4 Way Gas Manifold (Gas Splitter) - gas line splitter

 2024-10-25 01:22:17

Hotwater recirculating pumpwith return line

Type of Hot Water Heater: Tankless Outdoor Type of Household Plumbing: Dedicated_Return Max GPM Flow: 17gpm Max Head Feet: 11ft Material: Stainless Steel Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH2K-7X Instruction SheetSubmittal Data SheetBrochure AQUA-SHIELD™ AMH2K-7X -Dedicated Return Line AMH2K-7X for Outdoor tankless with less than .4 GPM flow requirement (union body) Includes: AM7-SUV1AXLT1 and UK75T 3/4″ Threaded Male Fittings For Outdoor Installed Tankless Heater without built-in Pump on Dedicated Return Line Primary Market Southern Tier of the US Outdoor installation saves on expensive air intake, exhausts Easy to service outdoor installed pump Pump freeze protected and water and sprinkler safe Greater choice of tankless models Automatic, built-in thermostat/switch designed for hot climate (115-125 F degrees), timer and 10 ft. line cord Clear cover with Timer visibility Meets Title 24 California (only with Aquastat) Aqua-Shield™ Pat. Pending

FK75 Submittal Data Sheet 3/4″ NPT, Includes Two Cast Iron Flanges, Four Bolts, Four Nuts, Two Square Gaskets. Flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench Fits AquaMotion models AM5, AM7, AMR, AM10

Max GPM Flow: 20gpm Max Head Feet: 11ft Material: Stainless Steel Connection Type: Flange, 2_Bolt_Flange Pump Speed: Single Speed AM7-SF1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of just 0.60 amps the AM7 offers high performance and high efficiency. The AM7 operates at 18% higher efficiency than leading competitors circulators. The AM7-SF1 uses standard 2-bolt circulator flanges for easy installation. Our AM7 circulator replaces Taco 007 and other model circulators.

FK75S Submittal Data Sheet 3/4″ NPT, Includes Two Stainless Steel Flanges, Four Bolts, Four Nuts, Two Square Gaskets. Flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench Fits AquaMotion models AM5, AM7, AMR, AM10

With an Amp draw of just 0.60 amps the AM7 offers high performance and high efficiency. The AM7 operates at 18% higher efficiency than leading competitors circulators. The AM7-SF1 uses standard 2-bolt circulator flanges for easy installation.

For TANKLESS HEATER WITHOUT BUILT-IN PUMP for Single Pipe Systems AM6 AquaMotion Stainless Steel Circulator with a built-in timer and a 10 Ft line cord. AMK-ODR bypass valve kit (ODR Valve, 2 Ft. Stainless Steel Hose & Tee), Bypass Tee 3/4” MNPT x 3/4” MNPT x 3/8” OD Compression Two 3/4″ NPT Male Tail Pieces with 1” Union Nuts and Gaskets, 2 Ft. Stainless Hose.The AquaMotion ODR Valve is a small, quiet, lead free stainless/brass hot water recirculation valve for single pipe systems. It installs at the fixture furthest from the tankless hot water heater. It acts in conjunction with the circulator to supply hot water using the Built-in Timer. The ODR Valve mounts below the fixture between hot and cold supply lines. When hot water is called with the Built-in Timer, the circulator forces the cooled hot water in the hot water line into the cold supply line which returns it to the hot water heater. As hotter water reaches the ODR Valve it closes until a 95°F temperature is reached at which point the valve automatically adjusts to maintain this temperature.

Regularly scheduling professional steam boiler inspections is the best way to catch potential issues before they become major setbacks.

Max GPM Flow: 7gpm Max Head Feet: 4ft Material: Stainless Steel Connection Type: NPT Pump Speed: Single Speed Corded: Yes AM3-ST1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ With an Amp draw of only 0.46 amps the AM3 3/4″ NPT offers high performance and high efficiency. All stainless steel models are fully lead free. Circulator comes with Line Cord and Timer. Our AM3 circulator replaces Taco 003 models and other model circulators.

Type of Hot Water Heater: Tankless Outdoor Type of Household Plumbing: Single_Pipe Material: Stainless Steel Connection Type: 2_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH1K-RODRXT1 Instruction SheetSubmittal Data SheetBrochure AQUA-SHIELD™ AMH1K-RODRXT1 Single Pipe with On Demand AQUA-SHIELD™ Circulator for Outdoor installation. Installs on TANKLESS HEATER WITHOUT BUILT-IN PUMP FOR SINGLE PIPE INSTALLATION, USE WITH ON DEMAND- For up to 600 Ft. of total pipe length and tankless for all minimum flow rates. Stainless high speed circulator, flanged, 10 ft. line cord, with outdoor enclosure, for water, sprinkler, bug and anti-tampering locking device tab. Timer set to “On” only. AMK-ODR bypass valve kit (maintains 95F degrees) installs under fixture, Includes AMK-WB ON DEMAND-FK75S 3/4″ Stainless Flanges Included. Patent pending. – . Meets CA Title 24 with On Demand. Freeze protection does not work with this model because of the On Demand Kit. Aqua-Shield Outdoor Tankless Single Pipe for up to 600 ft. of total pipe with On Demand

With an Amp draw of just 0.54 amps the AM5 offers high performance and high efficiency. The AM5-SF1 uses standard 2-bolt circulator flanges for easy installation.

With an Amp draw of just 0.60 amps the AM7 offers high performance and high efficiency. The AM7 operates at 18% higher efficiency than leading competitors circulators. The AM7-FV1 uses standard 2-bolt circulator flanges for easy installation.

How does a hotwater recirculating pumpwork

Type of Hot Water Heater: Tank Type of Household Plumbing: Dedicated_Return Material: Stainless Steel Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH2K-7 Instruction SheetSubmittal Data SheetBrochure AMH2K-7 is designed for dedicated return line systems with standard water heater. Good for up to 250 feet of total pipe length. Built-in Aquastat that senses water temperature (On at 85F/ Off at 105F degrees) to minimize run time. Save up to 15,000 gallons of water per year for a family of 5 Kits include 1 AM7-SUVA1LT1 pump, 10 foot cord, (2) 3/4″ NPT male Union Tail Pieces, (2) Union Nuts, (2) Union Gaskets Built-in Mechanical Timer Meets Title 24 California

With an Amp draw of only 0.54 amps the AM6 offers high performance and high efficiency. The SUCV1 features union connections with 1/2″ bronze sweat fittings. All stainless steel models are fully lead free.

Max GPM Flow: 17gpm Max Head Feet: 21ft Material: Stainless Steel Connection Type: Flange, 4_Bolt_Flange Pump Speed: Three Speed AMR-S3F1 Instruction SheetSubmittal Data SheetCurvesBrochure With Amp draws ranging from 0.46 amps to 0.79 amps the AMR offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation. The AMR circulator replaces Grundfos model UPS15-58, Taco 00R, Taco 0015, and Wilo STAR S21 and other model circulators.

Kit includes: Stainless pump with 3/4″ FNPT union, built-in timer, 10 ft. line cord, bronze by-pass valve (with check valve), 2 ft. NSF hose & Tee

FK125S Submittal Data Sheet 1-1/4″ NPT, Includes Two Stainless Steel Flanges, Four Bolts, Four Nuts, Two Square Gaskets. Flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench Fits AquaMotion models AM5, AM7, AMR, AM10

Hotwater recirculating pumpwithout return line

SKU F111643 {A}. Description: Series LF957RPDA-FS reduced pressure detector assembly backflow preventers provide protection to the potable water system from ...

Max GPM Flow: 12gpm Max Head Feet: 18ft Material: Stainless Steel Connection Type: 4_Bolt_Flange Pump Speed: Single Speed AM8-SF1 Instruction SheetSubmittal Data SheetCurvesBrochure AM8 Stainless 4 bolt flange

Aqua-Shield™ Circulator for Outdoor Installation. Installs on Tankless Heater without built-in pump for Single Pipe Installation. For up to 250 ft. of total pipe length and tankless Flow requirement of .4 GPM or less

Short lay length and compact design allow it to install in tight spaces. High-flow capacity suits commercial or industrial pressure reduction applications.

Understanding common steam boiler issues like low water conditions can better equip you and your team to handle concerns that arise. Adequate water levels are vital to boiler operation and safety. Low water conditions in your boiler occur when it fails to replace the water as it evaporates.

AMK-ODR Valve Kit Instruction SheetSubmittal Data SheetBrochure The AquaMotion ODR Valve is a small, quiet, lead free stainless/brass hot water recirculation valve for single pipe systems. It installs at the fixture furthest from the tankless hot water heater. It acts in conjunction with a circulator to supply hot water ON DEMAND or Built-in Timer on pump. The ODR Valve mounts below the fixture between hot and cold supply lines. When hot water is called for using an On-Call control or Built-in Timer, the circulator forces the cooled hot water in the hot water line into the cold supply line which returns it to the hot water heater. As hotter water reaches the ODR Valve it closes until a 95°F temperature is reached at which point the valve automatically adjusts to maintain this temperature. A Hot Water Circulator must be installed at the tankless.

