Backflow Prevention and Cross-Connection Control Program - backflow devices
If you are experiencing low water pressure continuously, check that your internal stop tap is fully open. If you are able and it is safe to do so you can also try turning your external stop tap.
Our plumbers provide professional maintenance and plumbing services – 24 hours a day, 7 days a week everywhere in Brisbane. If you have an emergency plumbing situation, then contact us now and we will come to you ASAP.
Low water pressure can disrupt your routine and maybe bad enough to call in your local plumber. In this article, we will discuss the 7 possible reasons for low water pressure in your house and how to address the issue. Keep reading to learn more.
Your local water supplier may be conducting maintenance work that can temporarily reduce the water pressure in your area. Ask your neighbours if they are facing the same issue or contact your water supplier to find out if they are working on an issue. You may have to sit tight and wait for them to resolve the works before your pressure returns to normal.
Over time water pipes can become blocked with mineral deposits, rust, or other materials. One simple way to diagnose if the problem is caused by blocked pipes is – the water flows normally when you open the tap but then the flow drops significantly. Contact your blocked drain plumbers immediately to remedy this issue.
The water pipes in your home are often made of galvanised steel or copper, over time due to sediment deposits they can begin to corrode. Galvanised steel pipes will last for around 20 years whereas copper pipes generally last for up to 50 years.
There are two shut-off valves controlling your home’s water supply – one at the water meter and the other at your home. If the valves are only partially open, they may affect the supply. Inspect the valves and make sure they are both fully open. If the valve is broken, contact a qualified plumber to get the valve replaced.
Contact your trusted local plumber at Ryan Old for all your low water pressure issues throughout Brisbane at 1300 055 940. Alternatively, complete our online plumber booking form and we will get back to you.
In most cases, your stop tap will be installed at the boundary of your property. If you are on a water meter, you may have a stop tap that is installed inside the metering chamber. The stop tap will either be a plastic head that needs to be turned 90 degrees to its open position or if it’s a brass tap this needs to be unscrewed until it reaches a natural stop. At the same time, you can also check that you do not have a leak on your supply which may be causing the low pressure.
All Ryan Old plumbers are experienced, fully qualified plumbers who believe in offering exceptional service at a reasonable price. We can quickly attend to all of your home plumbing requirements from unblocking drains to major renovation jobs.
The pressure regulator is a valve controlling the water pressure so it is safe for your plumbing system. When the pressure regulator develops a fault, it may cause the water pressure to increase or decrease.
At Ryan Old Plumbing, we can detect leaks, fix dripping taps, repair toilets and more. Call us today for prompt and professional service.
If the low water pressure problem occurs with only one or two taps, they may be clogged with dirt or damaged by rust. After continuous use, the washer and o-rings will no longer function well, potentially blocking the water flow resulting in low pressure. You can try to fix your tap by replacing the washer yourself or contact your local plumber to test and replace the faulty tap fitting.
A leak in your pipes or tap can also reduce the flow of water. If you notice puddles of water outside your home (particularly between the metre and the building) or your kitchen/bathroom is experiencing unexplained mould growth, these are sure signs of a leaking tap or pipes. Turn off the water supply from the mains and contact your plumber for expert leak detection and repairs.
If you have an old house, the pipes may be severely rusted from the inside making the issue hard to identify. If the pipes are corroded you may not be able to see the blockage and you will have to contact your local plumbers who can replace the pipes in your home with durable materials.