines, dishwashers, and boilers. These appliances are designed to operate at a specific water pressure, and high pressure can cause damage to them, leading to costly repairs or replacements. A pressure reducing valve helps to protect these appliances by reducing the pressure of the water that is supplied to them.

Image