With an Amp draw of only 0.54 amps the AM6 offers high performance and high efficiency. The ST1 features internally threaded NPT connections, but other models are available with sweat fittings. All stainless steel models are fully lead free.

Max GPM Flow: 31gpm Max Head Feet: 12ft Material: Cast Iron Connection Type: Flange, 4_Bolt_Flange Pump Speed: Three Speed AM10-3F1 Instruction SheetSubmittal Data SheetCurvesBrochure With Amp draws ranging from 0.45 amps to 0.75 amps the AM10 offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation. The AM10 circulator replaces Taco 0010 circulators and other circulator models.

Type of Hot Water Heater: Tank Type of Household Plumbing: Single_Pipe Material: Stainless Steel Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH3K-7N Instruction SheetSubmittal Data SheetBrochure AMH3K-7N is designed for standard plumbing systems with hot water pipe length up to 250ft of total pipe length for hot water tanks Fully automatic system installs under sink Requires electrical outlet at sink No cutting of pipe Uses Built-In non-adjustable Aquastat (On at 85F/ Off at 105F degrees) Add On Demand Kit (5 Minute Run Timer) to turn On Meets Title 24 California

Type of Hot Water Heater: Tankless Indoor Type of Household Plumbing: Single_Pipe Material: Stainless Steel Pump Speed: Single Speed Corded: Yes AMH1K-7ODRN Instruction SheetBrochure AQUA-ON DEMAND™ for TANKLESS HEATER (N) NO TIMER- USE WITH ON DEMAND CONTROL– For up to 100 Ft. of total pipe length and tankless minimum Flow Rate of .4 GPM or less AM7-SUEV1L Stainless Union circulator, Built-In check valve, 1” union with ¾” extended tailpieces with flat for mounting,with 10 ft. line cord, includes the AMK-ODR valve kit with Bypass valve on/off 95°-104°F, hose, Tee. The ODR valve installs on the cold angle stop. AMK-WB On Demand Remote RF Wireless Control with Adjustable Receiver and Cord. -No Wiring Required, up to 5 AMK-WB or AMK-MS or AMK-WS or mixed per Receiver Meets Title 24 California

Max GPM Flow: 7gpm Max Head Feet: 4ft Material: Stainless Steel Connection Type: Union_Half, Union Check Valve: Yes Pump Speed: Single Speed AM3-SUCV1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of only 0.46 amps the AM3 offers high performance and high efficiency. The SUCV1 features union connections with 1/2″ bronze sweat fittings. All stainless steel models are fully lead free. Circulator comes with BICV™ built in check valve. Our AM3 circulator replaces Taco 003 models and other model circulators.

Max GPM Flow: 16gpm Max Head Feet: 21ft Material: Stainless Steel Connection Type: 4_Bolt_Flange Check Valve: Yes Pump Speed: Three Speed Corded: Yes AMR-S3FV1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ AMR Stainless 4 bolt flanged 3 Speed pump with BICV, line cord and timer.

Hotwater recirculating pumpreddit

AM10-SF2, TwinTurbo Stainless Steel, HeadFt:21 GPM:24 AM10-SFV2, TwinTurbo Stainless Steel with check valve, HeadFt:21 GPM:23

Max GPM Flow: 16gpm Max Head Feet: 9ft Material: Stainless Steel Connection Type: Flange, 2_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed AM5-SFV1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of just 0.54 amps the AM5 offers high performance and high efficiency. The AM5-SF1 uses standard 2-bolt circulator flanges for easy installation. Circulator comes with BICV™ built in check valve. Our AM5 circulator replaces Taco 005 and other model circulators.

Hotwater recirculating pumpinstallation diagram

A typical low water cutoff (LWCO) is a floating system within the boiler that rises and falls with the water levels. When the water level falls too low, LWCOs will automatically shut the boiler off to prevent damage. LWCOs are typically triggered when the water level falls within a few inches of the boiler’s tubes, as exposure can lead to several tubing issues.

AMK-T Instruction Sheet Digital Timer with adjustable 7-day functions, as well as power failure protection that keeps its settings even after power outage or when unplugged

AMK-WB Instruction Sheet On-Demand Wireless Control Kit – Wireless Button and Receiver (Button available separately AMK-WBR)

AM55-SFVL Stainless Steel Circulator has an Amp draw of only 0.07 to 0.57 amps, and watt consumption of just 5-38 watts the Einstein is the most energy efficient ECM on the market. This pump features 3 fixed speeds, 4 variable speeds and a night set back to maximize energy savings. It has a universal 4-bolt flange design reduces inventory and cost while simplifying installation.

Even with the best preventive care and maintenance, boilers don’t last forever, and a time may come when you need a replacement. Look for signs that your boiler may need to be replaced, including odd or loud noises, decreased efficiency or expensive upkeep. Whether your boiler simply aged out or there’s a sudden break, knowing when to replace it and what to consider when doing so is essential.

Max GPM Flow: 12gpm Max Head Feet: 18ft Material: Cast Iron Connection Type: 4_Bolt_Flange Pump Speed: Single Speed AM8-F1 Instruction SheetSubmittal Data SheetCurvesBrochure AM8 Cast Iron 4 bolt Flange

The new AMK-UK brass and stainless valve kit with bi-metal coil provides 90° F hot water to every faucet. It does not require power under the sink

PRV15F PRV 15mm Range 150Kpa - 600 Kpa AVG > Pressure Reduction Valves.

Replace your Febco 765 PVB Backflow with ease using Blue Heron's 1-1/4 inch Bonnet and Poppet Repair Assembly Kit. Warranty included. Shop at Ubuy Kenya.

Max GPM Flow: 5gpm Max Head Feet: 10ft Material: Stainless Steel Connection Type: NPT Pump Speed: Single Speed AM1-ST1 Instruction SheetSubmittal Data SheetCurvesBrochure AM1 Stainless 3/4″ NPT (Replaces AM2)

Boilers can fail even with LWCO systems in place, so maintaining your boiler is essential to further helping prevent damage and keeping the boiler in efficient condition. Consistent steam boiler maintenance can extend your unit’s life and keep it working effectively for a long time. Here are a few maintenance tips to keep your steam boiler in optimal condition and prevent low water damage.

Material: Cast Iron Connection Type: Flange Check Valve: Yes Pump Speed: Single Speed TwinTurbo Instruction SheetSubmittal Data SheetBrochure TwinTurbo Cast Iron or Stainless Steel: 2 AMR or 2 AM10 Pumps wired together set on medium or high speed. Benefits and features: More competitively priced than Higher horsepower single pumps with similar performance Two pumps in series doubles the pressure output of a single pump Pre-wired in series, installation wiring is the same as a single unit Duel pumps allow one to be operated alone or both together On solar drain back systems, both pumps can be used to fill the system and one turned off during operation. Four bolt flange pattern, 12 1/2” flange to flange dimensions for easy installation in new or existing installations Available with or without built in Check Valve (add “V” to part number, i.e. AMR-FV3) Available in Cast Iron and Stainless Steel Construction AMR-F3, TwinTurbo Cast Iron, HeadFt:41 GPM:17 AMR-FV3, TwinTurbo Cast Iron with check valve, HeadFt:41 GPM:16 AMR-F2, TwinTurbo Cast Iron, HeadFt:36 GPM:14 AMR-FV2, TwinTurbo Cast Iron with check valve, HeadFt:36 GPM:13 AM10-F3, TwinTurbo Cast Iron HeadFt:24 GPM:29 AM10-FV3, TwinTurbo Cast Iron with check valve HeadFt:24 GPM:28 AM10-F2, TwinTurbo Cast Iron, HeadFt:21 GPM:24 AM10-FV2, TwinTurbo Cast Iron with check valve, HeadFt:21 GPM:23

Max GPM Flow: 20gpm Max Head Feet: 21ft Material: Stainless Steel Connection Type: Flange, 4_Bolt_Flange Check Valve: Yes Pump Speed: Variable Speed Corded: Yes AM55-SFVL Instruction SheetSubmittal Data SheetBrochure AM55-SFVL Stainless Steel Circulator has an Amp draw of only 0.07 to 0.57 amps, and watt consumption of just 5-38 watts the Einstein is the most energy efficient ECM on the market. This pump features 3 fixed speeds, 4 variable speeds and a night set back to maximize energy savings. It has a universal 4-bolt flange design reduces inventory and cost while simplifying installation. Circulator comes with BICV™ built in check valve. The Einstein circulator replaces the Taco oo7 oo7e 0015 0015e3 1816e 0018e, VR1816, VT2218 Grundfos 15-42, 15-58, Alpha I & II and others with one single model.

