Amesbackflow 2000SS

Ames Fire and waterworks was established in 1910 manufacturing valves, fittings for all type of pipeline systems.  Ames products are used in fire protection, water work markets and irrigation systems.  Specialises stainless steel backflow preventers and other products including fire protection and irrigation.

2000B- FP incorporates gear operated slow closing isolation valves.   The housing contains a bronze body construction designed with a backflow prevention testable with a medium hazard rating.  Maximum pressure 175psi.  Available in 25-50mm.

LF2000B Double check valve series this is a testable device with a medium hazard rating. This backflow prevention device is designed to prevent backflow in portable water supplies.  The device is easily maintainable with a Lead free cast silicon copper alloy body construction.  The maximum pressure is 175psi.  Sizes range from 15 to 50mm.

Ames3000SS 6 inch

M200 and M200N Stainless steel double check valves assemblies is constructed for fire systems with a high flow requirement to prevent backflow into the drinking water supply.  These are designed with a compact housing.  This testable device features stainless steel housing and sleeves as well as minimal pressure loss through the double check valve device.  The stainless steel construction is 70% lighter than standard designs.  Maximum pressure is 175psi.  Available in a range of sizes from 65 to 250mm.

We offer an extensive range of pressure regulator valves that are perfect for a number of heating and plumbing applications.

Ames3000SS spec Sheet

Commonly found on irrigation systems. A slight design change took place in the 1990s and the bonnet O-Ring thickness was changed. Repair kits ...

2000SS Double check valve assemblies is designed to prevent the backflow of potentially contaminated water entering the drinking supply.  This valve is ideal to be retro fitted into an existing fire service.  This backflow prevention device is testable with a medium hazard rating.  Maximum working pressure 175 psi.  Available sizes 65-300mm.

8"ames3000ss

M200Na device is ideal for fire services manufactured to ensure high flow through the stainless steel housing.  This device has a medium hazard rating and is a testable device.  The M200Na has a maximum working pressure of 175psi and range includes sizes of 65 to 100mm.

Ames3000SS Repair Kit

24 Aug 2010 — In general a high pressure or flow process will cause higher resistance and will need a higher min and max bench setting but since these are ...

202131 — Thermostatic mixing valves are useful in applications that must ensure a constant outlet temperature to prevent damage or injury.

GET BEST PRICE ON Tekmar 279 Steam Control - One Stage.

20151018 — It is possible you got a bad mixing valve, but They usually fail from mineral deposits and/or sediment. If you have hard water, expect similar ...

AmesBackflow 3000SS

Military Standard MIL-V-18146B Type I. Series 25AUB-Z3 and. LF25AUB-Z3. Water Pressure Reducing Valves. Sizes: 1⁄ ...

2000B device is constructed of a bronze housing that is easily maintained and serviceable.  Designed for medium hazard use.  The backflow prevention device is fitted with test points to ensure correct working with a medium hazard rating.  Maximum pressure 175psi.  Available size 15-50mm.

Ames3000 DCDA

Connect. I would like to receive communications from Reece and agree to the Terms of Access and Privacy Policy.

Double check valve 1000 series is a 1000DCV detector check valve used predominately in fire protection applications.  The valve is fitted with a detector to check unauthorised use of leakage in the water system.  There are two options:

4"ames3000ss

1000 SS series (stainless steel detector check valve) has been constructed using a stainless steel body with flanged connections with stainless steel linkage parts.  This series is lightweight, non corrosive and can be installed either vertically or horizontally.  The maximum working pressure is 175psi.  Noted this valve is also available in lead free models.

3000BM1/3000BM1-FP is a bronze body construction detector assembly double check valve.  This valve is primarily used in fire sprinkler systems. Designed with a low usage water meter to read the unauthorised use of fire systems.  Protects against possible back siphonage and back pressure.  This is a testable device with a medium hazard rating and a maximum pressure of 175psi. Available only in 50mm size.

1 Watts N45BU pressure reducing valve, Home Depot P/N 111388, 1 brass male ... I believe there is a distinction between the inline RV pressure regulating valves ...

ConTrols shower mixing valves and accessories are designed for commercial and industrial facilities, offering cost-competitive options for high-end PBVs.