Hydronic heating systems provide localized warming of concrete floors for thermal comfort while offering significant health, financial, and environmental benefits. Create a comfortable, healthy living environment by having the floor distribute bottom-up heating via a professionally installed radiant floor heating system.

Radiant floor heating offers several desirable benefits, even if you live in a moderate climate like Texas. In-floor heating solutions can provide warmth during the coldest months, lowering your electric bill and ultimately contributing to global sustainability efforts.

Building code requires homes that receive water with pressure greater than 80 PSI have a water pressure regulator. A home’s water pressure should stay in the range of 40 to 60 PSI. You can test your home water pressure easily with a pressure gauge with a garden hose adapter. If your home receives water from a city water system, your water pressure fluctuates throughout the day. Instances where there is sudden high demand for water, such as firefighting, cause water pressure to dip and rise in a water line. The use of a PRV can help steady these fluctuations.

If you have little to no water pressure in your home, your water pressure regulator may be the cause. If you have pressure with cold water and not with hot, then your water heater is most likely the cause, not the regulator. However, if both hot and cold yield the same low water pressure, you will need to replace your PRV.

If you are installing a regulator in a home that does not already have one, the steps for installation are more complicated. Unless you are experienced with plumbing, you will want to hire a professional. Installation often involves relocating the shut-off valve of the home to create space for the regulator. If you are comfortable enough to install the regulator yourself, follow these steps:

Homeowners are usually very excited to learn that radiant heating systems require very low maintenance and can last up to 100 years. While boilers and pumps which heat and push water throughout the PEX tubing hydronic heating systems may require occasional maintenance to extend the longevity of the floor heating system, the tubing installed into the concrete slab generally does not require any upkeep.

Radiant floor heating provides a similar effect in your home or office. Electric heating coils or water-heated PEX tubing are installed into the concrete slab before it is poured. Through the process of radiant heating, the thermal mass of concrete is transformed into a radiator of warm, even heat. Heat then radiates upward from the floor to evenly warm the room.

By purchasing radiant floor heating, you also may qualify for green building points under the Leadership in Energy and Environmental Design (“LEED”) program and the National Association of Home Builders Green Building Program.

Heated polished concrete floors offer several major health, environment, and savings benefits. Consider the following advantages of radiant floor heating over unheated concrete floors:

City water fluctuates in pressure depending on demand for water elsewhere. As a result, your home’s water pressure will be unstable if the regulator is not working. If you are unable to use multiple water outlets at the same time because of low water pressure, your PRV may be the culprit.

Cost to install water pressure reducing valveaustralia

From the sheer durability to their inherent sustainability, polished concrete floors can be an excellent choice for your office or home. There’s one particular feature that can make your polished concrete floors even more sustainable and comfortable and that’s radiant floor heating.

Homeowners often notice low water pressure when it affects their household fixtures like weak showerheads and faucets, but high water pressure can often be overlooked. Not only is high water pressure less noticeable to the eye than low water pressure, but it is far more costly if it persists over time. A water pressure regulator is a device that prevents high water pressure from wreaking havoc on your home’s plumbing. With a working pressure regulator in place, you can have peace of mind knowing that your pipes and appliances are protected. In this article, you can find information on what pressure regulators are, how they work, how to install one, how much they cost, and which regulator is best for your home.

Radiant floor heating mimics a heating process that occurs naturally in our environment. It is a simple and easy way to provide consistent heat in your home or office.

While you will need to investigate these opportunities further, the fact remains that radiant floor heating is an attractive choice if you want to both help maintain our environment and keep a few extra dollars in your pocket. Combined with the inherent sustainability of polished concrete floors, you will certainly be doing your part to protect our world.

Professional installation of a polished concrete floor with underfloor heating is certainly an investment that requires a bit more upfront costs compared to the installation of an unheated floor, but is it worth it?

If your water pressure is too high or low and you already have a PRV in place, you may simply need to adjust it to the correct pressure. To adjust your water pressure regulator, follow the steps below.