For example, consider if a boiler has any safety features or components that help reduce the likelihood or severity of common boiler issues. Some boilers won’t start if you try to bypass their built-in safety measures, reducing the risk of small issues becoming major problems. Also, consider whether certain components like tubing are designed to withstand high temperatures and pressure. Most are, though this is a necessity, so you wouldn’t want to sacrifice this.

Max GPM Flow: 16gpm Max Head Feet: 20ft Material: Stainless Steel Connection Type: Flange, 4_Bolt_Flange Check Valve: Yes Pump Speed: Three Speed AMR-S3FV1 Instruction SheetSubmittal Data SheetCurvesBrochure With Amp draws ranging from 0.46 amps to 0.79 amps the AMR offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation. Circulator comes with BICV™ built in check valve. The AMR circulator replaces Grundfos model UPS15-58, Taco 00R, Taco 0015, and Wilo STAR S21 and other model circulators.

Max GPM Flow: 7gpm Max Head Feet: 4ft Material: Stainless Steel Connection Type: Union_Half Check Valve: Yes Pump Speed: Single Speed Corded: Yes AM3-SUCV1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ Stainless AM3 with 1/2″ Union Sweat Fittings, BICV, Line Cord and Timer

To run the circulator with timer at $0.12 per kw is approx. $3.00, $8.00 for the large pump annually. Our hot water recirculation kits have an approx. one to three year payback depending on the size of the installation.

UV Guard HWC-6 Hard Water Conditioner, Large House or Small Commercial (100 lpm) ... Or, if on mains water, it is convenient to install between the water meter ...

Aqua-Ready™ With an Amp draw of only 0.46 amps the AM3 3/4″ NPT offers high performance and high efficiency. All stainless steel models are fully lead free.

With an Amp draw of only 0.54 amps the AM6 offers high performance and high efficiency. The SUEV1 features union connections with 3/4″ bronze sweat fittings. All stainless steel models are fully lead free.

Type of Hot Water Heater: Tankless Indoor Type of Household Plumbing: Single_Pipe Material: Stainless Steel Check Valve: Yes Pump Speed: Three Speed Corded: Yes AMH3K-R Instruction SheetSubmittal Data SheetBrochure AMH3K-R is designed for standard plumbing systems up to 600ft of total pipe length. Fully automatic system installs under sink Rubber mount Requires electrical outlet at sink Uses Built-In non-adjustable Aquastat (On at 85F/ Off at 105F degrees) Built-in Mechanical Timer Meets Title 24 California

Install a proven, awarded AquaMotion recirculation system. One system is available for every type of installation, hot water tanks or tankless.

AQUA-ON DEMAND™ for TANKLESS HEATER WITHOUT BUILT-IN PUMP WITH SINGLE PIPE FOR UP TO 600 FT. OF TOTAL PIPE LENGTH- (N) NO TIMER- INCLUDES AMK-WB ON DEMAND AMR-SFVL1 flanged stainless high speed circulator with 10 ft. line cord, ¾” stainless Female NPT flange kit, AMK-WB On Demand Push Button with Receiver, Includes the AMK-ODR valve kit with valve, hose, Tee. Valve maintains 95°F

US Patents, RTM, 9,864,647, D834, 145, 8,083,500, 8,303, 184, 9,328,736, 10,612, 793, 5,501,838, 4,507,949, 11,193,605. Canadian Patents 2,883,495 & 2,935,949

When deciding whether to buy a boiler, be sure to consider price as a major deciding factor. While you may be able to cover the purchase, be sure to also consider the price of installation, maintenance and operational costs. Investing in maintenance for your boiler may be most cost-efficient than another replacement, though you should be prepared to cover those costs.

Max GPM Flow: 29gpm Max Head Feet: 11ft Material: Stainless Steel Connection Type: 4_Bolt_Flange Check Valve: Yes Pump Speed: Three Speed Corded: Yes AM10-S3FV1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ Stainless AM10 4 Bolt flanged 3 Speed with BICV, line cord and timer.

Max GPM Flow: 11gpm Max Head Feet: 8ft Connection Type: NPT Pump Speed: Single Speed AM6-ST1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ Stainless AM6 with 3/4″ NPT includes Line Cord and Timer.

Renting can be a more convenient option for some facilities. Boiler rentals are ideal for emergency situations. Let’s say your primary boiler is undergoing extensive maintenance or repairs and must be shut down for a week. Rather than pause operations and lose money, you could temporarily rent a boiler to continue operations while your boiler is out of commission. Boiler rentals also offer more flexibility and lower costs, allowing you to plan for the long term and save money, all while continuing operations.

Additional Under-sink bypass valve kits- up to 5 per pump. To be used with AMH1K-3UV AquaMotion , 70600 Nevercold, and FT1 APCOM.

Hot Water with Recirculation Systems: The Comfort and Savings of Instant Hot Water with Recirculation The Innovation Leader in Hot Water Recirculation Technology Hot Water Recirculation Systems: For Retrofit & New Construction The Problem How long do you wait for hot water when you turn on the faucet? 30 seconds, 1 minute, 2 or 3 minutes, longer? While you wait, a home with 5 taps can waste up to 15,000 gallons of tempered water down the drain. You pay for this potable water, wasted energy and sewage fees. The Solution Install a proven, awarded AquaMotion recirculation system. One system is available for every type of installation, hot water tanks or tankless. The Benefits Hot Water Comfort at Every FaucetSave Time, No More Waiting For Hot WaterSave Hot Water, 12,000 – 15,000 Gallons a YearSave Energy with Timer, Save on Utility and Sewer BillsSave More with “ON DEMAND” SystemsGo Green, Help Conserve this Precious Water ResourceMeet local Plumbing Codes The Cost To run the circulator with timer at $0.12 per kw is approx. $3.00, $8.00 for the large pump annually. Our hot water recirculation kits have an approx. one to three year payback depending on the size of the installation. How Does It Work? A pump at the tank or tankless heater, or installed under the sink, forces the lukewarm water from the hot supply line into the cold supply line. If a dedicated return line is used it returns the lukewarm water to the heater. A sensor/switch (Aquastat) built into the pump or an Aqua-Flash® or ODR Superflow™ By-pass valve transfers the lukewarm water into the cold pipe. The valves maintain average 93° F (34° C) at the sink. The under sink pump starts when temperature drops to 85° F (30° C) and stops when it reaches 104° F (40° C). The pump runs about 3 times an hour for 2 minutes. A built-in 24-hour mechanical timer allows the user to set the time when he wants instant hot water. An ON DEMAND button/motion sensor or app can also activate the system US Patents, RTM, 9,864,647, D834, 145, 8,083,500, 8,303, 184, 9,328,736, 10,612, 793, 5,501,838, 4,507,949, 11,193,605. Canadian Patents 2,883,495 & 2,935,949 Hot Water Recirculation Systems for Any Hot Water Heating System. See Our Recirculation System Kits See Our Recirculation System Accessories Below

Max GPM Flow: 16gpm Max Head Feet: 11ft Material: Stainless Steel Connection Type: NPT Pump Speed: Single Speed Corded: Yes AM7-ST1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ AM7 Stainless 3/4″ NPT with line cord and timer.

FK150 Submittal Data Sheet 1-1/2″ NPT, Includes Two Cast Iron Flanges, Four Bolts, Four Nuts, Two Square Gaskets. Flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench Fits AquaMotion models AM5, AM7, AMR, AM10

Type of Hot Water Heater: Tank Type of Household Plumbing: Dedicated_Return Material: Stainless Steel Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH2K-7N Instruction SheetSubmittal Data SheetBrochure AMH2K-7N is designed for dedicated return line systems with standard water heater. Good for up to 250 feet of pipe length. Built-in Aquastat that senses water temperature (On at 85F/ Off at 105F degrees) to minimize run time. Save up to 15,000 gallons of water per year for a family of 5 Kits include 1 AM7-SUVA1L1 pump, 10 foot cord, (2) 3/4″ NPT male Union Tail Pieces, (2) Union Nuts, (2) Union Gaskets Add On Demand (5 Minute Run time) to turn On. Meets Title 24 California

AM55-FVL Cast Iron Circulator has an Amp draw of only 0.07 to 0.57 amps, and watt consumption of just 5-38 watts the Einstein is the most energy efficient ECM on the market. This pump features 3 fixed speeds, 4 variable speeds and a night set back to maximize energy savings. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation. * Use an iron filter when installing circulator in existing systems to avoid problems with iron oxides.

Max GPM Flow: 29gpm Max Head Feet: 12ft Material: Stainless Steel Connection Type: Flange, 4_Bolt_Flange Check Valve: Yes Pump Speed: Three Speed AM10-S3FV1 Instruction SheetSubmittal Data SheetCurvesBrochure With Amp draws ranging from 0.45 amps to 0.75 amps the AM10 offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation. Circulator comes with BICV™ built in check valve. The AM10 circulator replaces Taco 0010 circulators and other circulator models.

Best hotwater recirculating pump

Visit PlumbMaster.com to see our full line of plumbing products such as 1-1/2 Dia x 2 H Watts Brass Frost Proof Hose Bibb Vacuum Breaker.

