The roots of the BWT group can be traced back to 1823, when Johann Adam Benckiser founded the small chem­ical factory in Germany bearing his name. In 1990 Andreas Weißenbacher laid the foun­da­tions for BWT as we know it today as part of a manage­ment buy-​out, and from “Benckiser Water Tech­nology” he created the “BWT”, the bedrock under­pin­ning our long-​term success story. BWT’s head office was initially based in Hallein, and two years later the still young company relo­cated to Mondsee.

Watertreatment solutions

2024722 — Manufacturer of thermostatic valves and thermal actuators used for temperature & fluid control, thermal bypass, thermal relief, mixing, ...

Our name defines our vision: we understand that our responsibility is to develop the best quality products and services for water treatment. We also make water our mission, ensuring hygiene safety and health in our daily contact with water.

All BWT companies orient themselves to these standards, and some of our companies have already gained numerous ISO certifications, which reassures our customers and business partners that we act and work to the highest standards at all times.

The termination point of the discharge line should be observable to the occupants of the building so any discharge can be readily detected.

Save to List Request Quote. Not in Stock. LF009M2QT-075 WATTS L/F R/P. LF009M3-QT WATTS 3/4IN RED PRES LF. SKU#: 14104020. $1,080.46. $964.85. Login to see your ...

Water technologycompanies

To view this video please enable JavaScript, and consider upgrading to a web browser that supports HTML5 video

When water is heated it expands. In a 40-gallon water heater, water being heated to the thermostat setting expands by approximately 1/2 gallon. The extra volume created by this expansion usually pushes back into the water tower of public water supplies, or into the well tank in homes with a private well, resulting in negligible pressure increase. However, on public or shared water supplies were a backflow device is installed on the water main feeding the house, the pressure can no longer push back into the tower or  well tank. With no place for the expansion to go, pressure will dramatically increase.

As we continue to grow, we consider it our duty to assume ecological, economic and social responsibility for all our activities.

To develop further, however, we must not only think of the future, but also of the here and now. This is why we strive to improve and optimise existing processes and procedures, and develop existing technologies and products in a spirit of constant improvement.

Discharge from a T&P valve may indicate an unsafe temperature or pressure condition exists, which requires immediate attention by a qualified service technician or licensed plumbing contractor.

Interceptor: Directed by Matthew Reilly. With Elsa Pataky, Luke Bracey, Aaron Glenane, Mayen Mehta. One Army captain is forced use her years of tactical ...

A good indication of a thermal expansion problem are small, recurring discharges from the T&P valve (a thermal expansion issue can be confirmed using a Watts IWTG gauge). These recurring discharges can compromise the function of the T&P safety valve so it’s critically important that any thermal expansion problem is addressed! The preferred way to address a thermal expansion problem is with the use of an expansion tank designed for potable water applications, such as the Watts PLT series.

Water Technologyjob

A pressure differential relief valve located in a zone between two positive seating check valves prevents back siphonage and back pressure of hazardous ...

tekmar Control Systems Ltd. · 5100 Silver Star Road, Vernon, British Columbia, V1B 3K4, Canada · +1 (250) 545-7749.

Watertech solutions

In practical terms, we implement our vision by submitting our products and services to tests and certification processes by independent institutions to achieve the best possible standards of product quality and customer satisfaction. These include ISO 9001 accreditation and compliance with HACCP (Hazard Analysis Critical Control Points). We have introduced environmental and energy management in compliance with ISO 14001 and ISO 50001 to embed the concept of sustainability in all our activities. We also send a clear signal in the area of occupational health and safety: with certification according to OHSAS 18001 – for the safety and health of our employees.

Watertreatment company in USA

In normal operation of the water heater and T&P valve, no water should be discharged from the valve.      A relief valve functions by discharging water, it is essential that a discharge line be piped from the valve outlet to carry the overflow to a safe place of disposal. The discharge line must be the same size as the valve outlet, and must pitch downward from the valve with no traps and no more than 4 fittings. The termination point of the discharge line should be observable to the occupants of the building so any discharge can be readily detected. Discharge from a T&P valve may indicate an unsafe temperature or pressure condition exists, which requires immediate attention by a qualified service technician or licensed plumbing contractor.

Boiler Drain Valve, 1/2 x 3/4 in Connection, FIP x Hose, 125 psi Pressure, Bronz ; Quantity. More than 10 available ; Item Number. 255980449556 ; Brand. Arrowhead.

Waterengineering consultants

This describes the central role the element water plays in our “blue planet” and also the remit of BWT: we use our expertise to make the limited water resources of our planet accessible and usable – and always in harmony with nature.

Only those who think and act innovatively will gain a technological advantage, and BWT’s innovation centres are committed to continuous research into all aspects of water treatment: filtration methods, filter media, ion exchange systems for demineralisation, softening, decarbonisation, membrane technologies (micro-, ultra- and nanofiltration, reverse osmosis), pure steam generators, pure water distilleries, UV systems, ozone generators, ion exchange membranes, electrolysis, electrodialysis, electrodeionization, chlorine dioxide generators and dosage pumps.

BWT’s vision has evolved out of all these challenges and demands. We want to become the world’s market-leading water technology group, and to achieve this we must grow all the areas of our business.

T&P valves used on residential water heaters are typically designed and manufactured to relieve pressure at 150 psi and temperature at 210 degrees F. ASME, ANSI and CSA (AGA) approved relief valves protect the water heater from excess pressures and temperatures by discharging water.

An entrepreneurial spirit and a hunger for innovation and success are factors that have shaped and characterised BWT as a company, from its humble beginnings in Pforzheim to today’s large-scale enterprise.

Listen to Dead Level, a playlist curated by Dead Level ... Dead Level. Dead Level. Album. 9:52. 2 Tracks. Nov 13, 2019. #Heavy metal · Red Light. Dead Level.

We've created your quick 101 course on hose bibs right here. We've compiled all the most important information and tips that you need to be aware of.

Our strapline “For You and Planet Blue.” summarises our mission in a nutshell, which is to implement sustainable and responsible corporate strategies to satisfy both the needs of the individual and to preserve the Earth as a unique habitat.

Every day we research innovative solutions and strive to continue developing our company and our products. Our objective is to offer our customers water treatment facilities, technology and support services, while safeguarding the resources of our blue planet.

... RPZ W/OSY VLV, FEB880VOSY30. Manufacturer Info. Febco. See All Febco ... Febco 905188 Febco ...

Powers LFLM497-1 Hydro guard thermostatic mixing valve for tempered domestic potable water and lavatory applications. This valve provides 9.8 GPM at 30 psi.

One of the drivers of growth is innovation. Only those who actively and continuously develop their products and services, and think out of the box, can grow bigger and better. We also understand the importance of geography; there are currently over 80 BWT subsidiaries and affiliates worldwide and R & D departments in France, Germany, Switzerland, Austria and Russia. We’re working on gaining more!

The last line of defense for pressurized equipment, Temperature and pressure (T&P) relief valves are critical safety devices that protect equipment from excess pressure and, ultimately, catastrophic failure.

BWT’s aims and products are designed to serve humans and their needs; “You” are our customers, our business partners and our employees.

Our sole objective over many years has been to improve the quality of life wherever water is present, and to use customised water treatment processes to achieve the best possible water quality. However, we do not limit our range to standard products, but constantly set new standards in water technology. In the spirit of our “Feel, taste, see the difference” philosophy, we supply products to our customers that are genuinely innovative, which include pleasant-tasting and vitality-boosting drinking water, silky-soft Pearl Water as a beauty therapy, or water in its purest form as an essential component in high-tech applications. Feel, taste and see the difference!