WattsBig Bubbaspec Sheet

Depending on which model you are working with, this could be directly on the manifold, or after a flex-hose - as seen with this unit.

Regardless of the reasoning, we're here to help you successfully and, most importantly, safely, install a hose extension to your barbecue.

Licensed Gas Lines Whether your project is inside (fireplace?) or outside (backyard kitchen?), this is a space full of tips and advice

WattsBig Bubba filtercartridges

Licensed Gas Lines Whether your project is inside (fireplace?) or outside (backyard kitchen?), this is a space full of tips and advice

WattsBig BubbaS101

Please Note: We do not recommend having a hose above 20 feet in length as it might cause a decrease in pressure. Causing your unit to under fire (and nobody wants that!)

Why, do you ask? This is because the hose on your barbecue is what needs to plug into your gas line, so the extension is placed between the unit and the original hose.  This is done using appropriately sized wrenches, or adjustable wrenches.

Watch carefully in all the places you have applied the soap to see if any bubbles arise. If there is no bubble movement, then you have successfully extended your barbecue line!

Filterhousings

Maybe you're looking to shift your barbecue across your deck, or just want to add a few extra feet so you can move it closer come winter time? (We wouldn't blame you.)

Place the female end of the original hose onto the flared brass connector fitting.  Once again, tighten fully to ensure there are no leaks.

Once the fitting is tight, reapply the leak detector and perform another leak test to check and see if the leak has been solved.

Side Note: Do NOT use Plumbers tape / Teflon tape in place of pipe sealant.  This tape degrades over time which can lead to gas vapors escaping from the fitting (Safety First!)

Be sure the hose is securely wench tightened!  We will perform a soap test later on to ensure there are no potential leaks.

However, if there are bubbles, we recommend turning off the gas immediately, loosening whatever connection that may be leaking and then re-attaching it to see if there was any cross threading or improper installation.

Big Bubba FilterHousing

Congratulations, you have successfully extended your barbecue hose! Now you (or your partner) can get back to grilling your favourite foods with your barbecue properly placed where you want it. How long til' the meatloaf?

This is done by applying pipe sealant to the male end of the hose and attaching a flared brass connector fitting. The size of this fitting will depend on if your hose is 3/8" or 1/2" in diameter.

With the extension hose now properly installed onto the barbecue, we can look to finish the process by attaching the original hose onto the extension!