AMK-WS Instruction Sheet On-Demand Wireless Control Kit – Wall Switch and Receiver (Switch available separately AM-WSR)

Max GPM Flow: 16gpm Max Head Feet: 11ft Material: Stainless Steel Connection Type: Flange, 2_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed AM7-SFV1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of just 0.60 amps the AM7 offers high performance and high efficiency. The AM7 operates at 18% higher efficiency than leading competitors circulators. The AM7-SF1 uses standard 2-bolt circulator flanges for easy installation. Circulator comes with BICV™ built in check valve. Our AM7-S circulator replaces Taco 007 and other model circulators.

With Amp draws ranging from 0.45 amps to 0.75 amps the AM10 offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation.

Material: Stainless Steel Connection Type: Flange, 4_Bolt_Flange Pump Speed: Single Speed TwinTurbo-S Instruction SheetSubmittal Data SheetBrochure TwinTurbo Cast Iron or Stainless Steel: 2 AMR or 2 AM10 Pumps wired together set on medium or high speed. Benefits and features: More competitively priced than Higher horsepower single pumps with similar performance Two pumps in series doubles the pressure output of a single pump Pre-wired in series, installation wiring is the same as a single unit Duel pumps allow one to be operated alone or both together On solar drain back systems, both pumps can be used to fill the system and one turned off during operation. Four bolt flange pattern, 12 1/2” flange to flange dimensions for easy installation in new or existing installations Available with or without built in Check Valve (add “V” to part number, i.e. AMR-SFV3) Available in Cast Iron and Stainless Steel Construction AMR-SF3, TwinTurbo Stainless Steel, HeadFt:41 GPM:17 AMR-SFV3, TwinTurbo Stainless Steel with check valve, HeadFt:41 GPM:16 AMR-SF2, TwinTurbo Stainless Steel, HeadFt:36 GPM:14 AMR-SFV2, TwinTurbo Stainless Steel with check valve, HeadFt:36 GPM:13 AM10-SF3, TwinTurbo Stainless Steel HeadFt:24 GPM:29 AM10-SFV3, TwinTurbo Stainless Steel with check valve HeadFt:24 GPM:28 AM10-SF2, TwinTurbo Stainless Steel, HeadFt:21 GPM:24 AM10-SFV2, TwinTurbo Stainless Steel with check valve, HeadFt:21 GPM:23

AQUA-SHIELD™ Circulator for Outdoor installation. Installs on TANKLESS HEATER WITHOUT BUILT-IN PUMP FOR SINGLE PIPE INSTALLATION, For up to 250 Ft. of total pipe length and tankless Flow requirement of .4 GPM or less, Stainless single speed circulator with union connections, 10 ft. line cord, with outdoor enclosure, water, sprinkler, bug and anti-tampering locking device tab. Timer set to “On” only. AMK-ODR bypass valve kit (maintains 95 F degrees) installs under fixture, Includes AMK-WB On Demand- UK75T 3/4″ Threaded Male Fittings Included -Meets CA Title 24 with On Demand. Patent pending. Freeze protection does not work with this model because on the On Demand Kit.

Shower Drainage · Wall Niche · Floor Grate · Floor Waste · Shower Base · Moulded Base ... Laundry Trough. Filter and sort. 60 products. Clear all. Filter and sort.

FK125 Submittal Data Sheet 1-1/4″ NPT, Includes Two Cast Iron Flanges, Four Bolts, Four Nuts, Two Square Gaskets. Flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench Fits AquaMotion models AM5, AM7, AMR, AM10

Purchasing a new or refurbished steam boiler may make sense for your facility if you already own a boiler or have consistently high needs for it. For example, if your production line always needs the boiler, you may be better off owning one — or multiple depending on the size of your operation.

Type of Hot Water Heater: Tankless Indoor Type of Household Plumbing: Dedicated_Return Material: Stainless Steel Connection Type: Flange Check Valve: Yes Pump Speed: Three Speed Corded: Yes AMH2K-R Instruction SheetSubmittal Data SheetBrochure AMH2K-R is designed for dedicated return line systems with tankless water heater up to 600 feet of pipe length. Installs near heat source on Return Line Uses Built-In non-adjustable Aquastat (On at 85F/ Off at 105F degrees) Built-in Mechanical Timer Meets Title 24 California

Managing low water in a steam boiler is an important element of boiler maintenance that impacts everything from safety and wear to boiler effectiveness.

SO100S Submittal Data Sheet 1″ Sweat Isolation (shut-off) Flanges: Full Port Ball Valve with 360° Swivel Includes Two Flanges, Four Bolts, Four Nuts, and Two Gaskets. Forged brass body full port for water application 600 PSI Non-Shock WOG Allows draining of the non-pressure side of the valve when closed

The AquaMotion ODR Valve is a small, quiet, lead free stainless/brass hot water recirculation valve for single pipe systems. It installs at the fixture furthest from the tankless hot water heater. It acts in conjunction with a circulator to supply hot water ON DEMAND or Built-in Timer on pump. The ODR Valve mounts below the fixture between hot and cold supply lines. When hot water is called for using an On-Call control or Built-in Timer, the circulator forces the cooled hot water in the hot water line into the cold supply line which returns it to the hot water heater. As hotter water reaches the ODR Valve it closes until a 95°F temperature is reached at which point the valve automatically adjusts to maintain this temperature. A Hot Water Circulator must be installed at the tankless.

SO125S Submittal Data Sheet 1-1/4″ Sweat Isolation (shut-off) Flanges: Full Port Ball Valve with 360° Swivel Includes Two Flanges, Four Bolts, Four Nuts, and Two Gaskets. Forged brass body full port for water application 600 PSI Non-Shock WOG Allows draining of the non-pressure side of the valve when closed

Type of Hot Water Heater: Tankless Outdoor Type of Household Plumbing: Single_Pipe Material: Stainless Steel Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH1K-7ODRXZT1 Instruction SheetSubmittal Data SheetBrochure AQUA-SHIELD™ AMH1K-7ODRXZT1- Single Pipe Aqua-Shield™ Circulator for Outdoor Installation. Installs on Tankless Heater without built-in pump for Single Pipe Installation. For up to 250 ft. of total pipe length and tankless Flow requirement of .4 GPM or less AM7-SU1LXZT1 Stainless Union Circulator with 3/4″ Male Tailpieces, with outdoor enclosure, water, sprinkler, bug, freeze protected, anti-tampering locking device tab, built-in timer, 10 ft. line cord, pump bypass connection, check, flow control, hose, bypass Tee 3/4″ FNPT x 3/4″ MNPT x 3/8″ OD Compression. AMK-ODR bypass valve kit: Bypass valve, hose, Tee. Valve maintains 95° F. Installs under sink on the cold angle stop and no power required under sink. Patented.

With Amp draws ranging from 0.46 amps to 0.79 amps the AMR offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation.

Max GPM Flow: 29gpm Max Head Feet: 12ft Material: Cast Iron Connection Type: Flange Check Valve: Yes Pump Speed: Three Speed AM10-3FV1 Instruction SheetSubmittal Data SheetCurvesBrochure With Amp draws ranging from 0.45 amps to 0.75 amps the AM10 offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation. Circulator comes with BICV™ built in check valve. The AM10 circulator replaces Taco 0010 circulators and other circulator models.

The Einstein circulator replaces the Taco oo7 oo7e 0015 0015e3 1816e 0018e, VR1816, VT2218 Grundfos 15-42, 15-58, Alpha I & II and others with one single model.

AMH3K-7 is designed for standard plumbing systems with hot water pipe length up to 250ft of total pipe length for hot water tanks

Older boilers may not have a low water light — instead, your boiler may have a sight glass that allows you to see into the boiler and determine where the water level sits. The sight glass offers another way to visually gauge the water level, so check it regularly. You and your team should be familiar with what the normal water level looks like through the sight glass so it’s easy to tell when it falls.

Max GPM Flow: 11gpm Max Head Feet: 8ft Material: Stainless Steel Connection Type: Union_Three_Quarter: Union 3/4" Sweat Check Valve: Yes Pump Speed: Single Speed Corded: Yes AM6-SUEV1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ Stainless AM6 with 3/4″ Union Sweat Fittings, BICV, Line Cord and Timer.

Max GPM Flow: 18gpm Max Head Feet: 20ft Material: Connection Type: 2_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMRe-FVL High Efficiency ECM Circulator Instruction SheetSubmittal Data SheetBrochure The NEW AMRe-FVL High Efficiency ECM circulator for heating with IRON GUARD™ is fully automatic, no buttons to push, steel circulator with stainless cartridge. Does not require iron filter in the system to protect the circulator. External iron filter cost as much as the pump. 6 1/2 ft. replaceable line cord included to save money an time on installation. High performance of 20 ft. x 18 GPM, 120/1/60, low 45 watt draw, universal 2 bolt flange with nut retainer, built-in check valve, replaceable cartridge, a green sustainable product. The AMRe replaces the Taco oo7 oo7e 0015 0015e 1816e 0018e, Grundfos 15-42, 15-58, Alpha I & II and others with one single model.

