Dielectric UnionStainless steel

This 2 in lead-free brass water pressure reducing valve for high pressure ranges is designed to reduce incoming water pressure to protect plumbing systems ...

On-demand hot water recirculating systems allow you to use hot water in the most efficient way possible. What these systems do is record your daily water usage ...

Dielectricinsulated unions

Expansion tanks work by equalizing pressure throughout the system. An expansion tank is a small tank divided in two sections by a rubber diaphragm. One side is connected to the pipes of the heating system and contains water. The other side is dry and contains pressurized air, set at approximately 12 psi. As hot water enters the heating system, the pressure in the system increases. As pressure increases, the diaphragm in the expansion tank is pushed down. This compresses the air in the tank, creating more space for excess water to enter. This relieves excess pressure in the system and prevents pipes in the system from being damaged.

An expansion tank is designed to relieve pressure in both potable water and closed hydronic heating systems. It ensures that constant pressure is maintained within the pipes so they do not get damaged from excess pressure. “An expansion tank in a heating system is an invaluable component that protects the entire system from the increased pressure and volume caused by heating,” asserts Daniel O’Brian, a technical expert from online retailer SupplyHouse.com.

Articles may contain affiliate links which enable us to share in the revenue of any purchases made. Registration on or use of this site constitutes acceptance of our Terms of Service.

Dielectric Unionfor electrical conduit

Noritz technology integrates hot water recirculation pumps with our tankless units. We also offer an external hot water recirculation pump as an accessory.

“When water is heated, it expands,” O’Brian explains. “In a closed heating system there is only so much space in the pipes and the boiler. If the water is taking up more space and has nowhere to go, the pressure will increase and possibly damage the system, generally at its weakest points, until a leak or even a burst pipe results. An expansion tank is designed to relieve the stress, thereby increasing the life of the components in your entire heating system.”

Donna Boyle Schwartz is an avid writer with years of experience covering the home and garden beat in addition to out-of-home topics such as sports and local events. These days, she researches and writes editorial and advertising features on a vast range of home-related topics, including housewares, furniture, home fashions, flooring, remodeling, construction, antiques, art, garden, collectibles, and color/design trends.

Swagelokdielectric union

It is a high precision and safe static balancing valve that combines the features of flow regulation valve, line shut-off valve and flow measurement point with ...

Do I need adielectric unionfor copper to stainless steel

If your home already has an expansion tank in place, you may want to check it periodically to make sure that the tank is functioning. To check if the expansion tank is working properly, simply place your hand on the tank and feel its temperature. The top portion of the tank should feel warm to the touch, and the bottom portion of the tank should be room temperature. If the entire tank is warm, it is likely that the tank has completely filled with hot water, which occurs only if the diaphragm fails. If this happens, the tank must be replaced immediately.

Expansion tanks vary in capacity, ranging from tanks that hold as little as two gallons to large tanks that hold several hundred gallons. To determine the size needed for your system, online retailer SupplyHouse.com offers a handy Expansion Tank Sizing Calculator on its Web site. Use it to determine the size and model of the expansion tank that’s best suited for your system.

Online retailer SupplyHouse.com offers a large selection of expansion tanks and accessories from the top manufacturers in the industry. To learn more, watch the video below or visit SupplyHouse.com.

Dielectric unionFor gas piping

This WaterPEX tubing is a cross-linked polyethylene tubing used for potable water applications. It is tough, flexible, and corrosion proof, ...

Homeowners looking to maximize the efficiency and life expectancy of their heating and cooling systems may want to consider installing an expansion tank as an easy and inexpensive means of regulating water pressure and preventing costly damage to other components, including pipes.

Brassdielectric union

WattsDielectric Union

... Ames C400/ C500. $387.45. Add to cart. Ames 7010025. Watts 0889374 – 1st Check Repair Kit for 6″ 957/957RPDA or Ames C400. $636.10. Add to cart. WATTS 899236 ...

A pressure regulator is a spring-loaded valve that regulates pressure on the downstream (house) side of the valve.

Prices for expansion tanks start at about $30 for small residential tanks and climb up to $800 to $1,000 for larger, commercial tanks. Leading brands include Extrol expansion tanks, manufactured by Amtrol, which are used for hydronic heating systems; the Watts ET series and Bell & Gossett HFT expansion tanks, both designed for use with closed hydronic heating systems; and Therm-X-trol expansion tanks, for use with potable water open systems.

These weather compensation controllers measure the temperature outside the building and vary the temperature of the water pumped into the heating systems ...

Your source for water filtration! Premier water has reverse osmosis systems, salt-free anti-scale prevention, ultraviolet and home water filtration systems.

Installing an expansion tank is a relatively simple process that can typically be completed in less than an hour by a handy do-it-yourselfer. Some local building codes may require installation by a licensed plumber, however, so you should check with your municipal building department before proceeding with any installation.

Mueller Steam Specialty 1491 NC Hwy 20 W St. Pauls, NC 28384 Tel 800-334-6259 Fax 910-865-8245 VISIT SITE