Where water is connected to a heating system boiler as a make-up water supply, it must be protected by a dual check valve with integral vent (standard no. ASSE 1012). This device is considered “non-testable” and must be rebuilt or replaced every five years. If chemicals are added to the heating water system (this is not common), an ASSE 1013 must be installed and special provisions for drainage need to be considered and yearly testing by a plumber is mandatory.

Backflow – is the undesired reverse flow of contaminants into the potable water from an “end-use” hazard and is typically driven by common, but unfavorable, hydraulic events in either the public or a private water distribution system.

Backwater valve

Since their inception, residential fire sprinkler systems have been supplied with water by three different piping arrangements. The following describes the details of each variation:

Mixing valves are designed to blend hot water with cold water to ensure a constant, safe outlet temperature.

WSSC Water started the Cross-Connection Control Program to keep the drinking water safe for everyone. Unprotected or improperly protected cross-c...

2018626 — Nu, 14 jaar oud. Nu, is 14zijn jaar natuurlijke later, is zijn ... Eerbeek B.V. Kollergang 12 6961 LZ Eerbeek T: 0313-65 69 09 E ...

PVB may be winterized in place; RP’s must be removed and placed in a warm storage area. Both assemblies require their annual test at the time of spring seasonal start-up.

Cross-Connection – is the physical connection between the potable (drinking) water system and an “end-use” (water utilizing fixture, equipment, or process) where a potential water contaminating hazard exists.

Series LF25AUB-Z3 water pressure reducing valves are designed to reduce incoming water pressure to a sensible level to protect plumbing system components and reduce water consumption. This series is suitable for water supply pressures up to 300 psi (20.7Replaceable seat moduleIntegral stainless steel strainerBypass feature controls thermal expansion pressureHigh temperature resistant reinforced diaphragm for hot waterStainless steel strainer, EPDM diaphragm/valve disc

WattsBackflowpreventer

Dielectric Union for Natural Gas and Petroleum Service by Hart Industries.

Every hose bibb, regardless of age or usage, must be outfitted with a vacuum breaker meeting the product standard/listing ASSE 1011 or ASSE 1019.

Hint for owners with irrigation systems: make the testing part of your spring start-up contract. The irrigation firms may be able to procure the most favorable pricing due to their ability to deal in volume with plumbing services firms.

Our residential and commercial Reverse Osmosis filtration systems remove 95% of dissolved contaminants from tap water. Get healthier now from $1 per day.

Enjoy clean and great-tasting water straight from your faucet! Aquasana offers drinking water filters, shower filters & whole house systems at an amazing ...

Permit Services is open Monday-Friday, 7 a.m.-4 p.m. except Wednesdays, 7 a.m.- Noon. Call us at 301-206-4003 for more information.

backflowtesting是什么

Not a very common item for any household and with the advent of digital photograph, photo developers and sinks are certainly a rarity these days. But when connected to the water distribution system, backflow prevention is a must. If connected to a tank or sink, a “non-testable” device (standard no. ASSE 1012), may be utilized. If chemical injection is present or an automatic developer is used, a “testable” assembly (standard no. ASSE 1013), must be installed and special provisions for drainage need to be considered and yearly testing by a plumber is mandatory.

TASKI machines with IntelliFlow use speed-dependent application technology to always deliver a consistent amount of solution, decreasing the number of tank ...

Piston sensed pressure reducing regulators for use in providing a stable pressure to precision pressure control devices.

Consult with a licensed plumber regarding proper connection and protection requirements or contact a WSSC Water inspector by phone or email: 301-206-8886 or plumbingplansreview@wsscwater.com.

2024612 — A hot water recirculating pump attaches to your water heater. It circulates hot water throughout your pipes to keep it readily available at the ...

backflowpreventer中文

Installation, repair, replacement and/or annual testing must be performed by a plumbing services firm (licensed plumber). Their plumbers must be at least of the “Journeyman” license level and also possess a separate cross connection technician certification. Do not be afraid to ask for proof!

2018712 — ... Febco, Watts, Wilkins. B. Hose Connection Vacuum Breakers: ASSE 1011, brass or bronze construction, EPDM diaphragm and seat, rated for 125 ...

Modern plumbing fixtures generally have built-in backflow protection. For instance, a faucet spout terminates above the flood rim level of the sink or tub. So if the sink or tub is full of dirty water or worse, backed-up sewage, there is no possible way for a backflow because of the air gap created by the elevated spout. Toilet fill valves, clothes washers, dishwashers, and refrigerator/ice makers also employ some type of built-in air gap as their method of protection.

Kitchen and lavatory faucets, constructed within the US, with integral or auxiliary spray heads, generally do not need additional backflow prevention devices.

WSSC Water offers five ways to pay your bill: Online, by Phone, by Mobile App, by Drive-Thru, by Mail and in Person. Go to Pay My Bill for more information.

Because of their portability and universal ease of connection, general purpose/garden hoses pose one of the greatest risks for backflow occurrences. In addition, there is a general complacency (underestimation of hazard level), with what hoses are connected to or with what they are left submerged in.

Automatic irrigation systems pose a significant threat to the drinking water system. By their nature, sprinkler heads may reside in a pool of yard/animal waste, pesticides and/or fertilizers. And because the supply lines are under constant pressure and flow, and controlled by underground control valves, a typical vacuum breaker is not an appropriate form of protection against backflow. There are two types of backflow prevention assemblies allowed:

In residential applications, the normal way to protect the drinking water system from the hose, and its uses, is to outfit the hose bibb (spigot/valve) with a vacuum breaker. Hose bibbs are available with integral vacuum breakers or vacuum breakers can be purchased separately and screwed directly onto the outlet threads of the bibb. In this case, the vacuum breaker, in turn, has hose threads to connect the hose to. Vacuum breakers are very inexpensive but provide a very good level of protection against backflow.

Have “non-testable” backflow devices replaced at the intervals described above. Have “testable” backflow assemblies tested yearly and rebuilt or replaced as needed.

Understanding and respecting the risk of water contamination is a great start, when in doubt, seek help. Basic guideline: every water outlet needs some form of protection; get to know what is needed.

If you're experiencing a water emergency, such as a broken water main, or a sewer emergency, report it using our mobile app, email the Emergency Services Center, or call us at 301-206-4002.

Compact, light-weight, direct-acting pressure reducing valves. Stainless steel construction. Clean Steam Direct-Acting Pressure Reducing Valve

We're here to help. Eligible residential customers may start a pay plan or learn more about all of the financial assistance resources. Get started by going to Flexible Pay Plans.