FK100S Submittal Data Sheet 1″ NPT, Includes Two Stainless Steel Flanges, Four Bolts, Four Nuts, Two Square Gaskets. Flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench Fits AquaMotion models AM5, AM7, AMR, AM10

With an Amp draw of only 0.46 amps the AM3 offers high performance and high efficiency. The ST1 features internally threaded NPT connections, but other models are available with sweat fittings. All stainless steel models are fully lead free.

Max GPM Flow: 7gpm Max Head Feet: 4ft Material: Stainless Steel Connection Type: Union_Three_Quarter: Union 3/4" Sweat Check Valve: Yes Pump Speed: Single Speed Corded: Yes AM3-SUEV1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ Stainless AM3 with 3/4″ Union Sweat Fittings, BICV, Line Cord and Timer

SO75S Submittal Data Sheet 3/4″ Sweat Isolation (shut-off) Flanges: Full Port Ball Valve with 360° Swivel Includes Two Flanges, Four Bolts, Four Nuts, and Two Gaskets. Forged brass body full port for water application 600 PSI Non-Shock WOG Allows draining of the non-pressure side of the valve when closed

Type of Hot Water Heater: Tankless Outdoor Type of Household Plumbing: Single_Pipe Material: Stainless Steel Pump Speed: Single Speed Corded: Yes AMH1K-7ODRXT1 Instruction SheetSubmittal Data SheetBrochure AQUA-SHIELD™ Circulator for Outdoor installation. Installs on TANKLESS HEATER WITHOUT BUILT-IN PUMP FOR SINGLE PIPE INSTALLATION, For up to 250 Ft. of total pipe length and tankless Flow requirement of .4 GPM or less, Stainless single speed circulator with union connections, 10 ft. line cord, with outdoor enclosure, water, sprinkler, bug and anti-tampering locking device tab. Timer set to “On” only. AMK-ODR bypass valve kit (maintains 95 F degrees) installs under fixture, Includes AMK-WB On Demand- UK75T 3/4″ Threaded Male Fittings Included -Meets CA Title 24 with On Demand. Patent pending. Freeze protection does not work with this model because on the On Demand Kit.

The AquaMotion ODR Valve is a small, quiet, lead free stainless/brass hot water recirculation valve for single pipe systems. It installs at the fixture furthest from the tankless hot water heater. The ODR Valve mounts below the fixture between hot and cold supply lines. When hot water is called with the Built-in Timer, the circulator forces the cooled hot water in the hot water line into the cold supply line which returns it to the hot water heater. As hotter water reaches the ODR Valve it closes until a 95°F temperature is reached at which point the valve automatically adjusts to maintain this temperature.

Aqua-Max™ APB30 boosts domestic water pressure in residential homes by 30 psi to all fixtures and sprinkler heads. Use it where the city/ town/ well water delivers insufficient pressure. Automatically Starts when water is drawn & stops when demand ends, No Short Cycling increases pressure after water demands ends, Simple Installation plumbs into incoming water line & plugs into 115V wall fixture, Compact Design easy installation 14″ x 14″ x 11″, Quiet Operation totally enclosed fan cooled motor, Stainless Steel Pump Construction for corrosion resistance & reliability, Composite Control with reinforced brass connections, Built in check valve eliminates back flow of cold to main, Mounting Base can be attached to floor or wall, Wash down Enclosures control and motor are sealed to prevent water entry, Drain and Fill Plugs for quick filling and venting. 1/2 hp and 3.3 Amps

How long do you wait for hot water when you turn on the faucet? 30 seconds, 1 minute, 2 or 3 minutes, longer? While you wait, a home with 5 taps can waste up to 15,000 gallons of tempered water down the drain. You pay for this potable water, wasted energy and sewage fees.

Tankless hotwater recirculating pump

FK100 Submittal Data Sheet 1″ NPT, Includes Two Cast Iron Flanges, Four Bolts, Four Nuts, Two Square Gaskets. Flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench Fits AquaMotion models AM5, AM7, AMR, AM10

AM10-SF3, TwinTurbo Stainless Steel HeadFt:24 GPM:29 AM10-SFV3, TwinTurbo Stainless Steel with check valve HeadFt:24 GPM:28

Type of Hot Water Heater: Tankless Indoor Type of Household Plumbing: Dedicated_Return Material: Stainless Steel Check Valve: Yes Pump Speed: Three Speed Corded: Yes AMH2K-RN Instruction SheetSubmittal Data SheetBrochure AMH2K-RN is designed for dedicated return line systems with tankless water heater up to 600 feet of total pipe length. Installs near heat source on Return Line Uses Built-In non-adjustable Aquastat (On at 85F/ Off at 105F degrees) Add On Demand Kit (5 Minute Run Time) to turn On Meets Title 24 California

Max GPM Flow: 31gpm Max Head Feet: 12ft Material: Stainless Steel Connection Type: Flange, 4_Bolt_Flange Pump Speed: Three Speed AM10-S3F1 Instruction SheetSubmittal Data SheetCurvesBrochure With Amp draws ranging from 0.45 amps to 0.75 amps the AM10 offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation. The AM10 circulator replaces Taco 0010 circulators and other circulator models.

Max GPM Flow: 11gpm Max Head Feet: 8ft Material: Stainless Steel Connection Type: Union_Three_Quarter: Union 3/4" Sweat, Union Check Valve: Yes Pump Speed: Single Speed AM6-SUEV1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of only 0.54 amps the AM6 offers high performance and high efficiency. The SUEV1 features union connections with 3/4″ bronze sweat fittings. All stainless steel models are fully lead free. Circulator comes with BICV™ built in check valve. Our AM6 circulator replaces Taco 006 models and other model circulators.

LWCO systems may also use probes or a combination of floaters and probes. The probes sit in the water and shut off the boiler when the water reaches a certain level. While most boilers today come standard with LWCOs, your older boilers may not have them. In this case, you should have a professional install them for peace of mind.

Max GPM Flow: 18gpm Max Head Feet: 9ft Material: Stainless Steel Connection Type: Flange, 2_Bolt_Flange Pump Speed: Single Speed AM5-SF1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of just 0.54 amps the AM5 offers high performance and high efficiency. The AM5-SF1 uses standard 2-bolt circulator flanges for easy installation. Our AM5 circulator replaces Taco 005 and other model circulators.

With an Amp draw of only 0.46 amps the AM3 offers high performance and high efficiency. The SUEV1 features union connections with 3/4″ bronze sweat fittings. All stainless steel models are fully lead free.

Max GPM Flow: 29gpm Max Head Feet: 11ft Material: Stainless Steel Connection Type: 4_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed AM10-SFV1 Instruction SheetSubmittal Data SheetCurvesBrochure AM10 Stainless 4 bolt flange with built-in check valve

Type of Hot Water Heater: Tankless Indoor Type of Household Plumbing: Single_Pipe Max GPM Flow: 16gpm Max Head Feet: 20ft Material: Stainless Steel Connection Type: 4_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH1K-RODRN Instruction SheetBrochure AQUA-ON DEMAND™ for TANKLESS HEATER WITHOUT BUILT-IN PUMP WITH SINGLE PIPE FOR UP TO 600 FT. OF TOTAL PIPE LENGTH- (N) NO TIMER- INCLUDES AMK-WB ON DEMAND AMR-SFVL1 flanged stainless high speed circulator with 10 ft. line cord, ¾” stainless Female NPT flange kit, AMK-WB On Demand Push Button with Receiver, Includes the AMK-ODR valve kit with valve, hose, Tee. Valve maintains 95°F The AquaMotion ODR Valve is a small, quiet, lead free stainless/brass hot water recirculation valve for single pipe systems. It installs at the fixture furthest from the tankless hot water heater. The ODR Valve mounts below the fixture between hot and cold supply lines. When hot water is called with the Built-in Timer, the circulator forces the cooled hot water in the hot water line into the cold supply line which returns it to the hot water heater. As hotter water reaches the ODR Valve it closes until a 95°F temperature is reached at which point the valve automatically adjusts to maintain this temperature. Meets Title 24 California

While you should only have trained individuals monitor and service your boiler, even the most knowledgeable people can overlook potential concerns. Some modern boilers feature advanced controls and monitoring capabilities that can help you effectively monitor and address boiler issues. Boilers with monitoring and smart controls are beneficial because they can help your team catch issues that may be difficult to identify. Boiler monitoring can also send alerts when potential issues are detected, notifying you and your team before the problem escalates.

The Bluelight LED Lining System is the most advanced light-curing system available for laterals and small drain pipes. This innovative, automated technology ...

