Local, Top Rated Diamond Certified Companies Related to Your TopicAlameda County PlumbersSonoma County Plumbers San Francisco PlumbersMarin County PlumbersSanta Clara County Plumbers

Recirculation pumpfor water heater

All things considered, installing a hot water recirculation pump in your home is a clear win-win. It substantially reduces waste, not only of water, but of your own time and money. So, what are you waiting for?

Recirculation pumpwashing machine

Causes of wait times What exactly causes wait times for hot water? And why do they vary from home to home? This boils down to two main factors:

Hot water is a modern convenience that most of us typically don’t think much about. However, if you have ever had to wait several minutes for the water coming out of the faucet to heat up, you may be interested in learning more about hot water recirculating pumps. Rather than only sending hot water to your faucet when you call for it, these types of systems ensure that there is always a steady supply of hot water ready to come out of the tap right away.

Even if the hot water recirculating pump you choose doesn’t come with a sensor or timer, your plumber can easily install one for you. This way, you’ll get all the benefits of having more control over your system without having to select an entirely new pump system.

Simple, mechanical timers are easy to install and even easier to set. However, you may be limited in how detailed you can get with your timing. If your schedule changes from one day to the next, an electronic timer will give you greater flexibility. You can typically program several scenarios to accommodate changes in your daily schedule, like from workdays to the weekend or if your schedule doesn’t follow the typical work week.

These causal factors are often exacerbated in homes built within the last 25 years. Why? Because newer homes tend to be larger, which creates increased distances between the hot water heater and water-dispensing fixtures. Furthermore, the plumbing systems in many modern homes were built with wide-diameter water pipes, as required by updated building codes. The result: Longer wait times and more wasted water.

Still not convinced? Even if you’re in favor of water conservation, it may not be a motivating factor for you, especially when it comes to making a financial investment. If that’s the case, consider these additional, practical reasons to invest in a hot water recirculation pump:

Recirculation PUMPpiping Diagram

When you operated the hot water tap the last time you needed it, the water shuts off as soon as you turn off the tap. However, the hot water had to travel from your water heater to the faucet for you to use. When you turned the tap off, there was still plenty of hot water in transit. With the faucet turned off, there is nowhere for that hot water to go, so it just sits there in your pipes. Over time, it will gradually lose its heat, leaving cold water behind in your hot water pipes.

It is also a good idea to insulate your hot water pipes, both heading to your faucets and back to the water heater. This will help to trap heat inside and prevent it from dissipating through the walls of the pipes over time. With proper insulation, the water will stay hotter for much longer, minimizing the number of times you have to run your pump throughout the day to keep hot water in the pipes at all times. This can result in major energy savings over time.

You should also take note of the size of the inlets and outlets. As calcium deposits form in the pipes, they can narrow these openings over time. The larger the opening, the easier it will be for water to continue to flow through. Even with a bit of buildup, you’ll still have plenty of water coming through, maximizing the amount of time between maintenance services.

Recirculation pumpinstallation

While waiting a few minutes to get hot water is more of an inconvenience than anything else, it can also be quite wasteful. Unless you collect that unused cold water in a bucket to reuse in your garden or elsewhere around your home, it all just goes straight down the drain. With a hot water recirculating pump, cold water sitting in your pipes will go back to the water heater, bringing new hot water to the faucet so that it is ready whenever you are.

It’ll save time. In this fast-paced day and age, we have less time to wait around for things, and that includes hot water. Plus, just as those small amounts of wasted water add up incrementally, so do the minutes spent waiting for hot water. Let’s say you spend two minutes each day waiting for hot water—over the course of a year, that amounts to 730 minutes, which means you’ll have squandered 12 hours standing by the tap. Like water, time is a limited resource, and a recirculation pump will allow you to utilize both more wisely.

When you have separate handles for hot and cold water, you expect hot water to come out of when you turn the hot handle and vice versa. So, why is it that you get a stream of cold water from your hot tap before the water heats up? The answer is that leftover water in the pipes has cooled over time.

Our friendly associates are always happy to answer your questions, so don’t be shy about reaching out if there is anything you don’t fully understand. We’ll set you up with a free consultation appointment to discuss your needs and preferences in greater detail. Call now to get started.

When choosing your hot water recirculating pump, your first decision should be whether you would prefer a full recirculating system or a comfort control system. Your budget and the configuration of your home will be among the most important factors in this decision. If plumbers can easily gain access to your pipe system and you can afford to pay a bit more, a full recirculating system will give you the greatest benefit, without the drawback of warming up your cold water on the return. To save money, time, and hassle, a comfort system may be the better option for you.

Related ArticlesThe Homeowner's Guide to Water Treatment, Wells & Pumps Get Expert Advice From Owners of Top Rated Local CompaniesBecome a Diamond Certified Preferred Member (Always Free)

You can combat this issue when you know you are going to need cold water by turning off the pump temporarily. This method is particularly effective during the summer. Because the weather is warmer during this time of year, you won’t need to run the pump as frequently to get hot water anyway, as the water already in the pipes will stay hot longer.

