The pipe in the slab is encased in concrete which acts as extremely effective protection from puncture. A 2013 study has also shown that PVC pipe is expected to last in excess of 100 years.

In-slab heating is designed to keep your home comfortable right throughout the cold months of the year. It is a set-and-forget system, in that it is turned on at the start of the cold season and off at the end.

Hydronic Slab heating turns your whole floor into a radiant heater producing that amazingly comfortable warm home that hydronic floor heating is known for. Hydronic slab heating is an ideal heating solution for large open living areas such as kitchens, living and dining areas as well as bathrooms that have a concrete slab beneath them.

Preventive maintenance is the best way to care for a water heater. These are the best two ways to check and maintain your temperature and pressure relief valve.

It doesn’t matter where the expansion tank is installed, as long as the water has somewhere to go when the thermal expansion occurs. Call Hackler Plumbing today if you think you require an expansion tank installation. We are your local McKinney plumbing company serving the surrounding Metroplex area and are here to fix all water heater-related problems and can perform tankless water complete installations.

If you have questions about whether your temperature and pressure relief valve is leaking or if other problems are causing it to release water, call Hackler Plumbing today. Our professionals will be able to give you the answers you need after a thorough investigation of your water heater temperature and pressure relief valve.

There is a lot more to a water heater than meets the eye. One of the most common issues inside a water heater tank is thermal expansion. The professionals at Hackler Plumbing can tell if thermal expansion is occurring in your system and what you can do to solve the problem.

When the water expands in any closed system, it will have nowhere to go. When the temperature builds up in the tank, so does the pressure. The temperature and pressure relief valve work to alleviate this excess build-up to keep our water heater from exploding.  In some cases, serious measures will need to be taken to handle the extra pressure caused by thermal expansion in a closed system.

These are wired to an actuator control box as well as the additional thermostats. This way if you select the desired temperature on a second thermostat, that thermostat communicates to the control box to turn on the boiler and open only it’s circuit(s) of in-slab heating.

T&p valve water heaterreplacement

There is no air being pushed around which means that dust isn’t moving around your home, and gives allergy sufferers a huge relief.

T&Plinewater heater

Let’s say we change the temperature and pressure valve and it continues to leak after replacement. Now we know there is a more serious problem with our water heater and we wasted all that time and money.

If you require more control and efficiency of your in-floor heating then an in screed hydronic heating system is the way to go.

The temperature and pressure relief valve (sometimes called a tpr valve or tp valve) helps regulate the pressure and temperature of the water inside the tank. Both can be extremely dangerous if too high.

The most suitable floor finishes for in-slab heating are polished concrete or tiles. This is because they are all great conductors of the heat energy created from the hot water in the hydronic heating system.

When in operation the floor heating thermostat will call for hot water from the boiler. A hydronic heating boiler will heat the water and pump it through the pipe at 50°C transferring its heat into the concrete slab, this heat then radiates through the home similar to how a brick wall radiates heat after the sun goes down on a summers day.

Another function of the temperature and pressure relief valve is to release water from the tank if it gets too hot. Thermostats and temperature controls can go out in time. When the water in our hot water tank gets to a dangerous level, we rely on the pressure relief valve to expel it from the tank and through the discharge tube before it can give us 3rd-degree burns.

The temperature and pressure relief valve is a safety feature we need to work on any water heater. Many components work together on a water heater so that our water is at the perfect temperature and comes out with just the right amount of pressure.

Water expands when it gets heated. Our water heater tank and plumbing lines are a “closed” system if a check valve or pressure regulator is on the water supply for the house.

Most slab heating systems only have 1 thermostatically controlled zone and can still be set up so that bedrooms don’t heat as much as living spaces. This is because a slab heating system is made up of circuits of pipe each covering around 20sqm connected to a manifold with balancing valves.

The main job of a temperature and pressure relief valve is to leak. Diagnosing the temperature and pressure valve can be problematic for any DIYer.

T&P valvedripping

For a home to consider multiple thermostat controlled zones with in-slab heating, each space must be thermally broken. We then install the pipework to suit and actuator heads to each circuit of pipe at the manifold.

It is where the pipes that carry the heated water are laid before the structural slab is poured. The pipes are laid 200mm apart in a snake-like pattern to and from the manifold in 100m lengths. Each circuit covers around 20 square metres of floor space.

The best way to prevent a faulty temperature and pressure relief valve is to maintain it regularly. The pressure relief valve must work right as it is the most crucial safety feature on the water heater.

Water heaterreliefvalvedripping

If you consider your slab is a battery that needs to charge up with heat energy, it initially takes most of a day to become 100% full and able to keep your home at a comfortable temperature. Then it is only topping up the heat energy in your slab as it only has to maintain the temperature and therefore uses far less energy which is how it is extremely efficient to run.

If you consider your slab is a battery that needs to be charge up with heat energy, it initially takes most of a day to become 100% full and able to keep your home at a comfortable temperature. Then it is only topping up the heat energy in your slab as it only has to maintain the temperature and therefore uses far less energy which is how it is extremely efficient to run.

T&p valve water heatertroubleshooting

It’s a good idea to call Hackler Plumbing the moment we notice the tp valve or discharge tube dripping to be sure the problem isn’t the valve itself.

When we install the pipework bedrooms are generally kept on separate circuits to the main living areas. This enables the balancing of a system when it is commission so that bedrooms don’t heat as much as living spaces.

T&P valvereplacement

They can determine whether or not you have a check valve or pressure regulator installed and help solve your temperature and pressure relief valve problem. They will even be able to install an expansion tank if they discover you do have a closed system.

We pride ourselves on providing a quote no matter what size, stage or status of the project. Whether you are close to construction, or just budgeting your next project we can offer you an accurate, no-obligation quote. Each quote is designed to give you the best price and a selection of optional upgrades to suit your preferences.

In slab heating is designed to keep your home comfortable right through out the cold months of the year. It is a set and forget system, in that it is turned on at the start of the cold season and off at the end.

The Temperature and pressure relief valve on all water heaters automatically opens when they sense an excessive amount of pressure or heat in the water heater tank, alleviating any damage they might have caused. Water will leak through the valve and discharge tube after all excess air escapes from the tank.

The pipe is run in continuous circuits back to the manifold that is outside of the slab which means there are no connections within the concrete. Once the pipe is laid our technician will pressurise it to 10 bar to check for any leaks and to make a puncture during concrete pouring highly visible so that if it should be punctured it will be replaced.

T&P valveprice

Our multi-layered specialist pex-b and are tied directly to the reinforcement mesh (reo) and then the slab is poured directly over the top encompassing the pipe.

T&p valve water heaterinstallation

If you require more control and efficiency of your in floor heating then an in screed hydronic heating system is the way to go.

We aim to get your quote back to you as quickly and accurately as possible. If your request is urgent it is best to call the office.

Adding an expansion tank to a closed system can completely stop a leaking T&P valve. If you’ve replaced your temperature and pressure relief valve, but it’s still leaking, one of our professionals at Hackler Plumbing will be happy to inspect your plumbing system.

Our Newsletters help you keep up to date with the latest hydronic products, services and featured projects once a month.

The temperature and pressure release valve protect us when any components on the water heater go out. It’s important to remember that a pressure valve is made to discharge water from the tank if there are any issues. Figuring out if it’s leaking or not can be confusing.

In rare cases, water heaters can shoot into the air like a missile without a properly functioning pressure relief valve.