With an Amp draw of only 0.46 amps the AM3 offers high performance and high efficiency. The SUCV1 features union connections with 1/2″ bronze sweat fittings. All stainless steel models are fully lead free.

SO75T Submittal Data Sheet 3/4″ NPT Isolation (shut-off) Flanges: Full Port Ball Valve with 360° Swivel Includes Two Flanges, Four Bolts, Four Nuts, and Two Gaskets. Forged brass body full port for water application 600 PSI Non-Shock WOG Allows draining of the non-pressure side of the valve when closed

Max GPM Flow: 29gpm Max Head Feet: 11ft Material: Cast Iron Connection Type: 4_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed AM10-FV1 Instruction SheetSubmittal Data SheetCurvesBrochure AM10 Cast Iron 4 bolt Flange with built-in check valve

AMH2K-7 is designed for dedicated return line systems with standard water heater. Good for up to 250 feet of total pipe length.

Max GPM Flow: 16gpm Max Head Feet: 9ft Material: Cast Iron Connection Type: Flange, 2_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed AM5-FV1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of just 0.54 amps the AM5 offers high performance and high efficiency. Circulator comes with BICV™ built in check valve. Our AM5 circulator replaces Taco 005 and other model circulators.

SO125T Submittal Data Sheet 1-1/4″ NPT Isolation (shut-off) Flanges: Full Port Ball Valve with 360° Swivel Includes Two Flanges, Four Bolts, Four Nuts, and Two Gaskets. Forged brass body full port for water application 600 PSI Non-Shock WOG Allows draining of the non-pressure side of the valve when closed

With an Amp draw of just 0.60 amps the AM7 offers high performance and high efficiency. The AM7 operates at 18% higher efficiency than leading competitors circulators. The AM7-F1 uses standard 2-bolt circulator flanges for easy installation.

The AMRe replaces the Taco oo7 oo7e 0015 0015e 1816e 0018e, Grundfos 15-42, 15-58, Alpha I & II and others with one single model.

Max GPM Flow: 11gpm Max Head Feet: 18ft Material: Stainless Steel Connection Type: 4_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed AM8-SFV1 Instruction SheetSubmittal Data SheetCurvesBrochure AM8 Stainless 4 bolt flange with built-in check valve

Connection Type: Union_Three_Quarter: Union 3/4" Sweat, Union UK75 Sweat Union Kit for Stainless Union Pumps Instruction SheetSubmittal Data SheetCurvesBrochure Two Unions with two 3/4″ Sweat Tail Pieces, Gaskets

Like any machine, boilers require professional inspections to operate properly. While your team should conduct visual inspections daily, professional inspections should be scheduled annually. Professionals can identify weaknesses in the boiler system and areas that pose potential threats before they become major problems. Professional inspection also ensures every aspect of your boiler is inspected, even the hard-to-reach or see components.

Max GPM Flow: 11gpm Max Head Feet: 8ft Material: Stainless Steel Connection Type: Union_Half, Union Check Valve: Yes Pump Speed: Single Speed AM6-SUCV1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of only 0.54 amps the AM6 offers high performance and high efficiency. The SUCV1 features union connections with 1/2″ bronze sweat fittings. All stainless steel models are fully lead free. Circulator comes with BICV™ built in check valve. Our AM6 circulator replaces Taco 006 models and other model circulators.

The NEW AMRe-FVL High Efficiency ECM circulator for heating with IRON GUARD™ is fully automatic, no buttons to push, steel circulator with stainless cartridge. Does not require iron filter in the system to protect the circulator. External iron filter cost as much as the pump. 6 1/2 ft. replaceable line cord included to save money an time on installation. High performance of 20 ft. x 18 GPM, 120/1/60, low 45 watt draw, universal 2 bolt flange with nut retainer, built-in check valve, replaceable cartridge, a green sustainable product.

Aqua-Flash® AMK-UK Instruction SheetSubmittal Data SheetBrochure Aqua-Flash® AMK-UK Universal Kit Bypass Valve, Hose and Tee For Hot Water Tanks and Indirect Heaters The new AMK-UK brass and stainless valve kit with bi-metal coil provides 90° F hot water to every faucet. It does not require power under the sink The AMK-UK has a unique advantage, it can handle larger pump pressures up to 21 ft. hd. and provide quiet operation. The kit includes valve, hose and tee and can be installed quickly onto the cold angle stop. A hot water circulator needs to be installed at the hot water tank. Additional Under-sink bypass valve kits- up to 5 per pump. To be used with AMH1K-3UV AquaMotion , 70600 Nevercold, and FT1 APCOM.

You also have the option to rent or buy a replacement boiler depending on your needs and budget. Both choices have pros and cons, so weighing your options will help you make the best decision for your facility.

Safety should be a top priority when working with any industrial equipment, including boilers. Since boilers involve chemicals, high temperatures, high pressure, combustion, moving parts and other safety hazards, you should use a boiler with high safety ratings. Choosing a boiler that’s been designed and built with safety standards in mind can help reduce risks while working with the boiler.

Timely maintenance can make a huge difference in your boiler’s performance. Create a boiler maintenance schedule and checklist to stay on track and ensure maintenance tasks are done consistently. Some tasks should be done before and after each shift — like checking water levels — while others can be done daily or weekly. Indicate which tasks should be completed and when, and keep a log that tracks completed maintenance so you know for sure when tasks were completed and what’s needed next.

Type of Hot Water Heater: Tank Type of Household Plumbing: Single_Pipe Material: Stainless Steel Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH3K-7 Instruction SheetSubmittal Data SheetBrochure AMH3K-7 is designed for standard plumbing systems with hot water pipe length up to 250ft of total pipe length for hot water tanks Fully automatic system installs under sink Requires electrical outlet at sink No cutting of pipe Built-in Mechanical Timer Uses Built-In Non-Adjustable Aquastat (On at 85F/ Off at 105F degrees) Meets Title 24 California New Installation Video Here- Please note the red tailpiece is installed on the left side for Hot.

Low water levels in your boiler can happen for several reasons, some of which may be out of your control in some ways. Many of the common causes of low boiler water can be prevented with proper maintenance and adequate monitoring. Understanding these common causes can also help you understand how to fix and prevent low water issues:

Max GPM Flow: 31gpm Max Head Feet: 12ft Material: Stainless Steel Connection Type: 4_Bolt_Flange Pump Speed: Single Speed AM10-SF1 Instruction SheetSubmittal Data SheetCurvesBrochure AM10 Stainless 4 Bolt Flange

The Einstein circulator replaces the Taco oo7 oo7e 0015 0015e3 1816e 0018e, VR1816, VT2218 Grundfos 15-42, 15-58, Alpha I & II and others with one single model.

FK150S Submittal Data Sheet 1-1/2″ NPT, Includes Two Stainless Steel Flanges, Four Bolts, Four Nuts, Two Square Gaskets. Flanges have Octagon Action-Grip™ for quick non-slip installation with adjustable wrench Fits AquaMotion models AM5, AM7, AMR, AM10

Type of Hot Water Heater: Tank Type of Household Plumbing: Single_Pipe Max GPM Flow: 11gpm Max Head Feet: 8ft Material: Stainless Steel Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH1K-3UV Instruction SheetBrochure AQUA-FLASH® Recirculation Kit for hot water tanks with single pipe: AMH1K-3UV Kit includes: Stainless pump with 3/4″ FNPT union, built-in timer, 10 ft. line cord, bronze by-pass valve (with check valve), 2 ft. NSF hose & Tee Delivers Instant Hot Water Comfort in a Flash to Every Tap on the same line. No electrical connection required under sink. Ideal for pedestal sink installations Built-in Mechanical Timer New Video Here!

The primary purpose of water in a boiler is to protect metal components from the high temperatures produced in the unit. While metal surfaces like steel can withstand high temperatures, boiler temperatures highly exceed steel’s limits. When water levels get too low, the metal components are exposed to extreme heat, which can cause them to melt and warp. In addition to melting metal components, boiler low water conditions can also crack or loosen tubing, leading to water leaks.

AMH3K-7N is designed for standard plumbing systems with hot water pipe length up to 250ft of total pipe length for hot water tanks

Max GPM Flow: 20gpm Max Head Feet: 20ft Material: Cast Iron Connection Type: Flange, 4_Bolt_Flange Check Valve: Yes Pump Speed: Variable Speed Corded: Yes AM55-FVL Instruction SheetSubmittal Data SheetBrochure AM55-FVL Cast Iron Circulator has an Amp draw of only 0.07 to 0.57 amps, and watt consumption of just 5-38 watts the Einstein is the most energy efficient ECM on the market. This pump features 3 fixed speeds, 4 variable speeds and a night set back to maximize energy savings. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation. * Use an iron filter when installing circulator in existing systems to avoid problems with iron oxides. Circulator comes with BICV™ built in check valve. The Einstein circulator replaces the Taco oo7 oo7e 0015 0015e3 1816e 0018e, VR1816, VT2218 Grundfos 15-42, 15-58, Alpha I & II and others with one single model.

