Become an Anderson Maintenance Plan member for Only $18 per month for annual visits to check your plumbing & HVAC systems

RVWaterPressureRegulator

A blue tempering valve is the most common one. We utilize it in electric heaters to deliver temperatures between 65-75 degrees.

Luckily, for you, we have the answer to all your water pressure woes, and that is with a compact and inexpensive water pressure reducing valve, commonly known as a water pressure regulator.

The above requirements are achieved with the help of a hot water tempering valve. However, in the laundry and kitchen, this requirement can be bypassed and water can be fetched directly from the gas or electric unit.

Pressureregulator

Become an Anderson Maintenance Plan member for Only $18 per month for annual visits to check your plumbing & HVAC systems

According to the regulations for hot water system installation, it is now necessary to have tempering valves in the hot water unit to avoid scalding. Your plumber should make this installation or adjust a tempering valve in your system to avoid dispense of water that has a temperature higher than 50-degrees.

Unnecessary high pressure is not suitable for your pipes; the heavy flow can cause hairline cracks and leaks, eventually leading to a big pipe blow out. Water leaks will do extreme damage to your home, often requiring major construction restoration to damaged floors, cabinets, drywall, and surrounding areas – not to mention mold. To reduce your chance of having a major plumbing disaster — you’ll want to get your water pressure regulated fast.

When checking the hot water tempering valve, your plumber may first ensure that the tank temperature is 60-degree and then he may use the closest tap to check the dispensed water. But, in the closest tap, the flow of hot water should be minimum 4L/ min to correctly check the efficiency of the tempering valve. After this, the plumber may switch on the valve to set it to 50-degree temperature.

However, a tempering valve or a mixing valve still keeps the water hot enough in the tank to eliminate bacterial growth but provides water at a temperature that reduces the risk of scalding and accidental burning of a child or human.

Become an Anderson Maintenance Plan member for Only $18 per month for annual visits to check your plumbing & HVAC systems

PRV valve

When your plumber installs a tempering valve in your hot water system, he needs to necessarily set the minimum required tank temperature to 60-degree. However, he may set the tap water temperature or 45-50-degree depending on the needs of the household. These two adjustments by the licensed plumber help the tempering valve to function correctly.

Become an Anderson Maintenance Plan member for Only $18 per month for annual visits to check your plumbing & HVAC systems

A hot water tempering valve can be adjusted by 2-inlet mixing, through which water temperature is moderated by mixing cold water and hot water. Here, the tempering valve aims to achieve a temperature of 50-degrees. This decreased temperature is dispatched from the shower heads and taps. The temperature achieved by the tempering valve is set with the help of local building codes.

Of course, the installation might seem like an extra cost, but it’s one that will quickly pay off. Your water bill will significantly reduce and you can even see a decrease in your energy usage, with fewer repairs on your appliances, too. And here’s another tip: Once your water pressure is regulated, swap out your showerheads, faucets, and toilets for low-flow and water efficient models as these will save even more on water usage in your home. With today’s technology, they are designed to deliver great water pressure when you turn on the faucet, shower, or flush while using very little water.

Become an Anderson Maintenance Plan member for Only $18 per month for annual visits to check your plumbing & HVAC systems

The green valve is commonly used for gas systems, such as tankless continuous flow models. However, if your gas system is new, then it may already have a pre-set 50-degree as adjusted in the factory during manufacturing. So, you may not require a tempering valve for this.

A tempering valve for the hot water unit is a temperature-controlled and activated valve for 3-way mixing. It is used to manage the temperature of the water by mixing hot water and cold water. This delivers lower temperature water for enhanced safety and decreased risk of scalding.

Watervalve

A massive stream of water might seem like a great thing in your home — but not only is that high-pressure wasteful, it could be costing you money, too! Think about water pressure in your home the same way you think about your blood pressure. The higher the pressure, the higher the chances of problems down the line.

The black valves are used for low-pressure gravity feed or large capacity systems. However, the lifespan of these systems is not fixed. Hence, you may want to replace this valve in every 5 years.

Another reason why you need a water pressure regulator Goes back to the blood pressure analogy, imagine your appliances dealing with that high water pressure. It puts a strain on every part of the appliance that delivers water. The steady, regulated stream of water created by the water pressure valve, will prolong the life of your appliances and allow them to work at their best.

The orange valve is used for a heat pump or solar hot water system. This is used when the hot water can reach a boiling point.

Regulating valve

This rule is an exception for tankless systems or continuous hot water systems. Since a continuous hot water unit doesn’t have a tank, the growth of bacteria is eliminated, which eliminates the need for a 60-degree temperature inside the tank. This is why these units come with a pre-set of 50-degree temperature, so you don’t require a hot water tempering valve in these systems.

Become an Anderson Maintenance Plan member for Only $18 per month for annual visits to check your plumbing & HVAC systems

If the water pressure level coming into your home from the city exceeds 80 psi, you need a water pressure regulator. Reducing the system pressure 10 to 20 psi can save thousands of gallons a year in the typical home. With a regulated stream of water set at the right pressure levels, you will save on water consumption in your home without changing any habits! A water pressure valve is great for your savings and the environment.

Pressure Reducing Valve

Become an Anderson Maintenance Plan member for Only $18 per month for annual visits to check your plumbing & HVAC systems

A water tempering valve is an element that checks water sensitivity by mixing hot and cold water, depending on the requirements and adjusted temperature on the value. The mechanism through which the hot water mixing valve works contains a sliding valve inside a tempering valve, which adjusts and changes the ratio of the cold and hot water accordingly. Typically, this valve mechanism controls the dispensed water temperature between +- 3%.

Pressure regulating valve

As the task is crucial and legally necessary, you need a licensed plumber Sydney to achieve this. Don’t try this task at home yourself.

In reality, scalding causes serious injuries to children. These injuries are extremely painful and slow healing. Without a tempering valve, scalding can happen rather quickly, depending on the water temperature that you have set.

Need water pressure regulator repairs or replacement in San Diego? We’ve got you covered! Our plumbing experts can add a house water pressure regulator to your plumbing system.

Fact: No one wants to take a shower in a jet stream! With steady pressure from the water pressure regulator, you can have a more relaxing shower experience and will never have to worry about soaking yourself while washing the dishes. A water regulator valve can accomplish this by controlling the amount of pressure in your shower head.

Become an Anderson Maintenance Plan member for Only $18 per month for annual visits to check your plumbing & HVAC systems

At Anderson Plumbing, Heating & Air, our plumbing technicians are licensed, and all of our service and parts come with a warranty. Call 866-374-0402 to get your water pressure regulator to start saving money and water.

A hot water tempering valve is engineered in a manner to maintain a temperature which is suitable for the tank as well as for dispensing. This means that when the water is in the tank, it’s temperature is above 60-degree. This kills harmful bacteria and germs present inside the tank. However, when the tap is turned on, the water is mixed with cold water to maintain a temperature of 50-degree. This helps in avoiding accidents. This means that the tempering valve mixes water before it ever reaches you.

Waterpressureregulator

For every installation, remember to consult a licensed plumber. Don’t try this installation yourself to avoid damage of any kind.

There are various types of tempering valves. While the primary purpose is the same, the functioning is different. Let’s see a few types of tempering valves.

On the other hand, if a tempering unit is being used, then hot water burns won’t happen too quickly with a temperature of 50-degrees. This is why you can benefit a lot with a hot water tempering valve that can control the temperature of dispensed water.