Industrialcommercial grease trap installation diagram

Each emergency plumber will work with grease traps across Sydney, including Eastern Suburbs and Sutherland Shire. We are also experts with handling Blocked Drain problems, from the grease trap to general plumbing units.

It is vital that the grease and waste caught inside of the trap are not thrown into the wastewater system, sewage system or into the grease trap plumbing. Store the waste and have it recycled at a proper disposal place. It is also essential that the waste collected from the trap is not drained into the environment as this can be extremely harmful.

Colin's Note- Water conditioners don't remove the minerals from the water, however they do neutralise the aggressiveness of them. For example, we sent a unit to a property about 600 kilometers from Perth. The owner told us before the unit was installed they had to virtually scrape the mineral build up of the shower screen once a week. Now, a small build up is still there just they only have to merely wipe the shower screen clean once a month.

Usedcommercial grease trap installation diagram

A grease trap is designed to prevent fats, oils and grease (FOG) entering wastewater systems and cause pipe blockages. They are installed mainly in commercial and industrial buildings where cooking is frequently performed. To ensure the sewer systems and other drainage systems are not clogged grease removal is essential. Optimised Plumbing Services offers reliable Emergency Plumber services where we promise to correctly work with grease traps.

A grease interceptor will need to be installed as close to the kitchen as it can but also be easy to access for maintenance. The two main types of grease traps are:

A part of proper commercial plumbing maintenance is to have the grease trap regularly cleaned and inspected. The inspection should occur once a month with a guide to grease trap maintenance follows:

A grease trap blocks solids, fats, oils and grease from entering the sewage system. This is to prevent large scaled blockages, backflow, and disruptions with plumbing lines. The trap works by collecting food at the bottom and grease, fats and oils at the top. A grease interceptor can be located near a sink or be located underground outside a building.

Commercial grease trap installation diagramaustralia

A grease trap, sometimes called grease interceptor or grease arrestors, are used to catch fats, oils, grease and solid waste. They catch these items to prevent them from entering the sewage system. The waste caught will also need to regularly be cleaned out and given to a wastewater treatment plant or disposed of sustainably.

Here at Optimised Plumbing Services, we will reliably work with grease trap systems all over Sydney. Our certified plumbers will make sure that all the pipework and fittings of the trap are correctly installed. When we need to repair or replace the grease trap system we will always work safely at all times. We also will professionally clean and perform maintenance tasks with the grease trap and ensure it is working properly.

This Diamond Model has been designed for Australian RV'ers / Travellers. It is used to assist in eliminating calcium buildup around shower heads, sink spouts, kettles and hot water systems. It will also effectively remove any build up that has occured before installation of the conditioner.