The AMK-UK has a unique advantage, it can handle larger pump pressures up to 21 ft. hd. and provide quiet operation. The kit includes valve, hose and tee and can be installed quickly onto the cold angle stop. A hot water circulator needs to be installed at the hot water tank.

AM7-SU1LXZT1 Stainless Union Circulator with 3/4″ Male Tailpieces, with outdoor enclosure, water, sprinkler, bug, freeze protected, anti-tampering locking device tab, built-in timer, 10 ft. line cord, pump bypass connection, check, flow control, hose, bypass Tee 3/4″ FNPT x 3/4″ MNPT x 3/8″ OD Compression. AMK-ODR bypass valve kit: Bypass valve, hose, Tee. Valve maintains 95° F. Installs under sink on the cold angle stop and no power required under sink. Patented.

A pump at the tank or tankless heater, or installed under the sink, forces the lukewarm water from the hot supply line into the cold supply line. If a dedicated return line is used it returns the lukewarm water to the heater.

Details. Condition. Used - Good. as per picture located in Douglas Hill sub Cobble Hill. Cowichan Valley, BC. Location is approximate.

Material: Stainless Steel Connection Type: NPT Pump Speed: Single Speed AM7-ST1 Instruction SheetSubmittal Data SheetCurvesBrochure AM7 Stainless with 3/4″ NPT 11×14 GPM

Look for important low-water features that will help you monitor water levels. Boilers with built-in LWCOs help reduce the risks of low boiler water immediately upon installation, saving you time and resources to install them later. Many boilers also feature blowdown systems, allowing you to conveniently perform this necessary maintenance routine.

AMH2K-7N is designed for dedicated return line systems with standard water heater. Good for up to 250 feet of pipe length.

The repairs you’d need after low water damage can be costly, sometimes requiring a new boiler altogether. LWCOs are a simple preventive measure that can save you money in the long run.

Keep in mind that your boiler water can be contaminated with other particles like oil. High concentrations of contaminants can lead to water carrying over into the steam lines. Maintaining consistent water treatments helps prevent boiler issues related to water impurities and contaminants.

AQUA-SHIELD™ Circulator for Outdoor installation. Installs on TANKLESS HEATER WITHOUT BUILT-IN PUMP FOR SINGLE PIPE INSTALLATION, USE WITH ON DEMAND- For up to 600 Ft. of total pipe length and tankless for all minimum flow rates. Stainless high speed circulator, flanged, 10 ft. line cord, with outdoor enclosure, for water, sprinkler, bug and anti-tampering locking device tab. Timer set to “On” only. AMK-ODR bypass valve kit (maintains 95F degrees) installs under fixture, Includes AMK-WB ON DEMAND-FK75S 3/4″ Stainless Flanges Included. Patent pending. – . Meets CA Title 24 with On Demand. Freeze protection does not work with this model because of the On Demand Kit.

Type of Hot Water Heater: Tankless Outdoor Type of Household Plumbing: Dedicated_Return Max GPM Flow: 16gpm Max Head Feet: 20ft Material: Stainless Steel Connection Type: 4_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH2K-RX Instruction SheetSubmittal Data SheetBrochure AQUA-SHIELD™ AMH2K-RX- Dedicated Return Line Outdoor Recirculation Pump AMH2K-RX for Outdoor tankless Includes: AMR-SFV1AXLT1 (flanged body) and FK75S 3/4″ Stainless Flanges For Outdoor Installed Tankless Heater without built-in Pump on Dedicated Return Line Primary Market Southern Tier of the US Outdoor installation saves on expensive air intake, exhausts Easy to service outdoor installed pump Pump freeze protected and water and sprinkler safe Greater choice of tankless models Automatic, built-in thermostat/switch designed for hot climate (115-125 F degrees), timer and 10 ft. line cord Clear cover with Timer visibility Meets Title 24 California (only with Aquastat) Aqua-Shield™ Pat. Pending

AQUA-ON DEMAND™ for TANKLESS HEATER (N) NO TIMER- USE WITH ON DEMAND CONTROL– For up to 100 Ft. of total pipe length and tankless minimum Flow Rate of .4 GPM or less AM7-SUEV1L Stainless Union circulator, Built-In check valve, 1” union with ¾” extended tailpieces with flat for mounting,with 10 ft. line cord, includes the AMK-ODR valve kit with Bypass valve on/off 95°-104°F, hose, Tee. The ODR valve installs on the cold angle stop. AMK-WB On Demand Remote RF Wireless Control with Adjustable Receiver and Cord. -No Wiring Required, up to 5 AMK-WB or AMK-MS or AMK-WS or mixed per Receiver

Type of Hot Water Heater: Tankless Indoor Type of Household Plumbing: Single_Pipe Material: Stainless Steel Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMH1K-6ODRZT1 Instruction SheetSubmittal Data SheetBrochure For TANKLESS HEATER WITHOUT BUILT-IN PUMP for Single Pipe Systems AM6 AquaMotion Stainless Steel Circulator with a built-in timer and a 10 Ft line cord. AMK-ODR bypass valve kit (ODR Valve, 2 Ft. Stainless Steel Hose & Tee), Bypass Tee 3/4” MNPT x 3/4” MNPT x 3/8” OD Compression Two 3/4″ NPT Male Tail Pieces with 1” Union Nuts and Gaskets, 2 Ft. Stainless Hose.The AquaMotion ODR Valve is a small, quiet, lead free stainless/brass hot water recirculation valve for single pipe systems. It installs at the fixture furthest from the tankless hot water heater. It acts in conjunction with the circulator to supply hot water using the Built-in Timer. The ODR Valve mounts below the fixture between hot and cold supply lines. When hot water is called with the Built-in Timer, the circulator forces the cooled hot water in the hot water line into the cold supply line which returns it to the hot water heater. As hotter water reaches the ODR Valve it closes until a 95°F temperature is reached at which point the valve automatically adjusts to maintain this temperature. New video here!

Check Valve: Yes Aqua-Max™ APB30 Pressure Booster Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Max™ APB30 boosts domestic water pressure in residential homes by 30 psi to all fixtures and sprinkler heads. Use it where the city/ town/ well water delivers insufficient pressure. Automatically Starts when water is drawn & stops when demand ends, No Short Cycling increases pressure after water demands ends, Simple Installation plumbs into incoming water line & plugs into 115V wall fixture, Compact Design easy installation 14″ x 14″ x 11″, Quiet Operation totally enclosed fan cooled motor, Stainless Steel Pump Construction for corrosion resistance & reliability, Composite Control with reinforced brass connections, Built in check valve eliminates back flow of cold to main, Mounting Base can be attached to floor or wall, Wash down Enclosures control and motor are sealed to prevent water entry, Drain and Fill Plugs for quick filling and venting. 1/2 hp and 3.3 Amps

Replacement cartridge for the AM7 circulator and the Taco 007 circulators. The CT07 replaces the Taco part RP007-042RP and 007-042 at 20-40% lower cost

Hotwater Recirculating pumpwith temperature sensor

SO100T Submittal Data Sheet 1″ NPT Isolation (shut-off) Flanges: Full Port Ball Valve with 360° Swivel Includes Two Flanges, Four Bolts, Four Nuts, and Two Gaskets. Forged brass body full port for water application 600 PSI Non-Shock WOG Allows draining of the non-pressure side of the valve when closed

Max GPM Flow: 18gpm Max Head Feet: 9ft Material: Cast Iron Connection Type: Flange, 2_Bolt_Flange Pump Speed: Single Speed AM5-F1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of just 0.54 amps the AM5 offers high performance and high efficiency. Our AM5 circulator replaces Taco 005, Grundfos, Xylem and Armstrong Pumps per Cross Reference Chart.

Blowdown is a process that involves emptying your boiler’s water tank and refilling it. This process helps you determine a few things, including:

Max GPM Flow: 11gpm Max Head Feet: 8ft Material: Stainless Steel Connection Type: NPT Pump Speed: Single Speed AM6-ST1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of only 0.54 amps the AM6 offers high performance and high efficiency. The ST1 features internally threaded NPT connections, but other models are available with sweat fittings. All stainless steel models are fully lead free. Our AM6 circulator replaces Taco 006 models and other model circulators.

Max GPM Flow: 17gpm Max Head Feet: 21ft Material: Cast Iron Connection Type: Flange, 4_Bolt_Flange Pump Speed: Three Speed AMR-3F1 Instruction SheetSubmittal Data SheetCurvesBrochure With Amp draws ranging from 0.46 amps to 0.79 amps the AMR offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation. The AMR circulator replaces Grundfos model UPS15-58, Taco 00R, Taco 0015, and Wilo STAR S21 and other model circulators.