A water pressure regulator, also known as a pressure-reducing valve (PRV), is a valve that reduces water pressure as it passes into a home. When water enters a home through the main water line, its pressure is typically too high for the home’s plumbing to handle. Pipes and water-reliant appliances that experience high water pressure can deteriorate over time. A PRV protects a home’s water systems from damage caused by constant high water pressure.

Cost to install water pressure reducing valvebunnings

Water pressure regulators must be replaced about once every 4 to 12 years. While some PRVs may last longer than others, manufacturers recommend swapping out your regulator at least once every 5 years to prevent damage. Your home will show signs when your regulator may be failing. If you notice any of the symptoms listed below, you will want to inspect your pressure regulator and monitor it closely.

The Watts lead-free pressure regulators are excellent regulators for any home. They effectively protect your home’s plumbing from high incoming water pressure. They are constructed with a lead-free brass body and feature a reinforced diaphragm for protection against high temperatures. They come in both ¾” and 1”, giving you sizing options that will fit your home’s existing plumbing.

Replacing a water pressure regulator is a simple task. Regulators from the same manufacturer do not typically change in size over time, so purchasing the same brand as the old regulator should ensure a proper fit. You can replace your regulator with these simple steps:

Concrete floor heating solutions offer a wealth of benefits including energy savings, cost savings, and a host of environmental benefits, too. By leveraging radiant floor heating, you’re contributing to global sustainability. All of these benefits are experienced regardless of whether or not you already have a polished concrete floor that requires a heating solution.

Radiant heated concrete floors also offer a wide range of environmental benefits. In addition to reducing forced-air energy use, radiant floor heating requires minimal building materials as there is no ductwork to conceal. The result is a smaller environmental footprint for your home or office.

Water pressureregulator

Craftsman Concrete Floors has promoted eco-conscious flooring for homes and businesses since 1999. Our facilities run on 100% renewable energy, and we offset vehicle emissions with carbon credits.

When a pressure regulator breaks, it is unable to lower water pressure as it enters the home. As a result, you may notice water pressure that is much stronger than normal. Before giving up on your current regulator, you can try to lower its pressure by adjusting its external screw. If this adjustment does not solve the problem, your PRV likely needs a replacement.

A bad water pressure regulator can cause water to wreak havoc on your plumbing, so knowing the early signs of a bad regulator and taking preventative action before damage can be done are important in maintaining the health of your home. If you see any of the below symptoms in your home, your regulator may need to be replaced.

Without a PRV, a home’s pipes are subject to constant strain that deteriorate them over time. This can cause cracks to form in the pipes, eventually leading to water damage in the home. In homes with high water pressure, regulators are essential to keeping pipes and appliances running smoothly. Installing new plumbing or repiping your home costs thousands of dollars. It is also a very disruptive inconvenience, so addressing elevated water pressure before it damages your plumbing will ultimately save you money and hassle.

With the installation of radiant floor heating in your polished concrete floors, you will notice that the room’s temperature is constant. In fact, the temperature may feel even more constant than that of a standard forced-air system since forced-air systems release warm air that rises, cools, and then falls to the floor resulting in a mixed thermal environment.

These systems are referred to as radiant floor heating due to the scientific nature of the warming process in which heat from the concrete slab rises evenly from floor to ceiling resulting in a more uniform temperature than would be provided by forced-air systems.

Radiant floor heating is suitable for new builds and remodels in which a concrete floor or subfloor is installed. Several radiant heating styles, including electrical radiant floor heating and hydronic radiant floor heating systems are available, depending on your project needs.

pressurelimitingvalve- bunnings

Leaky pipes are caused by high water pressure, but you may notice a leaky pipe before you see high water pressure coming from a fixture. High water pressure wears down pipes over time, eventually causing them to crack in some places. A leaky pipe can be a sign that your pressure regulator has failed to lower the pressure of incoming water. The first leak will likely form at the regulator itself, so checking for pooling water under your regulator can help you identify a problem early. If you notice a bad PRV too late, your home can experience costly water damage.

To learn more about radiant floor heating in polished concrete floors, don’t hesitate to schedule a consultation. You can also email us at info@craftsmanconcretefloors.comor call (214) 663-5848.

