Adjustable milk pressure reducing valve with ... - faucet pressure reducer
W1260XL-A - 15mm Zurn water hammer arrester 159xØ22mmW1260XL-B - 20mm Zurn water hammer arrester 184xØ22mmW1260XL-C - 25mm Zurn water hammer arrester 159xØ28.6mmW1260XL-D - 25mm Zurn water hammer arrester 184xØ44mmW1260XL-E - 25mm Zurn water hammer arrester 159xØ64mmW1260XL-F - 25mm Zurn water hammer arrester 184xØ73mm
watts 530c-std 1/2
20 Carr Road, Three Kings Auckland, New Zealand PO Box 27-555, Mt Roskill Auckland 1440 Ph: +64 9 624 1115sales@macdonaldindustries.co.nz
Maximum transient pressure surge, with arrester properly sized and placed in the water supply system, will not rise above 150 psi (1,050kPa) following quick valve closure. Maximum static pressure: 250 psi (1,720kPa). For best performance, static line pressure should not exceed 80 psi (550kPa); contact the factory for proper sizing if static pressure is greater. Max spike pressure 400 psi (2,750kPa). Nitrogen preload 60 PSI (415kPa).
Watts530C
This program instructs Nuclear Medicine Technologists in practical theory and operation of the Discovery NM 530c. Instruction is delivered by a GE Nuclear Medicine Applications Specialist at the customer facility. The training produces the best results when 1 to 4 Nuclear Medicine Technologists are dedicated to the complete training session. It is also critical that key Physicians are available to direct patient scanning and review images. In addition, the patient schedule should be modified as indicated in the agenda to allow time for instruction.
By the end of the program, Technologists who attend the complete training agenda will be able to use the system features and perform basic to intermediate procedures as described in the skill inventory included in the TiP training package.
The Zurn water hammer arrester is ideal for use where Lead-Free* fittings are required. Designed to protect residential, commercial and industrial water lines during pressure surges following quick valve closure. This excessive pressure surge is absorbed by the pre-charged cushion of air permanently sealed within the water hammer arrester. The water hammer arrester may be installed within a stud bay without the need for an access panel.