Thermostatic Mixing Valve28mm

The temperature of the supplied hot water must be at least 5K above the desired blended water temperature for the JRGUMAT thermostatic mixing valve to function properly. Balanced hydraulic conditions at the hot and cold water inlet are crucial.

The thermostatic mixing valve works without outside energy. When integrated into a circulation system, the amount of hot water needed to cover heat losses is fed back into the storage tank or hot water generator. The rest is fed directly into the mixer.

The JRGUMAT thermostatic mixing valve is also used as a thermal switch, for example in heat exchangers and hygiene storage tanks with different water temperature ranges.

Thermostatic mixing valveadjustment

If ultra pure water is not good for you to consume in large amounts, then why is it even being created? One obvious reason is for chemists and other scientists to use when they need completely pure water for a reaction or experiment.

Thanks to their high control accuracy, JRGUMAT thermostatic mixing valves can be used for special applications, as regulating elements for maintaining temperatures or for processes requiring a constant water temperature. Wherever hands are not free to individually adjust the water temperature via a mixer tap, blended water set to the desired temperature comes in handy.

Excessively hot water can scald the skin. The maximum hot water temperatures at tapping points such as faucets or shower heads should therefore be limited. Because skin damage occurs within minutes at a water temperature of between just 45 and 51°C, within seconds at 51°C and above, and within a split second at over 70°C. In buildings with sensitive uses such as hospitals, care homes, schools and nurseries, but also within in hotels or apartments, the hot water can be set to a safe maximum temperature with the JRGUMAT thermostatic mixing valve.

Thermostatic Mixing Valve15mm

When water is heated using solar energy, pellet stoves or log heaters for example, high temperatures can occur in the hot water tank. The JRGUMAT thermostatic mixing valve regulates the hot water to the desired temperature.

Advanced Water Solutions offers free water evaluations to help you determine if you need more filtration in your home or business – just call 805-793-1224. If you want more information on water filters, check out AWS’s blog that goes over the pros and cons of whole house water filter systems vs pitcher filters!

Ultra pure water can be purchased online, but not for the purpose of drinking. If that’s what you’re looking for, then it’s best to stick to the other sources of water you’re probably already using. If you’re concerned about the quality and purity of your water, a filtration system might be your best option. Filters and water softeners remove impurities and contaminants from your drinking water without stripping it of minerals completely.

For advice, please contact your local technical customer services team or representative. We will be happy to advise you on the correct application and installation specifications.

Thermostatic mixing valvetemperature setting

The installation instructions must be followed to ensure trouble-free function of the JRGUMAT thermostatic mixing valves. The local standards and guidelines must be observed

Thermostatic Mixing ValveBath

Advanced Water Solutions is a member of the Santa Barbara and Ventura Better Business Bureau (BBB) and the Water Quality Association (WQA). In March of 2011 AWS was recognized as a Hall of Fame Member with the BBB for a record of no outstanding complaints.  Jay Hellenbrand is a certified Water Specialist, Certified Installer, and has specialty certifications in Reverse Osmosis, Deionization, Filtration, and Ultra filtration. Jay also carries a California State Contractors License. Advanced Water Solutions also meets California's requirement for water softeners to have a salt efficiency rating of at least 4,000 grains of hardness removed per pound of salt used in regeneration.

JRGUMAT 3400 thermostatic mixing valves are currently available with factory-set standard temperatures (25/40/48/55°C). The individual settings range from a minimum of 20°C to a maximum of 65°C. Other types covering additional temperature ranges are available. It is possible to change the blended water temperature setting within the specified setting ranges of the respective thermostatic mixing valve.

This water is especially helpful for making semiconductors. These are the wafer-like microchips that are used in everything from MRI scanners to the singing greeting cards you find at the store. These chips are built and layered in steps, and each time a step is completed, the chip needs to be cleaned. Using ultra pure water to vacuum up the debris is the best way to ensure that the microchip is completely clean before the next one is layered on top of it.

Thermostatic Mixing Valvetap

Having some minerals in your drinking water is fine, and can actually be good for you. After the drinking water filtration process, we expect to have some mineral residues left. Ultra pure water can be harmful to your health if you drink too much of it. Below, Advanced Water Solutions will look at what it means for water to be too pure and how it can do more bad than good for your health.

The JRGUMAT thermostatic mixing valve is an open architecture, proportionally regulating three-way mixer made of gunmetal. The blended water temperature is transferred to the thermostat. This compares the temperature with the set point. If the blended water temperature does not match the set point, the volume in the thermostat changes. This causes the valve slide to move across the pin so that more cold or hot water can flow in as required, until the blended water temperature matches the set point.

With the JRGUMAT thermostatic mixing valve from GF Piping Systems, mixed water with a constant temperature can be ensured in an energy-efficient manner - wherever this is desired or required. It is used in different system sizes and applications. The JRGUMAT thermostatic mixing valve is extremely durable and has proven its worth for decades.

·The JRGUMAT can protect against scalding where set to do so. The high control accuracy also ensures safety in production processes with defined temperature specifications.

The best glass of water is the one that’s crisp, cold, and clear. Nothing tastes better than a clean, cold glass of ice water to quench your thirst when you need it most. Everyone knows that you don’t want to just go fill up a cup of water directly from an un-filtered source (unless you want a waterborne illness for some reason). Water needs to be filtered to help eliminate the extra minerals, dirt, parasites, and other contaminants that you don’t want to put in your body. But is there such a thing as too pure when it comes to drinking water?

Thermostatic mixing valvehow it works

On farms, for example, the JRGUMAT thermostatic mixing valve regulates the water temperature of drinking troughs for livestock or during feed preparation.

Thermostatic Mixing Valve22mm

Another purpose for this pureH2O is as a super cleaner. Ultra pure water is created to clean small electronics like microchips. Since the water molecules act as a sponge, it takes in surrounding minerals and debris. What better way to clean these small electronics than with ultra pure water that will go in acting like a microscopic vacuum and sucking up all the dirt and particles?

If you do drink a glass of ultra pure water, you won’t have an immediate bad reaction, but the water will pull some minerals out of your body. As the pure water flows through you, it will attract molecules that should stay there. Essentially, if you only drink ultra pure water, you would lose many important electrolytes. Pure water acts as sponge and soaks up what’s around it, meaning that if you drank nothing but ultra pure water, the water would drink you back. So what good is ultra pure water if it shouldn’t be used for drinking?

Ultra pure water has no trace of minerals or anything else other than H2O molecules in it. It’s not that this kind of water is inherently ‘bad,’ but H2O doesn’t like to be ultra pure. Because of the bent chemical makeup of this molecule, it has parts that are positively charged and parts that are negatively charged, making it attract to its neighbors easily, including other types of molecules.

The housing of the JRGUMAT thermostatic mixing valve is made of low-lead gunmetal. This alloy complies with the current EU lead limits and may be installed without hesitation until 2036 and used afterwards. Click here for more information on the conversion of the product range to lead-free materials.