It’s surprisingly affordable. Perhaps the best reason to get a hot water recirculation pump is the fact that it’s not very expensive, as far as home improvements go. Roman Scanagatta, owner of Roman’s Plumbing, Inc. in Petaluma, breaks down the typical cost: “To do a retrofit recirculating system in one bathroom, the pump and labor together runs $695. Each additional zone is $250, so if you wanted to do your kitchen and another bathroom, it would cost another $500 on top of that.” Of course, as one plumber’s rate, these prices aren’t definitive. However, given a ballpark estimate of $1,200, retrofitting all your home’s water fixtures will likely cost less than your annual water bill—which, going forward, will be substantially reduced.

Pumps can be integrated as part of a new construction design or installed as a retrofit application. In the latter instance, the pump is spliced into the hot and cold water lines of the existing plumbing system.

Recirculation pumpGrundfos

So, what can you do? After all, you probably aren’t going to wash your dishes in cold water or start taking cold showers every day. You could use containers to catch the water, which is useful if you’re a gardener. However, if you don’t have any plants to irrigate, this may not be worthwhile (and it’s pretty inconvenient either way). Wouldn’t it be nice if there was a simpler solution?

During the installation process, your plumber will need to install additional piping throughout your home to carry the unused hot water back to the water heater. This can add to your installation cost considerably, especially if the pipes in your home are difficult to access. If you don’t want to weather the added cost, or if the installation would be too complex, you do have another option.

Water recirculatingpump

It’ll save money. As with most utilities, water rates have consistently risen over time, and particularly so in California, where residents pay some of the highest rates in the country. What’s more, rates are likely to rise further, and in some cases are already slated to. In San Francisco, for example, the Public Utilities Commission has approved incremental water and sewer service hikes over the next four years to finance improvements to the city’s water infrastructure. And it’s not just the big cities where water rates have and will continue to soar—even small communities are feeling the pinch of high prices.

Then, the next time you turn on the hot water, that cold water in the pipes has to make its way out before fresh hot water can come through. This is the cold water that you feel for the first minute or so after turning on the tap. Once the hot water has had enough time to make its way from the water heater to the faucet, forcing all of the cold water out along the way, you’ll get the hot water you need. The farther the distance between your water heater and faucet, the longer it will take for the hot water to reach you, and the more water you will waste in the process.

Here at Best San Diego Leak Detection, we are proud to include hot water services among our offerings. This includes installing, maintaining, and repairing water heaters and their associated accessories, like hot water recirculating pumps. We are experts at what we do and can help you narrow down your options to settle on the best recirculating pump to meet your needs and budget.

Recirculation pumpBell & Gossett

A low-flow sink aerator won’t reduce waste while waiting for hot water to arrive. Photo: American Ratings Corporation ©2018

Since the mid-20th century, water conservation has gone from being a fringe concept to a standard practice, which is why water-efficient plumbing fixtures and appliances are simply the norm nowadays. However, despite these developments, there’s one case of water waste that remains widely ignored: wait times for hot water. Whether at the sink or the shower, the lapse between when hot water is turned on and when it arrives represents one of the leading causes of water waste today…and it’s time we started addressing it.

California is known for having hard water, and if you don’t have a water softener installed in your home, the minerals in the water can wreak havoc on your hot water recirculating pump. To help it last as long as possible, look for pumps made from stainless steel to minimize the risk of corrosion and prevent calcium deposits from forming.

To minimize water waste while waiting for hot water, you can have a recirculating pump installed on your water heater. These pumps return any unused hot water to your water heater to maintain its temperature while also sending fresh hot water to your faucets so that you don’t have to wait for the water to heat up. Hot water recirculating pumps generally fall into two primary categories.

Considering the ever-increasing cost of water, it makes clear financial sense to invest in water-saving strategies, and to do so where they’ll have the biggest impact. Since a hot water recirculation pump can save an estimated 16,000 gallons per year in a four-person household, there’s no better place to start.

But the shower isn’t the only place where hot water gets used. If you’re like most people, you prefer to wash your hands (as well as your dishes) in hot water—a wise practice, as it cleans more effectively than cold water. So, let’s assume you wait for hot water at a sink at least twice a day, your faucet has a 1.5 gpm flow rate and it takes a full minute for hot water to arrive. This comes to three gallons per day or 1,095 gallons annually. Add this to the total wasted annually for showering and you’re looking at roughly 2,000 gallons of water wasted per year.

Grundfosrecirculation pumpwith timer

Of course, the figures we’re using here are merely for the sake of example—in reality, wait times for hot water vary considerably from home to home. However, while generalized, these figures are by no means unusual, and in some cases they may be modest in comparison to actual levels of waste. One thing is for sure: These levels of waste are substantial and need to be addressed.