Ultimately, whether or not you have existing polished concrete floors, radiant floor heating is an option for your home or office building. Ask your concrete floor specialist about concrete floor heating options that are most suitable for your project

If you suspect your hydronic heating system has a damaged pump or boiler, be sure to seek repair in a timely manner to prevent potential damage to other parts of the radiant floor heating system. With minimal essential maintenance, radiant floor heating systems can keep your concrete floors comfortably heated for many years to come.

Craftsman Concrete Floors provides innovative, eco-friendly concrete flooring services for both residential and commercial projects across Texas.  Whether designing a new build or renovating an existing space, our experienced team is committed to delivering meticulous customer service and satisfaction, segment-leading expertise, and an equally stunning and sustainable finished product.

General water pressure regulators start at around $60, while more expensive options can cost multiple hundreds of dollars. If you wish for a plumber to install your regulator for you, the installation will cost around $350. While this may seem expensive, the lack of a pressure regulator can cost you thousands of dollars in water damage if your home’s water pressure is too high.

Water pressure regulators contain an internal diaphragm and spring that water must travel through before entering a home’s plumbing. The higher the water pressure that enters the regulator, the greater the pressure put on the spring. This causes less water to pass through the regulator, effectively reducing the water pressure as it enters the home’s pipes. The water pressure allowed into the home can be changed by adjusting the tension of a screw on the exterior of the regulator.

Beyond these basic heating and health benefits, radiant floor heating in polished or stained concrete floors can save you cash. Quite obviously, this is because you don’t need to invest in an external heater or forced-air system. But along with this, radiant floor heating in polished concrete floors consumes less energy while simultaneously offering the same level of heat and comfort.

This has massive ramifications. Instead of making that initial purchase and paying small, yet recurring costs in your electric bill, radiant floor heating only requires one upfront investment. Once it is installed in your home or office, you won’t have to make additional, recurring payments. In fact, according to one study by the U.S. Department of Energy, radiant floor heating can lower heating costs by 25 to 50 percent. This is real money in your pocket and can make a significant difference if you are looking to heat a large home or office building.

If you hear thumping or vibrating coming from your walls, your pipes may be experiencing high water pressure. Catching this before the pipes begin leaking is crucial in preventing water from damaging the interior of your home. However, loud pipes are not a clear-cut sign of a bad pressure regulator. Many factors, such as new appliances, solenoid valves, and a bad expansion tank, can contribute to noisy pipes. If your home’s pipes are making noise, listen for the noise next to your regulator. If the noise is noticeably louder, your PRV is most likely at fault.

Rising energy costs alone make investing in radiant floor heating a smart choice simply because homeowners can save long-term on home heating costs compared to forced-air heating systems.

Austin Concrete Overlay Concrete Polishing Dallas Texas floor covering warehouse flooring for warehouse overlay Polished Concrete polished concrete floors polished concrete floors texas Residential Concrete Polishing Residential Floors sealed concrete Stained Concrete Stained Concrete Floors Urethane Cement warehouse concrete floor warehouse floor coating warehouse flooring options

Concrete floor heating solutions can be incorporated into existing polished concrete floors or into new builds in which concrete floors and finishes are planned. Hydronic radiant heat options can easily be incorporated into a new build or addition prior to pouring the concrete slab, whereas electric radiant heat options offer a suitable choice for adding warm, radiant heat to an existing polished concrete floor.

Investing into heated concrete floors allows you, your family, or your colleagues to focus on work or play without the distraction of a cold room. Concrete floor heating is even appropriate in Texas where the weather can turn colder at certain times of the year.

If your home has a water pressure regulator, it should be located near the main shut-off valve. The PRV should be located directly next to the valve. If you are unable to locate your valve, check your basement, garage, or downstream from your water meter if your home has one. If you live in a region with a cold climate, your valve will be located in a warm area to prevent freezing. Odd construction may cause the valve to be installed in an unusual place. If you cannot find the shut-off valve in any of these locations, your home inspection report will list its location. If your home receives water from the city lines, you most likely have a pressure regulator already installed.