T&Pvalve

Innovative push-to-connect design on outlet allows for quick and easy installation on copper & CPVC drain lines. Incorporates an inert thermal element coating that provides effective isolation from mineral deposits (liming) and galvanic corrosion. Comes with standard factory settings of 150 psi for pressure relief and 210°F (99°C) for temperature relief. Completely automatic and reseats after temperature or pressure relief. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

T&Pvalvevs pressurerelief valve

The Febco line includes Reduced Pressure Principle Valves, Double Check Valve Assemblies and Pressure Vacuum Breakers. Visit the Febco site

Series 765 Pressure Vacuum Breakers are designed to be installed to provide protection against back siphonage of toxic or non-toxic liquids. They feature a durable bronze body and a check valve and air opening port in one assembly. Maximum Working Pressure: 150psi (10.3 bar).

WARNING! Irrigation systems supplied by domestic or private potable water systems are considered to be a potential pollution hazard to the water supply. These systems must include protection to prevent possible backflow of irrigation water into the potable water supply. Federal law requires a proper backflow device to be installed on any watering system to prevent contamination of the supply; whether it be pump or city water. Check your local water authority for installation requirements & codes. In many rural areas; specific requirements for landscape irrigation systems may not be covered in local plumbing codes and/or enforcement may be limited. HOWEVER...limitation in local authority does not alter the basic requirement for protection of the potable water supply.