Connection Type: Union_Half, Union UK50 Sweat Union Kit for Stainless Union Pumps Instruction SheetSubmittal Data SheetCurvesBrochure Two Unions with two 1/2″ Sweat Tail Pieces, Gaskets

Type of Hot Water Heater: Tankless Indoor Type of Household Plumbing: Single_Pipe Material: Stainless Steel Check Valve: Yes Pump Speed: Three Speed Corded: Yes AMH3K-RN Instruction SheetSubmittal Data SheetBrochure AMH3K-RN is designed for standard plumbing systems with hot water pipe length up to 600ft of total pipe length. Fully automatic system installs under sink Rubber mount Requires electrical outlet at sink Uses Built-In non-adjustable Aquastat (On at 85F/ Off at 105F degrees) Add On Demand Kit (5 Minute Run Time) To Turn On Meets Title 24 California

AMR-SF3, TwinTurbo Stainless Steel, HeadFt:41 GPM:17 AMR-SFV3, TwinTurbo Stainless Steel with check valve, HeadFt:41 GPM:16

Max GPM Flow: 7gpm Max Head Feet: 4ft Material: Stainless Steel Connection Type: NPT Pump Speed: Single Speed AM3-ST1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of only 0.46 amps the AM3 offers high performance and high efficiency. The ST1 features internally threaded NPT connections, but other models are available with sweat fittings. All stainless steel models are fully lead free. Our AM3 circulator replaces Taco 003 models and other model circulators.

Max GPM Flow: 16gpm Max Head Feet: 20ft Material: Cast Iron Connection Type: Flange, 4_Bolt_Flange Check Valve: Yes Pump Speed: Three Speed AMR-3FV1 Instruction SheetSubmittal Data SheetCurvesBrochure With Amp draws ranging from 0.46 amps to 0.79 amps the AMR offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design reduces inventory and cost while simplifying installation. Circulator comes with BICV™ built in check valve. The AMR circulator replaces Grundfos model UPS15-58, Taco 00R, Taco 0015, and Wilo STAR S21 and other model circulators.

Buy the latest watts n35b water pressure regulator VEVOR US offers the best watts n35b water pressure regulator products online shopping.

Low water is especially dangerous because it creates conditions where the boiler vessel can overheat and potentially explode. Adding cool water to overheated components will create steam, which expands significantly and creates too much pressure inside the boiler, causing the vessel to burst. A boiler explosion is a risk to lives, property and operations, and will cost you and your company significant time and money to recover from. Maintaining adequate water levels in your boiler is essential to safe operations.

Max GPM Flow: 18gpm Max Head Feet: 11ft Material: Stainless Steel Connection Type: Union_Half Check Valve: Yes Pump Speed: Single Speed Corded: Yes AM7-SUCV1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ AM7 Stainless with 1/2″ Union Sweat Fittings, BICV, line cord and timer.

Digital Timer with adjustable 7-day functions, as well as power failure protection that keeps its settings even after power outage or when unplugged

Max GPM Flow: 16gpm Max Head Feet: 21ft Material: Stainless Steel Connection Type: 4_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed Corded: Yes AMR-SFVL Submittal Data SheetBrochure Stainless AMR Set on High Speed with Check Valve and Line Cord

AMR-SF2, TwinTurbo Stainless Steel, HeadFt:36 GPM:14 AMR-SFV2, TwinTurbo Stainless Steel with check valve, HeadFt:36 GPM:13

Max GPM Flow: 31gpm Max Head Feet: 12ft Material: Cast Iron Connection Type: 4_Bolt_Flange Pump Speed: Single Speed AM10-F1 Instruction SheetSubmittal Data SheetCurvesBrochure AM10 Cast Iron 4 bolt Flange

Max GPM Flow: 17gpm Max Head Feet: 11ft Material: Cast Iron Connection Type: Flange, 2_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed AM7-FV1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of just 0.60 amps the AM7 offers high performance and high efficiency. The AM7 operates at 18% higher efficiency than leading competitors circulators. The AM7-FV1 uses standard 2-bolt circulator flanges for easy installation. Circulator comes with BICV™ built in check valve. Our AM7 circulator replaces Taco 007 and other model circulators.

A sensor/switch (Aquastat) built into the pump or an Aqua-Flash® or ODR Superflow™ By-pass valve transfers the lukewarm water into the cold pipe. The valves maintain average 93° F (34° C) at the sink. The under sink pump starts when temperature drops to 85° F (30° C) and stops when it reaches 104° F (40° C). The pump runs about 3 times an hour for 2 minutes. A built-in 24-hour mechanical timer allows the user to set the time when he wants instant hot water. An ON DEMAND button/motion sensor or app can also activate the system

Some boilers have indicator lights that can visually tell you when your boiler’s water level is too low. If your boiler has a low water light, check it regularly. Make this part of your daily or pre-shift checklists to ensure your team monitors it. If you notice the light come on, you know water needs to be added to the boiler immediately.

Whether you need a cost-effective boiler option or a temporary fix in an emergency, boilers from Smith Hughes are your most reliable option. Our comprehensive packages can include everything from installations and start-ups to boiler training and more. Our team will work closely with you to find a solution for your time and space needs. We also offer numerous boiler service packages, including 24-hour emergency boiler room services.

Max GPM Flow: 11gpm Max Head Feet: 18ft Material: Cast Iron Connection Type: 4_Bolt_Flange Check Valve: Yes Pump Speed: Single Speed AM8-FV1 Instruction SheetSubmittal Data SheetCurvesBrochure AM8 Cast Iron 4 bolt Flange with built-in check valve

CT07 Instruction Sheet Replacement cartridge for the AM7 circulator and the Taco 007 circulators. The CT07 replaces the Taco part RP007-042RP and 007-042 at 20-40% lower cost

Hot Water Comfort at Every FaucetSave Time, No More Waiting For Hot WaterSave Hot Water, 12,000 – 15,000 Gallons a YearSave Energy with Timer, Save on Utility and Sewer BillsSave More with “ON DEMAND” SystemsGo Green, Help Conserve this Precious Water ResourceMeet local Plumbing Codes

Boiler water must be treated to remove minerals that can cause buildup, encourage overheating or cause other damage. For example, oxygen in the water can cause corrosion like pitting and rusting on your boiler’s metal components. As the metal corrodes, it will become weak, thin and more susceptible to breakage. Various chemicals and treatments can be added to the boiler water to remove oxygen and other elements or particles so the water has fewer impurities.

Water levels within your boiler will fluctuate as it evaporates and is refilled. When it gets low, water needs to be added to the boiler through feed pumps or similar operations, depending on the boiler. As the controls sense low water levels, the pumps will kick in and feed water into the boiler until it reaches normal levels. When these systems fail to replenish low water, you’ll be at high risk of boiler damage. Fixing and maintaining low water levels is relatively simple with the right features.

Max GPM Flow: 18gpm Max Head Feet: 11ft Material: Stainless Steel Connection Type: Union_Three_Quarter: Union 3/4" Sweat Check Valve: Yes Pump Speed: Single Speed Corded: Yes AM7-SUEV1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ AM7 Stainless with 3/4″ Union Sweat Fittings, BICV, line cord and timer.

AMK-CB Instruction Sheet On-Demand Air Actuated Counter Control Kit – Wireless Button and Receiver (Button available separately AMK-CBW) For use with the AMH3K-7, AMH3K-7N, AMH3K-R & AMH3K-RN Under sink recirculation kits.

Max GPM Flow: 11gpm Max Head Feet: 8ft Material: Stainless Steel Connection Type: Union_Half Pump Speed: Single Speed Corded: Yes AM6-SUCV1LT1 Instruction SheetSubmittal Data SheetCurvesBrochure Aqua-Ready™ Stainless AM6 with 1/2″ Union Sweat Fittings, BICV, Line Cord and Timer.

Max GPM Flow: 7gpm Max Head Feet: 4ft Material: Stainless Steel Connection Type: Union_Three_Quarter: Union 3/4" Sweat Check Valve: Yes Pump Speed: Single Speed AM3-SUEV1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of only 0.46 amps the AM3 offers high performance and high efficiency. The SUEV1 features union connections with 3/4″ bronze sweat fittings. All stainless steel models are fully lead free. Circulator comes with BICV™ built in check valve. Our AM3 circulator replaces Taco 003 models and other model circulators.

Max GPM Flow: 20gpm Max Head Feet: 11ft Material: Cast Iron Connection Type: Flange, 2_Bolt_Flange Pump Speed: Single Speed AM7-F1 Instruction SheetSubmittal Data SheetCurvesBrochure With an Amp draw of just 0.60 amps the AM7 offers high performance and high efficiency. The AM7 operates at 18% higher efficiency than leading competitors circulators. The AM7-F1 uses standard 2-bolt circulator flanges for easy installation. Our AM7 circulator replaces Taco 007 and other model circulators.

AMK-MS Instruction Sheet On-Demand Wireless Control Kit – Motion Sensor and Receiver (Motion Sensor available separately AMK-MSR)

With an Amp draw of just 0.54 amps the AM5 offers high performance and high efficiency. The AM5-SF1 uses standard 2-bolt circulator flanges for easy installation.