Timers give you even greater control over when your system operates. For example, you can program your system to automatically turn off after a specified time in the evening so that it isn’t running while you are sleeping. You can also program the schedule to turn the system off when you are at work or go out of town on vacation.

The solution: Hot water recirculation A hot water recirculation pump is a device that cuts wait times for hot water down from minutes to a few seconds. It does this through a complex process of recirculation, which consists of two simultaneous actions:

Once you have selected the style of system you would like, your next step is to choose a sensor or timer to control it. If you don’t want to have to worry about programming your system, a sensor can do the job for you by monitoring the water temperature in your pipes. To maximize the efficiency of your system, though, you’ll want to have the greatest possible control over when your system operates. For this, you’ll need a timer.

Because of frequent drought conditions and water restrictions here in California, the state’s Building Energy Efficiency Standards now require all new homes to include hot water recirculating pumps if they have any faucets that are farther than 50 feet from the water heater. The goal of this policy is to prevent water waste as homeowners wait for the hot water to arrive. Even if your home is older and not required to follow this new rule, it can still be a good idea to make the switch. Here’s what you need to know.

For starters, the size of your pipes plays a major role. Pipes with larger diameters can carry a lot more water than their narrower counterparts, so you’ll see the greatest savings if you have pipes that are on the wider side. The distance between your water heater and faucets is important as well. If your hot water previously had to travel a long way to reach the tap, your savings will be higher than if your faucets were closer to the water heater.

With the substantial amount of water they save, recirculation pumps represent a clear solution to the problem of wait times for hot water. If this solution were adopted on a wide scale, the total savings would be incalculably significant. That’s why, in an age when water is becoming increasingly scarce, every home should have a hot water recirculation pump.

By performing this dual process, a hot water recirculation pump can deliver near-instant hot water and conserve thousands of gallons of water per year, per fixture.

If you are concerned about how this constant operation might affect your energy costs for heating the water, there is no need to be. While the system is capable of running continuously, it doesn’t always do this. Most hot water recirculating pumps come with sensors or timers to regulate operation. Sensors can detect the temperature of the hot water in the pipe, only running the recirculation pump when the temperature drops below a specified level. This way, the water won’t keep circulating when the water is already warm, typically stopping itself after one complete cycle.

In terms of energy efficiency, an on-demand hot water recirculation pump is far and away the best option. Some recirculation systems have pumps that run constantly or on a timer, but both types inevitably waste energy. In contrast, a button-activated, on-demand model only functions as needed, which minimizes energy expenditures.

To avoid having to install new pipes, you can opt for a hot water recirculating pump that sends unused water back to the water heater through your cold water pipes rather than through a separate pipe system. This option is much more cost-effective and easier to install, making this style of system accessible to a wider range of homeowners. However, you’ll still get the benefit of fast hot water when you need it.

By eliminating wait times for hot water, a recirculation pump conserves thousands of gallons of water per year. Photo: Mason Plumbing, Inc. ©2018

In this type of system, your plumber will install additional hot water pipes in your home. These pipes can then return the unused hot water to the water heater. As the cooling hot water makes its way back to the water heater, new hot water can take its place so that it is always ready to go when you need it. The hot water flows through a continuous loop throughout your system so that there is a steady supply of hot water, minimizing your wait time and water waste.

Wait = Waste By doing some simple math, we can get a clear picture of how much water is actually wasted by wait times for hot water. Let’s assume you have a generic low-flow showerhead that emits 2.5 gallons per minute (gpm) and it takes one full minute for hot water to arrive. That’s 2.5 gallons wasted per shower. Now, assuming you shower every day, let’s multiply that by 365—now you’re up to 912.5 gallons annually. Multiply that by 10 and that’s 9,125 gallons wasted over the course of a decade.

Other locations served: San Diego, La Jolla, Coronado, Pacific Beach, Delmar, Encinitas, Solana Beach, Rancho Santa Fe, Carlsbad, Poway and Oceanside.

While the most obvious benefit of hot water recirculating pumps is that you’ll have access to virtually instant hot water from every sink in your home, you’ll also be saving a lot of water. Because there are so many factors that go into calculating the water savings, it is difficult to quantify exactly how much you’ll conserve, though some estimates place the amount as high as 15,000 gallons per year. However, certain factors can increase or reduce your savings.

Comfort systems do come with one major drawback, though. Because the hot water will flow back to the water heater through the cold water pipes, the water that comes out of the cold tap at first will likely be warmer than you are used to. It may also take a few moments for the water to get truly cold. In most cases, this won’t be much of an issue, as lukewarm water is perfectly fine for many applications around the house, like cleaning and cooking. However, if you use your tap to provide drinking water, you may have to wait until the water is cool enough to be palatable.